USDT BEP20 to USDT ERC20: Move Tether From BNB Smart Chain to Ethereum

To convert USDT BEP20 to ERC20, enter the amount, paste the Ethereum 0x address for the payout and the BNB Smart Chain address you send from, then transfer the BEP20 Tether to the one-time deposit address. No account or ID is needed, and the ERC20 USDT is sent once BNB Smart Chain confirms the deposit, which takes under a minute.

  • Within minutes
  • No account · No KYC
  • Paid to your wallet
  • Fees included in quote
Crypto Exchange
Buy Crypto
USDT (BEP20)
USDT (BEP20)
USDT (ERC20)
USDT (ERC20)


⚠️ Enter the exact wallet you are sending from. Your funds must be sent from this address.

By clicking Confirm exchange, you agree to the Privacy Policy & Terms of Service.

Tether Binance Smart Chain Logo
USDT (BEP20)
Tether (USDT) on BNB Smart Chain
Price:
$0.9985
24h Change:
0.00%
Market Cap:
$174.58B
Volume (24h):
$37.45B
Circulating Supply:
174.84B USDT (BEP20)
Tether Ethereum Chain Logo
USDT (ERC20)
Tether (USDT) on Ethereum
Price:
$0.9985
24h Change:
0.00%
Market Cap:
$174.58B
Volume (24h):
$37.45B
Circulating Supply:
174.84B USDT (ERC20)

Data by CoinGecko

USDT (BEP20) to USDT (ERC20) Exchange Rate

1 USDT (BEP20) = 1.0000 USDT (ERC20)

The 1 Tether (USDT) on BNB Smart Chain to Tether (USDT) on Ethereum reference rate at market prices, before fees. The exact amount, minimum and maximum are shown in the exchange box before you send.

Live market rate

USDT BEP20 to USDT swap at a glance

Everything that is specific to swapping Tether to Tether on GhostSwap.

Tether (USDT BEP20)You send · BEP-20 token on BNB Smart Chain
Tether (USDT)You receive · ERC-20 token on Ethereum

Both are dollar stablecoins, so this swap mainly moves your dollars from BNB Smart Chain to Ethereum. It is a cross-chain swap from BNB Smart Chain to Ethereum, with no bridge and no wrapped tokens.

Swap time
Within minutesdepends on network confirmations
Network fee
Paid in BNBkeep a little BNB too
Account / KYC
NoneNo sign-up, email or ID
Tracking
Live status pageUSDT BEP20 on BscScan · USDT on Etherscan
Your USDT address
Ethereum addressIt starts with 0x followed by 40 hexadecimal characters. Wallets: MetaMask, Rabby or a Ledger.
Reference rate
1 USDT BEP20 ≈ 1.0000 USDT1 USDT ≈ 1.0000 USDT BEP20 · market prices, 22 Nov 2026
  1. Send USDT BEP20Under a minute to confirm on BNB Smart Chain
  2. GhostSwap swaps itAt the floating rate, fees already in the quote
  3. Receive USDTSent to your address; Ethereum confirms in about 2–5 minutes
Facts checked 22 Nov 2026Reverse: USDT to USDT BEP20

USDT BEP20 to USDT Live Price Chart

USDT (BEP20)/USDT (ERC20)

Loading chart...

Reference market prices, updated live

USDTBSC

Convert Tether (USDT) on BNB Smart Chain to Tether (USDT) on Ethereum

USDT (BEP20)USDT (ERC20) at market price
25USDT (BEP20)25.0000USDT (ERC20)
50USDT (BEP20)50.0000USDT (ERC20)
100USDT (BEP20)100.0000USDT (ERC20)
250USDT (BEP20)250.0000USDT (ERC20)
500USDT (BEP20)500.0000USDT (ERC20)
1,000USDT (BEP20)1,000.00USDT (ERC20)
5,000USDT (BEP20)5,000.00USDT (ERC20)
10,000USDT (BEP20)10,000.00USDT (ERC20)

At market prices of $0.998502 per USDT (BEP20) and $0.998502 per USDT (ERC20) (22 Nov 2026), 500 USDT (BEP20) is worth about 500.0000 USDT (ERC20). Your exact amount, after network fees, is shown in the exchange box before you send.

