KAS to USDT ERC20: Turn Kaspa into Tether on Ethereum
To swap KAS to USDT ERC20, enter the KAS amount, paste your Ethereum address for the Tether and your full kaspa: address as the sender, then send KAS from your own wallet to the one-time deposit address. Kaspa confirms the deposit in a few minutes, and the payout is ERC-20 USDT on Ethereum with no account or ID needed.
- Within minutes
- No account · No KYC
- Paid to your wallet
- Fees included in quote
By clicking Confirm exchange, you agree to the Privacy Policy & Terms of Service.
Data by CoinGecko
KAS to USDT (ERC20) Exchange Rate
The 1 Kaspa to Tether (USDT) on Ethereum reference rate at market prices, before fees. The exact amount, minimum and maximum are shown in the exchange box before you send.
KAS to USDT swap at a glance
Everything that is specific to swapping Kaspa to Tether on GhostSwap.
Swapping into USDT locks in a dollar value without selling on a centralized exchange. It is a cross-chain swap from Kaspa to Ethereum, with no bridge and no wrapped tokens.
- Send KASA few minutes to confirm on Kaspa
- GhostSwap swaps itAt the floating rate, fees already in the quote
- Receive USDTSent to your address; Ethereum confirms in about 2–5 minutes
All Kaspa swaps: Kaspa exchange
How much USDT do you get for KAS?
GhostSwap quotes at 15 Nov 2026, 22:40 UTC. What lands in your wallet: service fee and USDT network fee already deducted.
The rate floats with the market until your KAS deposit confirms. The minimum for this pair is about 1,500 KAS. Enter any amount in the exchange box above for a live quote; no account needed.
Sending KAS: confirmations and the sender address
Kaspa is a proof-of-work network whose blocks form a DAG, so several blocks can be added side by side. A deposit still has to collect a set number of confirmations before the swap counts it, and on Kaspa that usually takes a few minutes. You can watch it on Kaspa Explorer under the transaction ID that Kaspium or KasWare shows after you send.
The sender field wants your Kaspa address exactly as the wallet prints it, kaspa: prefix included. The prefix is part of the address, not a label, and a refund can only go back to a complete address. Copy it from the receive page of your wallet rather than typing it.
The Kaspa network fee for the deposit is paid in KAS and taken by your wallet on top of the amount. Leave a little KAS behind so the send can cover it. Send the amount the box asks for in a single transaction.
Mining payouts and exchange balances
Many KAS holders are miners, and pool payouts arrive as lots of small amounts. Kaspa keeps coins in separate outputs, the way Bitcoin does, so a wallet full of pool payouts may need to combine many of them into one send. Kaspium and KasWare handle that for you; the fee is simply a bit larger than for a single input.
What you should not do is have a pool, or an exchange, pay KAS straight to the deposit address. Those payments come from the pool's or the exchange's own wallet. The address that sent the coins would not be yours, and the refund route breaks.
Collect the KAS in your own wallet first, then make one send from there to the deposit address. It costs one extra Kaspa transaction and a few minutes, and it means the sender address on the swap is one you can use again later.
Receiving Tether on Ethereum
The payout is USDT as an ERC-20 token on Ethereum. Paste an Ethereum address, 0x followed by 40 hexadecimal characters, from MetaMask, Rabby or a Ledger. If the USDT is going to an exchange account, use that account's ERC-20 USDT deposit address and confirm it is set to the Ethereum network. The payout settles on Ethereum in about 2 to 5 minutes.
Tokens on Ethereum pay their fees in ETH. Your USDT will arrive at an address with no ETH, but it cannot leave that address until some ETH sits there for gas. Plan for that if this is a new wallet, for example with a small KAS to ETH swap to the same address.
Keep in mind that USDT is a centrally issued token. Tether can freeze it at an address; that is how the token is built on every network it runs on.
ERC20, TRC20 or BEP20: which Tether suits your KAS
| USDT ERC20 (this pair) | USDT TRC20 | USDT BEP20 | |
|---|---|---|---|
| Chain | Ethereum | Tron | BNB Smart Chain |
| Address | 0x plus 40 hex characters | Starts with T, 34 characters | 0x plus 40 hex characters |
| Gas coin | ETH | TRX | BNB |
| Payout confirms in | About 2 to 5 minutes | About a minute | Under a minute |
| Common wallets | MetaMask, Rabby, Ledger | TronLink, Trust Wallet | Trust Wallet, MetaMask, Rabby |
Pick ERC-20 when the Tether is going into Ethereum apps or to someone who asked for it on Ethereum. For frequent small transfers, Ethereum gas is usually higher than on the other two. In that case KAS to USDT TRC20 or KAS to USDT BEP20 may fit better. Each one is a separate coin, and the network you choose here is the one the USDT stays on.
