ETH to XMR: Swap Ethereum for Monero Without KYC
Pick ETH and XMR in the box, paste a Monero address from your own wallet, add the Ethereum address you are sending from, and transfer native mainnet ETH to the one-time deposit address. Nobody asks for an account or ID, and the XMR goes out once the ETH deposit has confirmed, which on Ethereum usually takes about 2 to 5 minutes.
Updated 16 November 2026
- Within minutes
- No account · No KYC
- Paid to your wallet
- Fees included in quote
1 ETH = 3.5498 XMR
Rate as of · market rate, before fees
By clicking Confirm exchange, you agree to the Privacy Policy & Terms of Service.
Data by CoinGecko
ETH to XMR Exchange Rate
The 1 Ethereum to Monero reference rate at market prices, before fees.
ETH to XMR swap at a glance
Send ETH from MetaMask, Rabby or a Ledger.
It is a cross-chain swap from Ethereum to Monero, with no bridge and no wrapped tokens.
- Send ETHAbout 2–5 minutes to confirm on Ethereum
- GhostSwap swaps itAt the floating rate, fees already in the quote
- Receive XMRSent to your address; Monero confirms in about 20 minutes (10 confirmations)
How much XMR do I get for ETH?
GhostSwap quotes at 18 Nov 2026, 09:24 UTC, after the service fee and the cost of sending the XMR to your wallet.
The rate floats with the market until your ETH deposit confirms.
ETH to XMR at the market rate, before fees
| ETH | XMR, market rate, before fees |
|---|---|
| 0.017 ETH | 0.060347 XMR |
| 0.02 ETH | 0.070997 XMR |
| 0.05 ETH | 0.177492 XMR |
| 0.1 ETH | 0.354984 XMR |
| 0.2 ETH | 0.709967 XMR |
| 0.5 ETH | 1.7749 XMR |
| 2.5 ETH | 8.8746 XMR |
| 5 ETH | 17.7492 XMR |
Market prices of $1,766.54 per ETH and $497.6400 per XMR on 18 Nov 2026. The box above shows the amount after all fees.
ETH to XMR price chart, market rate before fees
ETH/XMR
ETH to XMR
| ETH | XMR |
|---|---|
| 0.1 ETH | 0.354984 XMR |
| 0.5 ETH | 1.7749 XMR |
| 1 ETH | 3.5498 XMR |
| 5 ETH | 17.7492 XMR |
| 10 ETH | 35.4984 XMR |
At the current rate, before fees. Large swaps can get a different rate; the swap box shows the exact amount.
XMR to ETH
| XMR | ETH |
|---|---|
| 1 XMR | 0.281703 ETH |
| 5 XMR | 1.4085 ETH |
| 10 XMR | 2.8170 ETH |
| 50 XMR | 14.0852 ETH |
| 100 XMR | 28.1703 ETH |
At the current rate, before fees. Large swaps can get a different rate; the swap box shows the exact amount.
ETH to XMR for larger amounts
Today's maximum for one swap and the rate at each size. GhostSwap quotes at 18 Nov 2026, 18:07 UTC, after the service fee and the network fee.
| You send | You receive | Rate per ETH | Against the smallest size |
|---|---|---|---|
| 1 ETH | about 3.53 XMR | 3.5300 XMR | reference |
| 10 ETH | about 35.2896 XMR | 3.5290 XMR | 0.03% less per coin |
| 50 ETH | about 176.17 XMR | 3.5234 XMR | 0.19% less per coin |
| 509.59 ETH (today's maximum) | about 1,770.7 XMR | 3.4748 XMR | 1.57% less per coin |
GhostSwap's fee is the same for a large swap as for a small one. A very large order can move the quoted rate, so the rate per coin can be lower in the last rows. Above today's maximum, split the amount into several swaps. The rate floats with the market until your ETH deposit confirms.
How do I exchange ETH to XMR?
Pick ETH and XMR
Pick ETH in “You send” and XMR in “You get”, then enter the amount. The box shows how much XMR you get after all fees, and the minimum for this pair.
Paste your Monero address
Paste the Monero address that should receive the XMR: it is 95 characters and starts with 4 (standard) or 8 (subaddress). Wallets that work: Feather, Cake Wallet or Monero GUI. Then enter the Ethereum address you send ETH from; a refund, if ever needed, goes there.
Send ETH on Ethereum
Send exactly the amount shown from your own Ethereum wallet to the one-time deposit address, on the Ethereum network.
Receive XMR
Your XMR is paid out once your ETH deposit confirms, and Monero then confirms it in about 20 minutes (10 confirmations). Most swaps finish within minutes. The exact time depends on how fast each network confirms your deposit. Follow each step on the status page with your swap ID.
