USDT ERC20 to BTC: Swap Tether on Ethereum to Bitcoin, No KYC
Holding USDT on Tron? Use USDT (TRC20) to BTC.
To swap USDT ERC20 to BTC, enter the amount, add the Bitcoin payout address (bc1, 3 or 1 at the start) plus the 0x address the Tether leaves from, and transfer the USDT over Ethereum to the one-time deposit address; keep some ETH beside the USDT for gas. You never open an account or show ID, and the Bitcoin is sent out after Ethereum has confirmed your USDT deposit, usually within about 2 to 5 minutes.
- Within minutes
- No account · No KYC
- Paid to your wallet
- Fees included in quote
By clicking Confirm exchange, you agree to the Privacy Policy & Terms of Service.
Data by CoinGecko
USDT (ERC20) to BTC Exchange Rate
The 1 Tether (USDT) on Ethereum to Bitcoin reference rate at market prices, before fees.
USDT to BTC swap at a glance
Send USDT from MetaMask, Rabby or a Ledger.
It is a cross-chain swap from Ethereum to Bitcoin, with no bridge and no wrapped tokens.
- Send USDTAbout 2–5 minutes to confirm on Ethereum
- GhostSwap swaps itAt the floating rate, fees already in the quote
- Receive BTCSent to your address; Bitcoin confirms in one to three blocks
How much BTC do you get for USDT?
GhostSwap quotes at 17 Nov 2026, 18:26 UTC, after the service fee and the cost of sending the BTC to your wallet.
The rate floats with the market until your USDT deposit confirms.
Sending Tether from an Ethereum wallet
Tether on Ethereum is a token, and moving a token is a contract call that Ethereum bills in ETH. Your wallet charges this gas separately from the Tether itself, which keeps the deposit equal to the figure in the box. With an empty ETH balance, MetaMask and Rabby will not let the transfer through at all.
Gas is set by demand for block space, so 30 USDT and 30,000 USDT cost roughly the same to send. On a small swap that fixed cost is a bigger share of the total, which is worth knowing if you only want to move a few dollars.
Before you sign, check two things in the confirmation step: the network should read Ethereum, and the token should be USDT. Wallets that switch between chains sometimes keep the last one you used. A plain transfer is all this swap needs; no approval or allowance is involved. Expect the deposit to confirm within about 2 to 5 minutes; Etherscan lists it under your transaction hash.
Which Bitcoin address to give
The payout is native BTC on the Bitcoin blockchain, so it needs a Bitcoin address. Modern wallets show one that starts with bc1. Older formats starting with 3 or 1 also work. All of them can receive from this swap.
Copy it from a wallet whose recovery words you hold: Sparrow, Electrum or a hardware wallet such as a Ledger or Trezor. With a hardware wallet, open the receive page on the device itself and check that it shows the same characters as your computer. That one step defeats clipboard malware that swaps the address you paste.
An Ethereum address will not work here, even in a wallet that holds both coins. Multi-coin apps list several addresses close together, and picking the 0x one by habit is an easy slip. A Lightning invoice will not work either: the BTC goes out as a normal on-chain payment.
When the BTC reaches your wallet
With the USDT deposit confirmed, most swaps finish within minutes. The BTC then appears in your wallet as an unconfirmed incoming payment. It becomes confirmed when a miner includes it in a block, and Bitcoin produces a block about every 10 minutes on average, sometimes much sooner and sometimes far later.
The status page gives you the payout transaction ID. Paste it into mempool.space to watch it enter a block, or check the address itself to see the amount received.
If you plan to keep the BTC long term, this is a good moment to tidy up. Write down which swap the coins came from using the label feature in Sparrow or Electrum, and move larger amounts to a hardware wallet. Labels stay in your wallet file only and make later bookkeeping much easier.
Your USDT is on another network? Pick the matching pair
| Where your Tether sits | Your sending address looks like | Fee paid in | Swap to BTC with |
|---|---|---|---|
| Ethereum, as ERC-20 | 0x plus 40 hex characters | ETH | You are on it |
| Tron (TRC20) | Begins with T, 34 long | TRX or energy | USDT TRC20 to BTC |
| BNB Smart Chain (BEP20) | 0x, identical to Ethereum | BNB | USDT BEP20 to BTC |
| Solana | Letters and digits, no 0x | SOL | USDT SOL to BTC |
Each row is its own token on its own chain, and the deposit address you get here accepts only the Ethereum one. The row to watch is BEP20, because a 0x address gives no clue which chain it belongs to. Check the network your wallet or exchange lists for the balance. If it says Tron, the TRC20 pair is usually the cheaper way in, since Tron fees are far lower than Ethereum gas.
