USDT ERC20 to AVAX: Swap Tether on Ethereum to Avalanche, No KYC
To swap USDT ERC20 to AVAX, enter the amount, paste your X-Chain address starting with X-avax1 and the Ethereum address you send from, then send USDT on Ethereum to the one-time deposit address. You need a little ETH for gas but no account and no ID, and the AVAX arrives on Avalanche's X-Chain.
- Within minutes
- No account · No KYC
- Paid to your wallet
- Fees included in quote
By clicking Confirm exchange, you agree to the Privacy Policy & Terms of Service.
Data by CoinGecko
USDT (ERC20) to AVAX Exchange Rate
The 1 Tether (USDT) on Ethereum to Avalanche reference rate at market prices, before fees. The exact amount, minimum and maximum are shown in the exchange box before you send.
USDT to AVAX swap at a glance
Everything that is specific to swapping Tether to Avalanche on GhostSwap.
It turns a dollar balance into Avalanche in one step. It is a cross-chain swap from Ethereum to Avalanche X-Chain, with no bridge and no wrapped tokens.
- Send USDTAbout 2–5 minutes to confirm on Ethereum
- GhostSwap swaps itAt the floating rate, fees already in the quote
- Receive AVAXSent to your address; Avalanche X-Chain confirms in a few seconds
How much AVAX do you get for USDT?
GhostSwap quotes at 16 Nov 2026, 07:48 UTC. What lands in your wallet: service fee and AVAX network fee already deducted.
The rate floats with the market until your USDT deposit confirms. The minimum for this pair is about 31 USDT. Enter any amount in the exchange box above for a live quote; no account needed.
Which USDT do you hold?
Tether runs on several chains, and the exchange box lists each version as its own coin. This page is for USDT on Ethereum, the ERC-20 version kept at a 0x address and moved with ETH for gas. If your Tether is somewhere else, the matching pair saves you a network move.
| Your USDT | Address | Gas coin | Pair to AVAX |
|---|---|---|---|
| Ethereum (ERC20) | 0x | ETH | This page |
| Tron (TRC20) | Starts with T | TRX | USDT TRC20 to AVAX |
| BNB Smart Chain (BEP20) | 0x | BNB | USDT BEP20 to AVAX |
| Polygon PoS | 0x | POL | USDT Polygon to AVAX |
| Solana (SPL) | No 0x prefix | SOL | USDT SOL to AVAX |
| Avalanche C-Chain | 0x | AVAX | USDT AVAX to AVAX |
Four of those networks share the 0x format, so a wallet will let you send BEP20 or Polygon USDT to an Ethereum deposit address without a warning. It will not count toward this swap. Check the network label in MetaMask or Rabby before you confirm.
Gas in ETH for a Tether transfer
An ERC-20 USDT transfer is a call to Tether's token contract on Ethereum, and the sender pays gas in ETH. With no ETH in the wallet the transfer cannot go out, which is the most common reason people get stuck on this pair. Add some ETH before you begin.
Expect the gas estimate for a USDT send to be higher than for a plain ETH send, because a token transfer does more work on-chain. Gas also swings with demand on the network, and sending outside the busiest hours usually costs less. The gas fee guide goes into timing.
Tether, the issuer, can freeze USDT at an address on Ethereum; that is a feature of the token rather than of the swap. Once your transfer is mined, the deposit confirms in about 2 to 5 minutes and appears on Etherscan under the token transfers of your address.
AVAX, or Tether on Avalanche?
Swapping USDT into AVAX trades a dollar-pegged token for a coin whose price moves. That is the point for anyone who wants to hold Avalanche, stake it or pay fees with it. It is the wrong choice if what you really want is to keep dollars and spend them on Avalanche.
For that, USDT ERC20 to USDT AVAX moves Tether from Ethereum to Avalanche's C-Chain as a token at a 0x address. You would still need a little AVAX on the C-Chain to move it later, because every C-Chain transaction pays its fee in AVAX.
Some people do both: the bulk of the balance into USDT on Avalanche, and a smaller part into AVAX for fees. Keep in mind that this page pays AVAX on the X-Chain, so that AVAX has to cross to the C-Chain in Core before it can cover C-Chain fees.
Getting the X-Chain address from Core
Avalanche splits its work across the X-Chain for sending assets, the C-Chain for contracts and the P-Chain for staking. This payout goes to the X-Chain, so the address has to begin with X-avax1. MetaMask cannot give you one; it only shows 0x C-Chain addresses, which the form rejects for this coin.
Core shows all three chains. Open its receive screen, choose the X-Chain and copy the address. If it appears as avax1 with no prefix, add X- at the start. P-avax1 belongs to the staking chain and is rejected as well.
The X-Chain finalizes the payout in a few seconds, and the AVAX then sits in Core's X-Chain balance. A cross-chain transfer in Core moves it to the P-Chain for delegation or to the C-Chain for apps. Look up the arrival on Avascan by searching your X-avax1 address.