Quote and timing for KAS to USDT
KAS is priced in cents, so the amounts on this pair are in the hundreds or thousands of coins. The exchange box gives the exact USDT after fees for the KAS you enter, quoted off aggregated liquidity from leading crypto markets, and shows the minimum and maximum. The reference rate nearby is the market price of 1 KAS in USDT before fees.
The rate floats with the market until the Kaspa deposit has its confirmations. A few minutes of price movement on KAS can shift the result a little, which is normal for a floating quote. Once the deposit confirms, most swaps finish within minutes, and the Ethereum payout follows in about 2 to 5 minutes.
No account, email or ID is part of any step. GhostSwap is a no-KYC crypto exchange: an Ethereum address, a Kaspa sender address and the deposit are all it takes.
If the swap stalls or cannot complete
If a swap cannot be completed, the coins are refunded to the sender address you entered. On this pair the refund is KAS, paid to the kaspa: address in the sender field. That is the reason it has to be your own wallet and has to include the prefix.
Your status page sits under the swap ID. Kaspa Explorer shows the deposit and Etherscan shows the USDT payout once it is sent. If the deposit has its confirmations and the status page has not moved for a long while, email support@ghostswap.io with the swap ID and the Kaspa transaction ID. Do not send the KAS again while you wait for an answer.
To turn the Tether back into Kaspa later, the reverse page is USDT ERC20 to KAS.
Common mistakes
- Typing the Kaspa sender address without the kaspa: prefix.
- Having a mining pool or exchange pay KAS straight to the deposit address.
- Pasting a Tron T address when this pair pays USDT on Ethereum.
- Receiving ERC-20 USDT into a new wallet with no ETH to move it later.
- Sending the KAS in several pieces instead of one transaction.
Going the other way? ![]()
Swap USDT to KAS
Other ways to get Tether (ERC20) (USDT)
KAS to USDT Live Price Chart
KAS/USDT (ERC20)
Reference market prices, updated live
Convert Kaspa to Tether (USDT) on Ethereum
| KAS | USDT (ERC20) at market price |
|---|---|
| 1,500KAS | 41.1771USDT (ERC20) |
| 2,500KAS | 68.6286USDT (ERC20) |
| 5,000KAS | 137.2572USDT (ERC20) |
| 10,000KAS | 274.5143USDT (ERC20) |
| 25,000KAS | 686.2858USDT (ERC20) |
| 50,000KAS | 1,372.57USDT (ERC20) |
| 250,000KAS | 6,862.86USDT (ERC20) |
| 500,000KAS | 13,725.72USDT (ERC20) |
At market prices of $0.027441 per KAS and $0.999604 per USDT (ERC20) (15 Nov 2026), 25,000 KAS is worth about 686.2858 USDT (ERC20). Your exact amount, after network fees, is shown in the exchange box before you send.
Convert Tether (USDT) on Ethereum to Kaspa
| USDT (ERC20) | KAS at market price |
|---|---|
| 25USDT (ERC20) | 910.6993KAS |
| 50USDT (ERC20) | 1,821.40KAS |
| 100USDT (ERC20) | 3,642.80KAS |
| 250USDT (ERC20) | 9,106.99KAS |
| 500USDT (ERC20) | 18,213.99KAS |
| 1,000USDT (ERC20) | 36,427.97KAS |
| 5,000USDT (ERC20) | 182,139.87KAS |
| 10,000USDT (ERC20) | 364,279.74KAS |
Going the other way, 500 USDT (ERC20) is worth about 18,213.99 KAS at the same prices.
How to Exchange Kaspa to Tether (ERC20)
Select KAS and USDT
Pick KAS in “You send” and USDT in “You get”, then enter the amount. The box shows how much USDT you get and the minimum KAS for this pair.
Enter Tether (ERC20) Address
Paste the Ethereum address that should receive the USDT (it starts with 0x followed by 40 hexadecimal characters). Then enter the Kaspa address you send KAS from; a refund, if ever needed, goes there.
Send Kaspa
Send exactly the amount shown from your own Kaspa wallet to the one-time deposit address.
Receive Tether (ERC20)
Your USDT is paid out once your KAS deposit confirms, and Ethereum then confirms it in about 2–5 minutes. Most swaps finish within minutes. The exact time depends on how fast each network confirms your deposit. Follow each step on the status page with your swap ID.
KAS to USDT: questions and answers
Everything you need to know about exchanging KAS to USDT (ERC20) on GhostSwap.