USDT ERC20 to KAS: Convert Tether on Ethereum into Native Kaspa
To swap USDT to KAS, enter the USDT amount, paste the kaspa: address that should receive the coins and the Ethereum address you send from, then send ERC-20 USDT on Ethereum mainnet to the one-time deposit address. Keep a little ETH in that wallet for gas, and the KAS arrives on the Kaspa network with no account or ID asked for.
- Within minutes
- No account · No KYC
- Paid to your wallet
- Fees included in quote
By clicking Confirm exchange, you agree to the Privacy Policy & Terms of Service.
Data by CoinGecko
USDT (ERC20) to KAS Exchange Rate
The 1 Tether (USDT) on Ethereum to Kaspa reference rate at market prices, before fees. The exact amount, minimum and maximum are shown in the exchange box before you send.
USDT to KAS swap at a glance
Everything that is specific to swapping Tether to Kaspa on GhostSwap.
It turns a dollar balance into Kaspa in one step. It is a cross-chain swap from Ethereum to Kaspa, with no bridge and no wrapped tokens.
- Send USDTAbout 2–5 minutes to confirm on Ethereum
- GhostSwap swaps itAt the floating rate, fees already in the quote
- Receive KASSent to your address; Kaspa confirms in a few minutes
All Kaspa swaps: Kaspa exchange
Going the other way? ![]()
Swap KAS to USDT
More USDT swaps
USDT to KAS Live Price Chart
USDT (ERC20)/KAS
Reference market prices, updated live
Convert Tether (USDT) on Ethereum to Kaspa
| USDT (ERC20) | KAS at market price |
|---|---|
| 25USDT (ERC20) | 923.9812KAS |
| 50USDT (ERC20) | 1,847.96KAS |
| 100USDT (ERC20) | 3,695.92KAS |
| 250USDT (ERC20) | 9,239.81KAS |
| 500USDT (ERC20) | 18,479.62KAS |
| 1,000USDT (ERC20) | 36,959.25KAS |
| 5,000USDT (ERC20) | 184,796.24KAS |
| 10,000USDT (ERC20) | 369,592.48KAS |
At market prices of $0.999187 per USDT (ERC20) and $0.027035 per KAS (18 Nov 2026), 500 USDT (ERC20) is worth about 18,479.62 KAS. Your exact amount, after network fees, is shown in the exchange box before you send.
Convert Kaspa to Tether (USDT) on Ethereum
| KAS | USDT (ERC20) at market price |
|---|---|
| 1,500KAS | 40.5852USDT (ERC20) |
| 2,500KAS | 67.6421USDT (ERC20) |
| 5,000KAS | 135.2841USDT (ERC20) |
| 10,000KAS | 270.5683USDT (ERC20) |
| 25,000KAS | 676.4207USDT (ERC20) |
| 50,000KAS | 1,352.84USDT (ERC20) |
| 250,000KAS | 6,764.21USDT (ERC20) |
| 500,000KAS | 13,528.41USDT (ERC20) |
Going the other way, 25,000 KAS is worth about 676.4207 USDT (ERC20) at the same prices.
How to Exchange Tether (ERC20) to Kaspa
Select USDT and KAS
Pick USDT in “You send” and KAS in “You get”, then enter the amount. The box shows how much KAS you get and the minimum USDT for this pair.
Enter Kaspa Address
Paste the Kaspa address that should receive the KAS (it starts with kaspa:). Add a Public key only if that address belongs to an exchange account. Then enter the Ethereum address you send USDT from; a refund, if ever needed, goes there.
Send Tether (ERC20)
Send exactly the amount shown from your own Ethereum wallet to the one-time deposit address. Keep a little ETH in that wallet for the network fee.
Receive Kaspa
Your KAS is paid out once your USDT deposit confirms, and Kaspa then confirms it in a few minutes. Most swaps finish within minutes. The exact time depends on how fast each network confirms your deposit. Follow each step on the status page with your swap ID.
A token deposit, so ETH pays the gas
USDT on this pair is an ERC-20 token on Ethereum. Sending it is a token transfer, and Ethereum charges gas for that in ETH, never in USDT. A wallet holding only Tether cannot send it: MetaMask and Rabby will show an error or refuse to sign until there is ETH for the fee.
So check two balances before you start, the USDT you want to swap and a small ETH balance at the same address. The USDT amount you send should match the one shown in the exchange box; the gas comes out of the ETH on top of it.
