USDT ERC20 to USDT BEP20: Move Tether From Ethereum to BNB Smart Chain, No KYC
To convert USDT ERC20 to BEP20, enter the amount, paste the 0x address that should get the Tether on BNB Smart Chain and the Ethereum address you send from, then transfer the ERC20 USDT to the one-time deposit address with ETH for gas. There is no sign-up or ID check, and the BEP20 USDT is sent after Ethereum confirms the deposit, usually within about 2 to 5 minutes.
- Within minutes
- No account · No KYC
- Paid to your wallet
- Fees included in quote
By clicking Confirm exchange, you agree to the Privacy Policy & Terms of Service.
Data by CoinGecko
USDT (ERC20) to USDT (BEP20) Exchange Rate
The 1 Tether (USDT) on Ethereum to Tether (USDT) on BNB Smart Chain reference rate at market prices, before fees.
USDT to USDT BEP20 swap at a glance
Send USDT from MetaMask, Rabby or a Ledger.
It is a cross-chain swap from Ethereum to BNB Smart Chain, with no bridge and no wrapped tokens.
- Send USDTAbout 2–5 minutes to confirm on Ethereum
- GhostSwap swaps itAt the floating rate, fees already in the quote
- Receive USDT BEP20Sent to your address; BNB Smart Chain confirms in under a minute
How much USDT BEP20 do you get for USDT?
GhostSwap quotes at 15 Nov 2026, 22:39 UTC, after the service fee and the cost of sending the USDT BEP20 to your wallet.
The rate floats with the market until your USDT deposit confirms.
Why people move Tether off Ethereum
The usual reason is the cost of moving it later. Every ERC-20 transfer pays gas in ETH, and on a busy day that can be a noticeable slice of a small payment. BEP-20 transfers on BNB Smart Chain pay gas in BNB and usually cost far less, so people who send Tether often, or in small amounts, tend to keep it there.
Other reasons are practical. A payee or app may only accept USDT BEP20, or your everyday wallet may be Trust Wallet set up around BNB Smart Chain. Searches for an ERC20 to BEP20 bridge usually mean this same job.
No bridge contract holds your coins here. You send ERC-20 Tether to a deposit address, and a separate payout of BEP-20 Tether goes to the address you entered. The rate comes from aggregated liquidity from leading crypto markets and floats until your deposit confirms, so you receive a little less than you send once the fees inside the quote are covered.
The last ETH gas you pay for these dollars
The deposit is an ordinary ERC-20 transfer from MetaMask, Rabby or a Ledger, and it needs ETH on the same address to pay gas. A wallet with Tether and no ETH cannot send. Check the gas estimate your wallet shows before you confirm; it rises and falls with demand on Ethereum, and sending when the network is quiet can make a real difference.
If you plan to keep the Tether on BNB Smart Chain from now on, this deposit may be the last time these dollars cost you ETH. That is a good reason to move one larger amount rather than several small ones, since each ERC-20 transfer pays its own gas.
Ethereum confirms the deposit in about 2 to 5 minutes, and most swaps finish within minutes after that. Its progress is visible on Etherscan as soon as your wallet broadcasts it. Put your own Ethereum address in the sender field; an exchange withdrawal address is not yours to receive a refund.
Receiving in Trust Wallet or MetaMask
BNB Smart Chain uses the same 0x format as Ethereum, and the same recovery phrase gives you the same address on both. So the payout address can be the account you already use. What changes is where you look for the balance.
In Trust Wallet, open USDT on BNB Smart Chain (shown with a BEP20 or BNB Smart Chain label) and copy the address from its Receive screen. In MetaMask or Rabby, switch the network to BNB Smart Chain; if USDT does not appear, add it as a token and the balance shows up.
Be careful with exchange addresses. An exchange may give you a 0x address for Ethereum deposits only, and BEP-20 Tether sent there may not be credited. Use an address from a wallet you control, or one the exchange marks for BNB Smart Chain. The payout confirms in under a minute and is visible on BscScan straight away.
A little BNB on the receiving address
Receiving BEP-20 USDT costs you nothing, because the payout's network fee is already in the quote. Moving it later is a different story. Every BEP-20 transfer, approval or app deposit pays gas in BNB, and an address that holds only USDT cannot pay it.
Before you need the dollars, put a small amount of BNB on the same 0x address. One way is a second small swap on USDT ERC20 to BNB, paid to the same address. Another is to send BNB from a wallet that already holds some.
BNB gas is usually small, so a modest balance lasts a long time. Tether can freeze USDT held at a specific address, on BNB Smart Chain as on Ethereum; that control belongs to the token and does not change when it moves between chains.
