ETH to USDT BEP20: Swap Ethereum to Tether on BNB Smart Chain, No KYC
To swap ETH to USDT BEP20, enter the ETH amount, paste the 0x address that should get Tether on BNB Smart Chain plus the Ethereum address you send from, then send native ETH from Ethereum mainnet to the one-time deposit address. No account, email or ID is involved, and the BEP20 Tether arrives at that 0x address, where you will need a little BNB before you can move it on.
- Within minutes
- No account · No KYC
- Paid to your wallet
- Fees included in quote
By clicking Confirm exchange, you agree to the Privacy Policy & Terms of Service.
Data by CoinGecko
ETH to USDT (BEP20) Exchange Rate
The 1 Ethereum to Tether (USDT) on BNB Smart Chain reference rate at market prices, before fees. The exact amount, minimum and maximum are shown in the exchange box before you send.
ETH to USDT BEP20 swap at a glance
Everything that is specific to swapping Ethereum to Tether on GhostSwap.
Swapping into USDT BEP20 locks in a dollar value without selling on a centralized exchange. It is a cross-chain swap from Ethereum to BNB Smart Chain, with no bridge and no wrapped tokens.
- Send ETHAbout 2–5 minutes to confirm on Ethereum
- GhostSwap swaps itAt the floating rate, fees already in the quote
- Receive USDT BEP20Sent to your address; BNB Smart Chain confirms in under a minute
Going the other way? Swap USDT BEP20 to ETH
Other ways to get Tether (BEP20) (USDT BEP20)
More ETH swaps
ETH to USDT TRC20
ETH to USDT BEP20 Live Price Chart
ETH/USDT (BEP20)
Reference market prices, updated live
Convert Ethereum to Tether (USDT) on BNB Smart Chain
| ETH | USDT (BEP20) at market price |
|---|---|
| 0.01ETH | 23.5691USDT (BEP20) |
| 0.02ETH | 47.1382USDT (BEP20) |
| 0.05ETH | 117.8455USDT (BEP20) |
| 0.1ETH | 235.6911USDT (BEP20) |
| 0.2ETH | 471.3821USDT (BEP20) |
| 0.5ETH | 1,178.46USDT (BEP20) |
| 2.5ETH | 5,892.28USDT (BEP20) |
| 5ETH | 11,784.55USDT (BEP20) |
At market prices of $2,355.85 per ETH and $0.999550 per USDT (BEP20) (5 Nov 2026), 0.2 ETH is worth about 471.3821 USDT (BEP20). Your exact amount, after network fees, is shown in the exchange box before you send.
Convert Tether (USDT) on BNB Smart Chain to Ethereum
| USDT (BEP20) | ETH at market price |
|---|---|
| 25USDT (BEP20) | 0.010607ETH |
| 50USDT (BEP20) | 0.021214ETH |
| 100USDT (BEP20) | 0.042428ETH |
| 250USDT (BEP20) | 0.106071ETH |
| 500USDT (BEP20) | 0.212142ETH |
| 1,000USDT (BEP20) | 0.424284ETH |
| 5,000USDT (BEP20) | 2.1214ETH |
| 10,000USDT (BEP20) | 4.2428ETH |
Going the other way, 500 USDT (BEP20) is worth about 0.212142 ETH at the same prices.
How to Exchange Ethereum to Tether (BEP20)
Select ETH and USDT BEP20
Pick ETH in “You send” and USDT BEP20 in “You get”, then enter the amount. The box shows how much USDT BEP20 you get and the minimum ETH for this pair.
Enter Tether (BEP20) Address
Paste the BNB Smart Chain address that should receive the USDT BEP20 (it starts with 0x followed by 40 hexadecimal characters (the same format as Ethereum)). Then enter the Ethereum address you send ETH from; a refund, if ever needed, goes there.
Send Ethereum
Send exactly the amount shown from your own Ethereum wallet to the one-time deposit address.
Receive Tether (BEP20)
Your USDT BEP20 is paid out once your ETH deposit confirms, and BNB Smart Chain then confirms it in under a minute. Most swaps finish within minutes. The exact time depends on how fast each network confirms your deposit. Follow each step on the status page with your swap ID.
One 0x address, two different chains
This pair confuses people for a simple reason: the address you send from and the address you receive at can look identical. Ethereum and BNB Smart Chain both use 0x followed by 40 hex characters, and a MetaMask or Rabby account has the same 0x string on every EVM chain. So pasting your usual MetaMask address as the payout is fine. The Tether will land there, but on BNB Smart Chain, not on Ethereum.
That is where the panic starts. Someone opens the wallet on the Ethereum network, sees no USDT, and assumes the swap failed. Switch the network picker to BNB Smart Chain and the balance appears. If the chain is missing in your wallet, add it first, then look again.