USDT20

Convert Tether (USDT) on Ethereum to Tether (USDT) on BNB Smart Chain

USDT (ERC20)USDT (BEP20) at market price
31USDT (ERC20)31.0000USDT (BEP20)
50USDT (ERC20)50.0000USDT (BEP20)
100USDT (ERC20)100.0000USDT (BEP20)
250USDT (ERC20)250.0000USDT (BEP20)
500USDT (ERC20)500.0000USDT (BEP20)
1,000USDT (ERC20)1,000.00USDT (BEP20)
5,000USDT (ERC20)5,000.00USDT (BEP20)
10,000USDT (ERC20)10,000.00USDT (BEP20)

Going the other way, 500 USDT (ERC20) is worth about 500.0000 USDT (BEP20) at the same prices.

How to Exchange Tether (BEP20) to Tether (ERC20)

Line Vector
Select Crypto Currency

Select USDT BEP20 and USDT

Pick USDT BEP20 in “You send” and USDT in “You get”, then enter the amount. The box shows how much USDT you get and the minimum USDT BEP20 for this pair.

Select Wallet Address
Line Vector

Enter Tether (ERC20) Address

Paste the Ethereum address that should receive the USDT (it starts with 0x followed by 40 hexadecimal characters). Then enter the BNB Smart Chain address you send USDT BEP20 from; a refund, if ever needed, goes there.

Sent Crypto Currency
Line Vector

Send Tether (BEP20)

Send exactly the amount shown from your own BNB Smart Chain wallet to the one-time deposit address. Keep a little BNB in that wallet for the network fee.

Receive Crypto

Receive Tether (ERC20)

Your USDT is paid out once your USDT BEP20 deposit confirms, and Ethereum then confirms it in about 2–5 minutes. Most swaps finish within minutes. The exact time depends on how fast each network confirms your deposit. Follow each step on the status page with your swap ID.

Why you cannot just send BEP20 to an ERC20 address

BNB Smart Chain copied Ethereum's address format, so a BEP20 address and an ERC20 address look exactly alike: 0x and 40 hexadecimal characters. That is the trap. A wallet will happily let you send BEP20 USDT to any 0x address, but the tokens stay on BNB Smart Chain. If the receiver only watches Ethereum, as many exchange deposit addresses do, the Tether never shows up there.

Sending BEP20 to an ERC20 address does not convert anything. The chain is decided by the network you send on, not by the address. To end up with USDT on Ethereum, the BEP20 tokens have to be exchanged for ERC20 tokens, which is what this pair does.

People search for a BEP20 to ERC20 bridge for the same job. A swap gets there without a bridge contract: you send BEP20 USDT and receive standard Ethereum Tether, priced from aggregated liquidity from leading crypto markets.

Paying BNB gas on the deposit

Your deposit is a BEP-20 transfer, and BNB Smart Chain charges it in BNB. Trust Wallet, MetaMask and Rabby show the gas before you confirm; it comes from the BNB balance, not from the Tether. A wallet with USDT but no BNB will fail to send, so top up a little BNB first if needed.

In MetaMask and Rabby, check that the network selector says BNB Smart Chain before you press send. The same account exists on Ethereum, and choosing the wrong network there would try to send ERC20 USDT you may not have.

Enter the sending 0x address as your sender address. Because the format is shared, the form cannot tell which chain an address belongs to, so it is up to you to give the address that really holds the BEP20 tokens. BNB Smart Chain confirms in under a minute, and most swaps finish within minutes after that.

Your own address can receive on both chains

If you use MetaMask, Rabby, Trust Wallet or a Ledger, your 0x address is the same on BNB Smart Chain and on Ethereum. You can paste the very address you are sending from as the payout address. The ERC20 USDT then sits on the Ethereum side of that account.

To see it, switch the wallet view to Ethereum mainnet. Many people think the swap failed because they are still looking at the BNB Smart Chain view, where the balance has gone down and nothing came back. If the token is not listed, add Tether by its Ethereum contract, 0xdAC17F958D2ee523a2206206994597C13D831ec7, or look up your address on Etherscan.

Paying out to an exchange instead? Make sure its deposit page says Ethereum or ERC20 for USDT. An address it lists for BEP20 looks identical and may not be credited for an Ethereum transfer.

BEP20 and ERC20 Tether side by side

USDT BEP20 (you send)USDT ERC20 (you get)
ChainBNB Smart ChainEthereum
Address0x plus 40 hex charactersIdentical format
Gas coinBNBETH
Gas levelUsually lowUsually higher
ConfirmationUnder a minuteAbout 2 to 5 minutes
ExplorerBscScanEtherscan

The address row is why mix-ups happen, and the gas row is why people tend to keep everyday Tether on BNB Smart Chain and move to Ethereum only when an app or a payee needs it. Tether can freeze USDT at a given address on either chain; that is a feature of the token itself. For a wider view of networks, read the stablecoin network fees guide.