What the ETH deposit address accepts
This page takes one asset: native ETH on Ethereum mainnet. An Ethereum address looks the same on every EVM chain (0x followed by 40 hexadecimal characters), so a wallet will happily let you send the wrong asset or use the wrong network. The deposit address only credits the coin and chain the swap was created for.
| What is in your wallet | Where to swap it |
|---|---|
| ETH on Ethereum mainnet | This page |
| ETH on Base | ETH (Base) to XMR, a separate pair |
| ETH on another layer-2 (Arbitrum, Optimism and others) | Only if that network is listed in the box; it is not mainnet ETH |
| USDT, DAI or another ERC-20 token | The token's own pair, such as USDT ERC20 to XMR or DAI to XMR |
A layer-2 balance lives on its own chain, even though MetaMask shows it under the same 0x address. What is a layer-2? explains why it is not the same as mainnet ETH.
Gas: the cost of sending the ETH
Your wallet pays the Ethereum network fee, in ETH, on top of the amount in the quote. A plain ETH transfer uses 21,000 units of gas. The price per unit, in gwei, is a base fee set by the network plus a small tip to the validator, so the total depends on how busy Ethereum is at that moment, not on how much ETH you move.
Leave some ETH in the wallet after the deposit. If you press Max, MetaMask and Rabby hold back an estimate for gas, and the amount that actually leaves can differ from the one you typed into the swap box. It is cleaner to send the exact figure the box shows and keep the rest as a gas reserve.
If you set the tip too low, the transfer can wait in the pending queue. Both wallets have a speed-up option that resends the same transaction with a higher fee. Use it rather than sending a new deposit, because two transfers would mean two separate deposits to the same swap.
Receiving XMR when your wallets are all Ethereum wallets
MetaMask, Rabby and other EVM wallets cannot hold Monero, and a 0x address pasted into the Monero field will be rejected. You need a separate Monero wallet such as Feather on desktop or Cake Wallet on a phone. Setting one up takes a few minutes: write down the seed words, then copy an address from the Receive tab. Our Monero wallet guide compares the options.
A valid Monero address is 95 characters and begins with 4 or 8. The one starting with 4 is the wallet's main address; addresses starting with 8 are subaddresses, which you can create freely and which all feed one balance. Giving each swap its own subaddress keeps your Ethereum-funded payouts from sharing a receiving address.
If you use a Ledger for ETH, it can also secure a Monero wallet through Feather or Monero GUI, but the XMR is still received at a Monero address, never at your Ethereum one.
Once the XMR is sent: checking and spending it
You can follow your ETH deposit on Etherscan by its transaction hash. The Monero payout is different: explorers cannot tell you who received it or how much, so the only place to confirm it is your own Monero wallet. Open it and let it sync to the latest block before you look at the balance.
The XMR first appears as pending or locked. The Monero protocol makes every incoming output wait 10 blocks, roughly 20 minutes, before it can be spent again. That wait comes from the network itself and has nothing to do with the swap.
If you restored the wallet from its seed on a new device, check the restore height. A height set after the date of your swap makes the wallet skip the block that holds your payout. Set it to an earlier date and rescan, and the XMR will show up.
Refunds for ETH deposits
Any refund on this pair travels back over Ethereum, to the 0x address typed into the sender field. If a swap cannot be completed, the ETH is refunded to the sender address you entered. Use the 0x address of a wallet whose keys you hold. An exchange deposit address is a bad choice here, because exchanges often do not credit incoming transfers they did not expect.
Your swap ID opens a status page that tracks each step. If your deposit shows as successful on Etherscan yet the swap status stays unchanged for an unusually long time, email support@ghostswap.io with the swap ID and the transaction hash.
If you sent a token or used the wrong network by mistake, contact support with the same details, and do not try to fix it by sending again. Sending ERC-20 tokens or layer-2 ETH to this deposit address is the most common way an Ethereum swap goes wrong, which is why the table above matters.
Why people move from Ethereum to Monero
An Ethereum address is a public profile. Anyone with it can open Etherscan and see every token you hold, each DeFi position, the NFTs you minted and the addresses you paid. If that address has an ENS name or once received a salary or an exchange withdrawal, all of it points back to you. On Monero, transfers do not expose who paid, who was paid or how much, so ETH swapped to XMR stops adding to that profile.
There is no bridge between the two chains. ETH cannot be wrapped into Monero, and Monero has no smart contracts to hold a wrapped asset, so the only route is a swap: ETH goes into one chain and XMR comes out of another. How to move XMR across chains explains the options in more depth.
Common mistakes with ETH to XMR
- Sending USDT, USDC or DAI to the ETH deposit address instead of using that token's own pair.
- Sending ETH from Arbitrum, Optimism or Base when the swap was created for Ethereum mainnet.
- Pressing Max and leaving no ETH for gas, so the amount sent no longer matches the quote.
- Pasting a MetaMask 0x address into the Monero address field.
- Entering an exchange deposit address as the sender address, where a refund may never be credited.
ETH to XMR: questions and answers
What is Ethereum? Ethereum (ETH) is the leading smart contract platform, powering the largest ecosystem of decentralized applications (dApps), DeFi protocols, and NFT marketplaces in crypto.
What is Monero? Monero (XMR) is the leading privacy cryptocurrency and hides the sender, receiver and amount of every transaction by default. Monero price today