Each leg of the move, step by step
| Ethereum leg (deposit) | BNB Smart Chain leg (payout) | |
|---|---|---|
| Token | USDT, ERC-20 | USDT, BEP-20 |
| Who pays the gas | You, in ETH | Included in the quote |
| Confirmation | About 2 to 5 minutes | Under a minute |
| Decimals on the explorer | 6 | 18 |
| Gas for later transfers | ETH | BNB |
| Explorer | Etherscan | BscScan |
The decimal row explains a common surprise: raw amounts on BscScan look longer than on Etherscan, but wallets display the balance normally. For a wider comparison of stablecoin networks and their running costs, see stablecoin transfers across networks.
Refunds and checking the right chain
If a swap cannot be completed, the coins are refunded to the sender address you entered. Here that is your Ethereum address, and the refund comes back as ERC-20 USDT.
Most worried messages about this pair turn out to be a wallet on the wrong network. If the status page says the payout was sent, search your 0x address on BscScan, not Etherscan. If the transfer is there, switch your wallet to BNB Smart Chain and the balance will appear.
When Etherscan marks the deposit as a success but the status page has been stuck on one step far longer than usual, write to support@ghostswap.io; give the swap ID and the hash of your ERC-20 transfer. Wait for an answer before sending a second deposit. And never try to skip the swap by sending ERC-20 Tether straight to your own address: it stays on Ethereum, because the two tokens live on separate chains.
Common mistakes
- Sending ERC20 USDT directly to your own 0x address and expecting it to show up on BNB Smart Chain.
- Starting the deposit from an Ethereum wallet that has no ETH for gas.
- Looking for the payout with the wallet still set to Ethereum instead of BNB Smart Chain.
- Using an exchange address that only accepts Ethereum deposits as the BEP20 payout address.
- Leaving the receiving address with USDT and no BNB to pay for the next transfer.
Going the other way? ![]()
Swap USDT BEP20 to USDT
Other ways to get Tether (BEP20) (USDT BEP20)
More USDT swaps
USDT to USDT BEP20 Live Price Chart
USDT (ERC20)/USDT (BEP20)
Reference market prices, updated live
Convert Tether (USDT) on Ethereum to Tether (USDT) on BNB Smart Chain
| USDT (ERC20) | USDT (BEP20) at market price |
|---|---|
| 31USDT (ERC20) | 31.0000USDT (BEP20) |
| 50USDT (ERC20) | 50.0000USDT (BEP20) |
| 100USDT (ERC20) | 100.0000USDT (BEP20) |
| 250USDT (ERC20) | 250.0000USDT (BEP20) |
| 500USDT (ERC20) | 500.0000USDT (BEP20) |
| 1,000USDT (ERC20) | 1,000.00USDT (BEP20) |
| 5,000USDT (ERC20) | 5,000.00USDT (BEP20) |
| 10,000USDT (ERC20) | 10,000.00USDT (BEP20) |
At market prices of $0.999421 per USDT (ERC20) and $0.999421 per USDT (BEP20) (16 Nov 2026), 500 USDT (ERC20) is worth about 500.0000 USDT (BEP20).
Convert Tether (USDT) on BNB Smart Chain to Tether (USDT) on Ethereum
| USDT (BEP20) | USDT (ERC20) at market price |
|---|---|
| 25USDT (BEP20) | 25.0000USDT (ERC20) |
| 50USDT (BEP20) | 50.0000USDT (ERC20) |
| 100USDT (BEP20) | 100.0000USDT (ERC20) |
| 250USDT (BEP20) | 250.0000USDT (ERC20) |
| 500USDT (BEP20) | 500.0000USDT (ERC20) |
| 1,000USDT (BEP20) | 1,000.00USDT (ERC20) |
| 5,000USDT (BEP20) | 5,000.00USDT (ERC20) |
| 10,000USDT (BEP20) | 10,000.00USDT (ERC20) |
Going the other way, 500 USDT (BEP20) is worth about 500.0000 USDT (ERC20) at the same prices.
How to Exchange Tether (ERC20) to Tether (BEP20)
Select USDT and USDT BEP20
Pick USDT in “You send” and USDT BEP20 in “You get”, then enter the amount.
Enter Tether (BEP20) Address
Paste the BNB Smart Chain address that should receive the USDT BEP20. Sending USDT BEP20 to an address on another network can lose the coins. Then enter the Ethereum address you send USDT from; a refund, if ever needed, goes there.
Send Tether (ERC20)
Send exactly the amount shown from your own Ethereum wallet to the one-time deposit address. Keep a little ETH in that wallet for the network fee.
Receive Tether (BEP20)
Your USDT BEP20 arrives on BNB Smart Chain. Follow each step on the status page with your swap ID.