Ethereum gas moves with demand, and a token transfer costs more gas than a plain ETH send. If the fee looks high, waiting for a quieter time often helps; the guide to lower gas fees explains how. Ethereum then confirms the deposit in about 2 to 5 minutes, and you can follow it on Etherscan.
Tether on other networks has its own pair
Tether exists on many chains, and several of them use the same 0x address format as Ethereum: BNB Smart Chain, Polygon, Avalanche C-Chain and the Ethereum layer-2 networks. A wallet can hold USDT on any of these at one address. Only ERC-20 USDT on Ethereum mainnet counts as a deposit here.
Look at the network name in your wallet before you send. If it says anything other than Ethereum or Ethereum Mainnet, use the matching pair instead. USDT on Tron goes through USDT TRC20 to KAS, USDT on BNB Smart Chain through USDT BEP20 to KAS, and USDT on Solana through USDT SOL to KAS.
Each of those pairs has its own deposit address and its own gas coin. Picking the one that matches where your Tether already sits avoids a bridge, an extra fee and the risk of a deposit on the wrong chain.
Getting a Kaspa wallet ready
KAS arrives on Kaspa's own network, so it needs a Kaspa wallet. MetaMask and Rabby cannot show it. Kaspium is a mobile app, and KasWare is a browser extension; both create an address that starts with kaspa: followed by lowercase letters and digits.
Set the wallet up and write down its recovery phrase before you swap. Then copy the address from its receive page and paste the whole string, prefix and all, into the payout field. Compare the opening and closing characters with what the wallet displays. A wallet made a minute ago is a perfectly good destination; it starts at zero and fills when the payout lands.
Unlike the USDT side, the KAS needs no second coin. Kaspa fees are paid in KAS, so the payout can move again on its own. Kaspa confirms it in a few minutes, and Kaspa Explorer shows the incoming transaction at your address.
Why swap a dollar balance into KAS
Most people on this pair hold USDT and want exposure to Kaspa, or need KAS to pay someone who takes it. Some are miners going the other way round: they turned KAS into Tether earlier and now move back. Whatever the reason, the swap is one step, from Tether on Ethereum to native KAS, with no bridge or wrapped token involved.
It also changes the kind of asset you hold. USDT is issued by Tether, which can freeze the token at an address, and its value follows the dollar. KAS is a proof-of-work coin with a floating price. That trade-off is the point of the swap, so be sure it is the one you want before you send.
At no stage does the swap ask who you are.
Rate and timing for USDT to KAS
One USDT is worth many KAS, so the payout figure is large and moves with the KAS price. Type a USDT figure and the exchange box returns the KAS after fees, priced from aggregated liquidity from leading crypto markets, with this pair's minimum and maximum underneath. A separate reference line gives 1 USDT in KAS at market, fees not included.
Until Ethereum confirms the deposit, the rate keeps tracking the market. From that point most swaps finish within minutes, plus a few minutes for Kaspa to confirm the coins.
Searching for "convert USDT to KAS" or "exchange USDT to KAS" leads to this same flow. There is no separate converter: the box is the converter, and its figure is what reaches your kaspa: address.
Refund address and help
If a swap cannot be completed, the coins are refunded to the sender address you entered. Here that is USDT on Ethereum, so the sender address must be a 0x address you control in MetaMask, Rabby or a Ledger.
Skip the shortcut of paying the deposit directly out of an exchange account. That Tether leaves from the exchange's pooled hot wallet, so any refund lands with the exchange, not with you. Move the USDT to a wallet you hold the keys for, top up ETH, then send.
Each swap has a status page under its swap ID. Should the deposit be final on Etherscan while the status stays unchanged for a long stretch, contact support@ghostswap.io and include the swap ID plus the Ethereum transaction hash. Hold off on any second deposit while it is checked. To swap back later, use KAS to USDT ERC20.
Common mistakes
- Trying to send USDT from a wallet with no ETH for gas.
- Sending USDT on BNB Smart Chain, Polygon or a layer-2 to this Ethereum mainnet pair.
- Pasting a 0x address into the payout field instead of a kaspa: address.
- Leaving off the kaspa: prefix when copying the payout address.
- Sending the deposit straight from an exchange withdrawal.
USDT to KAS: questions and answers
Everything you need to know about exchanging USDT (ERC20) to KAS on GhostSwap.