Refunds and following your swap
The sender field is not just a formality. It is where a failed swap pays back: if a swap cannot be completed, the USDT returns to the Ethereum address you typed as sender. So that 0x address must belong to a wallet you control.
This matters most for people whose Tether sits on an exchange. A withdrawal comes out of the exchange's pooled hot wallet, not an address tied to you, and tokens sent back there may never show up in your balance. Withdraw to MetaMask, Rabby or a Ledger first, then start the swap from that wallet.
You get a swap ID and a status page that moves from deposit to exchange to payout. Because both chains are public, you can check each half yourself: the USDT on Etherscan and the BTC on mempool.space. If Etherscan shows the deposit as confirmed while nothing moves on the status page for a long while, send support@ghostswap.io the swap ID together with the Ethereum transaction hash. Do not repeat the deposit while you wait.
Why people move Tether into Bitcoin
USDT is built to hold a dollar value, which makes it useful for short stays and less suited to long-term savings. Tether, the issuer, can freeze USDT at any address, on Ethereum as on every other chain it runs on. Bitcoin has no issuer and a fixed supply, so some holders move part of their stablecoin balance into BTC once they decide to keep it for years.
Others are simply rotating: they parked profits in USDT during a drop and now want to be back in Bitcoin. Doing it as a swap means the coins go from your Ethereum wallet to your Bitcoin wallet without an exchange account in between. GhostSwap is one of the no-KYC crypto exchanges that work this way, with no sign-up and no ID.
The trade-off is volatility. A USDT balance stays near one dollar, while BTC can move sharply in a day. Check the Bitcoin price before you decide how much to swap.
Common mistakes
- Starting the transfer with no ETH in the wallet that holds the USDT, so it cannot pay gas.
- Sending BEP20 Tether from BNB Smart Chain because the 0x deposit address looks the same.
- Pasting the Ethereum address of a multi-coin wallet in the Bitcoin payout field.
- Sending USDT straight from an exchange balance, so the refund address is the exchange's, not yours.
- Treating an unconfirmed BTC payout as lost instead of waiting for the next Bitcoin block.
Going the other way? ![]()
Swap BTC to USDT ERC20
Other ways to get Bitcoin (BTC)
More USDT swaps
Live prices: Bitcoin price today
USDT to BTC Live Price Chart
USDT (ERC20)/BTC
Reference market prices, updated live
Convert Tether (USDT) on Ethereum to Bitcoin
| USDT (ERC20) | BTC at market price |
|---|---|
| 31USDT (ERC20) | 0.000485BTC |
| 50USDT (ERC20) | 0.000782BTC |
| 100USDT (ERC20) | 0.001565BTC |
| 250USDT (ERC20) | 0.003912BTC |
| 500USDT (ERC20) | 0.007824BTC |
| 1,000USDT (ERC20) | 0.015648BTC |
| 5,000USDT (ERC20) | 0.078239BTC |
| 10,000USDT (ERC20) | 0.156477BTC |
At market prices of $0.999294 per USDT (ERC20) and $63,862.00 per BTC (17 Nov 2026), 500 USDT (ERC20) is worth about 0.007824 BTC.
Convert Bitcoin to Tether (USDT) on Ethereum
| BTC | USDT (ERC20) at market price |
|---|---|
| 0.0005BTC | 31.9536USDT (ERC20) |
| 0.001BTC | 63.9071USDT (ERC20) |
| 0.002BTC | 127.8142USDT (ERC20) |
| 0.005BTC | 319.5356USDT (ERC20) |
| 0.01BTC | 639.0712USDT (ERC20) |
| 0.02BTC | 1,278.14USDT (ERC20) |
| 0.1BTC | 6,390.71USDT (ERC20) |
| 0.2BTC | 12,781.42USDT (ERC20) |
Going the other way, 0.01 BTC is worth about 639.0712 USDT (ERC20) at the same prices.
How to Exchange Tether (ERC20) to Bitcoin
Select USDT and BTC
Pick USDT in “You send” and BTC in “You get”, then enter the amount.
Enter Bitcoin Address
Paste the Bitcoin address that should receive the BTC. Then enter the Ethereum address you send USDT from; a refund, if ever needed, goes there.
Send Tether (ERC20)
Send exactly the amount shown from your own Ethereum wallet to the one-time deposit address. Keep a little ETH in that wallet for the network fee.
Receive Bitcoin
Your BTC arrives on Bitcoin. Follow each step on the status page with your swap ID.