Rate and timing for USDT to AVAX
The exchange box shows the AVAX amount after fees for the USDT you type, based on aggregated liquidity from leading crypto markets. USDT stays near one dollar, so nearly all the movement in the quote comes from the AVAX price. The rate floats until the Ethereum deposit confirms.
Most swaps finish within minutes once the deposit confirms, and the X-Chain payout settles in seconds after it is sent. The slow part, if any, is Ethereum: a transaction with a low gas setting can sit in the queue before it is mined. Use the wallet's normal or fast setting rather than a custom low one.
You will find the USDT ERC20 to AVAX minimum and maximum in the box as well. Searches such as AVAX to USDT point the other way; that quote lives on the AVAX to USDT ERC20 page, and the Tron version on AVAX to USDT (TRC20).
Refunds and support
The 0x address you enter as the sender is where a refund goes. If a swap cannot be completed, the coins are refunded to the sender address you entered, as USDT on Ethereum. Use an address from your own MetaMask, Rabby or Ledger.
Avoid funding the deposit straight from an exchange withdrawal. They come from a shared hot wallet, and the exchange may not credit a refund sent back there. Withdraw the USDT to your own wallet first, together with some ETH for gas.
Your swap ID opens a status page that tracks both legs. If Etherscan shows the USDT transfer confirmed and the page has not moved for a long while, email support@ghostswap.io with the swap ID and the transaction hash. A transfer still marked pending on Etherscan is waiting for gas to be accepted on Ethereum, not for the swap.
Common mistakes
- Sending BEP20 or Polygon USDT to the Ethereum deposit address because the 0x format looks the same.
- Starting the swap with no ETH in the wallet to pay gas.
- Pasting a MetaMask 0x address into the AVAX field instead of an X-avax1 address from Core.
- Setting a very low custom gas price, so the deposit waits unmined.
- Choosing AVAX when the goal was to keep Tether, only on Avalanche.
Going the other way? ![]()
Swap AVAX to USDT
Other ways to get Avalanche (AVAX)
More USDT swaps
USDT to AVAX Live Price Chart
USDT (ERC20)/AVAX
Reference market prices, updated live
Convert Tether (USDT) on Ethereum to Avalanche
| USDT (ERC20) | AVAX at market price |
|---|---|
| 31USDT (ERC20) | 4.3147AVAX |
| 50USDT (ERC20) | 6.9592AVAX |
| 100USDT (ERC20) | 13.9184AVAX |
| 250USDT (ERC20) | 34.7961AVAX |
| 500USDT (ERC20) | 69.5921AVAX |
| 1,000USDT (ERC20) | 139.1843AVAX |
| 5,000USDT (ERC20) | 695.9213AVAX |
| 10,000USDT (ERC20) | 1,391.84AVAX |
At market prices of $0.999343 per USDT (ERC20) and $7.1800 per AVAX (16 Nov 2026), 500 USDT (ERC20) is worth about 69.5921 AVAX. Your exact amount, after network fees, is shown in the exchange box before you send.
Convert Avalanche to Tether (USDT) on Ethereum
| AVAX | USDT (ERC20) at market price |
|---|---|
| 4.2AVAX | 30.1758USDT (ERC20) |
| 5AVAX | 35.9236USDT (ERC20) |
| 10AVAX | 71.8472USDT (ERC20) |
| 25AVAX | 179.6180USDT (ERC20) |
| 50AVAX | 359.2360USDT (ERC20) |
| 100AVAX | 718.4720USDT (ERC20) |
| 500AVAX | 3,592.36USDT (ERC20) |
| 1,000AVAX | 7,184.72USDT (ERC20) |
Going the other way, 50 AVAX is worth about 359.2360 USDT (ERC20) at the same prices.
How to Exchange Tether (ERC20) to Avalanche
Select USDT and AVAX
Pick USDT in “You send” and AVAX in “You get”, then enter the amount. The box shows how much AVAX you get and the minimum USDT for this pair.
Enter Avalanche Address
Paste the Avalanche X-Chain address that should receive the AVAX (it starts with X-avax1 (an X-Chain address; 0x C-Chain addresses are not accepted)). Then enter the Ethereum address you send USDT from; a refund, if ever needed, goes there.
Send Tether (ERC20)
Send exactly the amount shown from your own Ethereum wallet to the one-time deposit address. Keep a little ETH in that wallet for the network fee.
Receive Avalanche
Your AVAX is paid out once your USDT deposit confirms, and Avalanche X-Chain then confirms it in a few seconds. Most swaps finish within minutes. The exact time depends on how fast each network confirms your deposit. Follow each step on the status page with your swap ID.
USDT to AVAX: questions and answers
Everything you need to know about exchanging USDT (ERC20) to AVAX on GhostSwap.