USDT ERC20 to ETH: Swap Tether for Ether on Ethereum, No KYC
Holding USDT on Tron? Use USDT (TRC20) to ETH.
To swap USDT ERC20 to ETH, enter the USDT amount, paste the Ethereum address that should get the Ether plus the 0x address you send from, then send the Tether on Ethereum mainnet to the one-time deposit address. Your wallet pays a little ETH as gas for that transfer, and the payout is native ETH on mainnet with no account or ID involved.
- Within minutes
- No account · No KYC
- Paid to your wallet
- Fees included in quote
By clicking Confirm exchange, you agree to the Privacy Policy & Terms of Service.
Data by CoinGecko
USDT (ERC20) to ETH Exchange Rate
The 1 Tether (USDT) on Ethereum to Ethereum reference rate at market prices, before fees. The exact amount, minimum and maximum are shown in the exchange box before you send.
USDT to ETH swap at a glance
Everything that is specific to swapping Tether to Ethereum on GhostSwap.
It turns a dollar balance into Ethereum in one step. Both coins live on Ethereum, so you only need a little ETH to pay the deposit fee.
- Send USDTAbout 2–5 minutes to confirm on Ethereum
- GhostSwap swaps itAt the floating rate, fees already in the quote
- Receive ETHSent to your address; Ethereum confirms in about 2–5 minutes
How much ETH do you get for USDT?
GhostSwap quotes at 17 Nov 2026, 17:00 UTC. What lands in your wallet: service fee and ETH network fee already deducted.
The rate floats with the market until your USDT deposit confirms. The minimum for this pair is about 31 USDT. Enter any amount in the exchange box above for a live quote; no account needed.
The gas catch: sending USDT already costs ETH
This pair has a quirk that trips up first-timers. Tether on Ethereum is a token contract, so moving it is a contract call, and every contract call is paid in ETH. A wallet that holds only USDT cannot send the deposit at all; MetaMask or Rabby will show an insufficient-funds warning for gas even though the USDT balance looks fine.
Token transfers also use more gas than a plain Ether transfer, so the fee for this deposit is noticeably higher than moving ETH itself. Check the gas estimate in the wallet before you confirm, and leave a small ETH cushion rather than an exact amount.
If you have no ETH at all, there are two clean ways round it. Ask someone to send a small amount of ETH to your address first, or use USDT on another network: USDT TRC20 to ETH pays deposit fees in TRX, and USDT BEP20 to ETH pays them in BNB. Either way the result is native Ether on Ethereum.
Mainnet Ether, not Base, Arbitrum or WETH
Searches for this swap often mention Base, and that is worth clearing up. The payout here is native ETH on Ethereum mainnet. It is not ETH on Base, Arbitrum or Optimism, and it is not wrapped ETH (WETH), the token version some apps use. Your 0x address is the same on all of those networks, so the Ether can look missing if the wallet is set to a layer-2.
After the swap, set MetaMask or Rabby to Ethereum Mainnet and the balance shows there. If you want the funds on a layer-2 later, move them yourself from mainnet; the layer-2 explainer covers what changes once you do.
The same applies to the deposit side. For this pair, only Tether on Ethereum mainnet is picked up. USDT held on Arbitrum or Base sits at the same address but on a different chain, and the deposit address cannot see it.
Three Tether networks, one Ether payout
| Deposit chain | Gas for the deposit | Pair | |
|---|---|---|---|
| USDT ERC20 | Ethereum | ETH | This page |
| USDT TRC20 | Tron | TRX | USDT TRC20 to ETH |
| USDT BEP20 | BNB Smart Chain | BNB | USDT BEP20 to ETH |
| USDT SOL | Solana | SOL | USDT SOL to ETH |
All four rows end in the same place: Ether at your Ethereum address. What differs is the chain the Tether leaves from and the coin that pays for sending it. Pick the row that matches where your USDT actually sits, because Tether on one network cannot be deposited into a pair for another. If your USDT is ERC20 and you already hold some ETH, this page is the direct route, with no extra hop. If it is ERC20 and you hold no ETH, sorting out gas first is simpler than moving the Tether to another chain.
Fees, the quote and the cheapest route
People often look for a way to turn USDT into ETH with no fees. No such route exists on any service, because the Ethereum network charges gas for the token transfer regardless of who receives it. What you can control is how much of it you see up front.
The exchange box quotes the ETH you receive with the service fee and the cost of sending the Ether already taken out, using aggregated liquidity from leading crypto markets. The rate floats with the market until the USDT deposit confirms, and the box also shows this pair's minimum and maximum. The only cost outside the quote is the gas your own wallet pays to send the USDT.
To keep that gas low, send when Ethereum is quiet, often weekends and late evenings in Europe and the US. The gas fee guide shows how to check before you confirm. Splitting a large amount into many small swaps usually costs more, because each deposit pays its own gas.