Hardware wallets behave the same way. A Ledger address used through MetaMask receives BEP20 tokens without any change, as long as you view it on the right chain. Trust Wallet shows both chains side by side, which makes the split easier to see.
The deposit must be ETH on Ethereum itself
The deposit side of this pair is native ETH on Ethereum mainnet, the coin that pays gas on that chain. It confirms in about 2 to 5 minutes and can be followed on Etherscan with your transaction hash.
Not every token called ETH is that coin. BNB Smart Chain carries a bridged ETH token, and layer-2 networks such as Arbitrum or Base have their own ETH balances. They all sit at 0x addresses, so a wallet will happily let you send them to the deposit address. None of them is what this pair expects, and a deposit on the wrong chain cannot be picked up by the swap.
Before you press Send, check two things in the wallet: the network reads Ethereum (or Ethereum Mainnet), and the asset is ETH, not a token contract. Also leave some ETH behind for the network fee, because Ethereum charges gas on top of the amount you send.
BEP20, ERC20 or TRC20 Tether from ETH
| USDT BEP20 (this pair) | USDT ERC20 | USDT TRC20 | |
|---|---|---|---|
| Network | BNB Smart Chain | Ethereum | Tron |
| Payout address | 0x plus 40 hex | 0x plus 40 hex | T, 34 characters |
| Gas coin to move it later | BNB | ETH | TRX |
| Typical confirmation | Under a minute | About 2 to 5 minutes | About a minute |
| Explorer | BscScan | Etherscan | Tronscan |
All three come from the same ETH deposit. The choice is about where the Tether will be spent next. ERC20 keeps it on Ethereum, where gas is usually higher than on BNB Smart Chain. TRC20 needs a different address type altogether. BEP20 suits wallets, apps and payment requests that already live on BNB Smart Chain. If you want Ethereum Tether instead, open ETH to USDT ERC20; for Tron, use ETH to USDT TRC20.
Plan for BNB before the Tether arrives
USDT BEP20 is a token. Every transfer of it on BNB Smart Chain costs gas, and that gas is paid in BNB, never in USDT and never in ETH. A fresh 0x address that only holds the new Tether can receive it, but it cannot send it anywhere.
Your leftover ETH does not help here. It lives on Ethereum and pays fees only there, even though the address is the same string. People often discover this the first time they try to forward the Tether.
Two simple fixes exist. If you already hold BNB on that address, nothing else is needed. If not, a small separate swap to BNB on BNB Smart Chain sorts it out: ETH to BNB pays to the same 0x address. Do it before you need to move the Tether, not in a rush afterwards. Once BNB sits next to the USDT, Trust Wallet, MetaMask or Rabby can send it on.
Rate, fees and what the box shows
Searches for an ETH to USDT calculator usually want one number: how many dollars of Tether a given amount of ETH turns into. The exchange box answers that directly. It quotes off aggregated liquidity from leading crypto markets and shows the USDT BEP20 amount after fees, before you send anything.
The rate is floating. It follows the ETH price until your deposit confirms on Ethereum, so the final figure can move a little either way from the first quote if ETH moves during those minutes. The reference rate shown near the box is a market figure before fees, useful for a quick check of what 1 ETH is worth in USDT.
The Ethereum gas for your deposit is separate. Your wallet adds it when you send, and it depends on how busy Ethereum is at that moment. The minimum and maximum for this pair are also shown in the box.
Refunds, tracking and support
Each swap has a status page that moves through deposit, exchange and payout. The deposit hash opens on Etherscan, and the payout hash opens on BscScan, which is where the BEP20 transfer is recorded.
If a swap cannot be completed, the coins are refunded to the sender address you entered. Here that is an Ethereum address, so the ETH comes back on Ethereum. Use an address whose keys you hold. A withdrawal from an exchange account goes out from a shared wallet, and ETH returned to that shared wallet may never reach your balance.
When Etherscan shows the deposit confirmed and the status page has not moved for a long time, write to support@ghostswap.io with the swap ID and the deposit hash. Do not send the ETH a second time while you wait. Most swaps finish within minutes once the deposit confirms, so a long pause is worth a message.
Common mistakes
- Looking for the BEP20 Tether on the Ethereum network in MetaMask and assuming the swap failed.
- Sending bridged ETH from BNB Smart Chain or a layer-2 instead of native ETH on Ethereum mainnet.
- Receiving USDT BEP20 at a fresh 0x address with no BNB, then finding it cannot be moved.
- Choosing USDT BEP20 when the app or person you pay expects ERC20 or TRC20 Tether.
- Sending all the ETH in the wallet and leaving nothing to cover the Ethereum gas for the deposit.
ETH to USDT BEP20: questions and answers
Everything you need to know about exchanging ETH to USDT (BEP20) on GhostSwap.