After the payout: ETH, not BNB

The payout fee is already in the quote, so you can receive ERC20 USDT on an address that has never held ETH. Moving it afterwards is another matter. Every ERC20 transfer and every app approval on Ethereum is paid in ETH, and your BNB does nothing for you there, even though the address is the same.

So check the Ethereum side of the account for ETH before you plan the next step. If there is none, a small swap on USDT BEP20 to ETH to the same 0x address fixes it in one go.

Also think about why you are moving. If the goal was simply to send Tether to someone, ask whether they accept BEP20 or TRC20 first: both are cheaper to move than ERC20. If they insist on Ethereum, this pair is the direct route.

Refunds and checking both explorers

If a swap cannot be completed, the coins are refunded to the sender address you entered. Here that is a BNB Smart Chain address, so use a wallet you control rather than an exchange withdrawal, which leaves from a shared address.

You can follow the swap from its status page using the swap ID. The deposit hash opens on BscScan, and the payout hash on Etherscan. Since both explorers accept the same address, search the address on each one to see the two sides of the move.

If BscScan shows your deposit as successful and the status page has not changed for a long time, contact support@ghostswap.io with the swap ID and the BscScan hash. Do not send the deposit again in the meantime.

Common mistakes

  • Sending BEP20 USDT straight to an ERC20-only address and expecting it to arrive on Ethereum.
  • Pressing send in MetaMask while the network selector is on Ethereum instead of BNB Smart Chain.
  • Looking for the payout in the BNB Smart Chain view of the wallet instead of switching to Ethereum.
  • Holding only BNB on the shared address and finding no ETH for the next ERC20 transfer.
  • Using an exchange withdrawal as the sender, so a refund would go to an address that is not yours.

USDT BEP20 to USDT: questions and answers

Everything you need to know about exchanging USDT (BEP20) to USDT (ERC20) on GhostSwap.

How do I convert USDT BEP20 to ERC20?
Select USDT BEP20 to send and USDT ERC20 to receive, enter the amount, your Ethereum payout address and your BNB Smart Chain sender address, then send the BEP20 Tether to the deposit address. ERC20 USDT is paid out after the deposit confirms.
Can I send BEP20 USDT to an ERC20 address?
You can, but the tokens stay on BNB Smart Chain. Whoever runs that address only sees them if they also watch BNB Smart Chain, so an ERC20-only deposit address may never credit them.
Is this a BEP20 to ERC20 bridge?
It does the job people use a bridge for, without a bridge contract. You send BEP20 USDT and receive the regular Ethereum Tether, not a wrapped token.
Can I use the same MetaMask address for both sides?
Yes. The same 0x address exists on BNB Smart Chain and Ethereum. Switch the wallet to Ethereum mainnet to see the ERC20 USDT after the payout.
Do I need ETH or BNB for this swap?
You need BNB to send the BEP20 deposit. You do not need ETH to receive, but you will need it later to move the ERC20 USDT.
Is there KYC to swap BEP20 to ERC20?
No. You do not create an account or give a name, email or ID. Two addresses and a deposit are all it takes.
How long does a BEP20 to ERC20 swap take?
BNB Smart Chain confirms the deposit in under a minute, and most swaps finish within minutes after that. The ERC20 payout then needs about 2 to 5 minutes on Ethereum.
Why do I get slightly less than I sent?
That gap covers the service fee and the cost of the Ethereum payout. The box shows the exact ERC20 amount after fees before you send.
How do I swap ERC20 to BEP20 in Trust Wallet?
Use the reverse pair, USDT ERC20 to USDT BEP20, with your Trust Wallet address as the payout. You will need ETH in the wallet to send the ERC20 deposit.
What happens if the swap cannot be completed?
The BEP20 USDT is returned to the BNB Smart Chain sender address you entered. Send support@ghostswap.io the swap ID if anything looks stuck.
How much is 1 USDT BEP20 in USDT?
1 USDT BEP20 is worth about 1.0000 USDT at the market rate, before fees (market prices, 22 Nov 2026). GhostSwap's quote in the exchange box already includes the service fee and the USDT network fee. The rate floats with the market until your USDT BEP20 deposit confirms, so the exchange box shows the exact amount before you send.