Why move from Tether into Ether
The most common reason is practical: ETH is the fuel for everything on Ethereum. Someone holding only stablecoins cannot approve a token, pay a contract or even move their USDT later without it. Turning part of a USDT balance into ETH solves that in one deposit.
Others want market exposure. USDT tracks the US dollar, while ETH moves with the market, so this swap is how a stablecoin holder steps back into Ethereum after waiting on the sidelines. Both coins share one address, so nothing changes in your wallet setup.
There is also a token-level difference worth knowing. Tether can freeze USDT at any address, a property of the token that its issuer controls. Native Ether has no issuer and no freeze function. That is not a reason on its own to swap, but it is a real difference between the two balances once the ETH is in your wallet.
Refunds and tracking on Etherscan
Enter the 0x address you send the USDT from as the sender address. If a swap cannot be completed, the coins are refunded to the sender address you entered, and on this pair that means USDT on Ethereum. A wallet you control, such as MetaMask, Rabby or a Ledger, is the right choice.
Sending straight from an exchange withdrawal is a poor idea here. The Tether leaves from a pooled exchange address, and a refund to it may never reach your account. Move it to a wallet of your own before you start.
A live status page follows each swap by its swap ID. Both the deposit and the payout appear on Etherscan: look up your sending address to see the USDT transfer and your receiving address to see the Ether arrive. Most swaps finish within minutes once the deposit confirms. If Etherscan shows the deposit confirmed and the status page has not moved for a long time, email support@ghostswap.io with the swap ID and the transaction hash.
Common mistakes
- Holding only USDT and no ETH, so the wallet cannot pay gas to send the deposit.
- Sending USDT from Arbitrum or Base, which shares the 0x address but is not Ethereum mainnet.
- Looking for the Ether on a layer-2 or as WETH instead of on Ethereum Mainnet.
- Picking the ERC20 pair when the Tether actually sits on Tron or BNB Smart Chain.
- Using an exchange withdrawal as the sender, so a refund goes to a pooled address.
Going the other way? ![]()
Swap ETH to USDT ERC20
Other ways to get Ethereum (ETH)
More USDT swaps
USDT to ETH Live Price Chart
USDT (ERC20)/ETH
Reference market prices, updated live
Convert Tether (USDT) on Ethereum to Ethereum
| USDT (ERC20) | ETH at market price |
|---|---|
| 31USDT (ERC20) | 0.017464ETH |
| 50USDT (ERC20) | 0.028168ETH |
| 100USDT (ERC20) | 0.056337ETH |
| 250USDT (ERC20) | 0.140842ETH |
| 500USDT (ERC20) | 0.281684ETH |
| 1,000USDT (ERC20) | 0.563369ETH |
| 5,000USDT (ERC20) | 2.8168ETH |
| 10,000USDT (ERC20) | 5.6337ETH |
At market prices of $0.999264 per USDT (ERC20) and $1,773.73 per ETH (17 Nov 2026), 500 USDT (ERC20) is worth about 0.281684 ETH. Your exact amount, after network fees, is shown in the exchange box before you send.
Convert Ethereum to Tether (USDT) on Ethereum
| ETH | USDT (ERC20) at market price |
|---|---|
| 0.017ETH | 30.1756USDT (ERC20) |
| 0.02ETH | 35.5007USDT (ERC20) |
| 0.05ETH | 88.7518USDT (ERC20) |
| 0.1ETH | 177.5036USDT (ERC20) |
| 0.2ETH | 355.0073USDT (ERC20) |
| 0.5ETH | 887.5182USDT (ERC20) |
| 2.5ETH | 4,437.59USDT (ERC20) |
| 5ETH | 8,875.18USDT (ERC20) |
Going the other way, 0.2 ETH is worth about 355.0073 USDT (ERC20) at the same prices.
How to Exchange Tether (ERC20) to Ethereum
Select USDT and ETH
Pick USDT in “You send” and ETH in “You get”, then enter the amount. The box shows how much ETH you get and the minimum USDT for this pair.
Enter Ethereum Address
Paste the Ethereum address that should receive the ETH (it starts with 0x followed by 40 hexadecimal characters). Then enter the Ethereum address you send USDT from; a refund, if ever needed, goes there.
Send Tether (ERC20)
Send exactly the amount shown from your own Ethereum wallet to the one-time deposit address. Keep a little ETH in that wallet for the network fee.
Receive Ethereum
Your ETH is paid out once your USDT deposit confirms, and Ethereum then confirms it in about 2–5 minutes. Most swaps finish within minutes. The exact time depends on how fast each network confirms your deposit. Follow each step on the status page with your swap ID.
USDT to ETH: questions and answers
Everything you need to know about exchanging USDT (ERC20) to ETH on GhostSwap.