USDT ERC20 to SOL: Swap Tether on Ethereum to Solana, No KYC
To swap USDT ERC20 to SOL, enter the USDT amount, paste the Solana address from Phantom or Solflare that should get the SOL and the 0x address you send from, then transfer Tether on Ethereum to the one-time deposit address. You need a little ETH in that wallet for gas but no account, email or ID, and the payout is native SOL that can pay Solana fees right away.
- Within minutes
- No account · No KYC
- Paid to your wallet
- Fees included in quote
By clicking Confirm exchange, you agree to the Privacy Policy & Terms of Service.
Data by CoinGecko
USDT (ERC20) to SOL Exchange Rate
The 1 Tether (USDT) on Ethereum to Solana reference rate at market prices, before fees.
USDT to SOL swap at a glance
Send USDT from MetaMask, Rabby or a Ledger.
It is a cross-chain swap from Ethereum to Solana, with no bridge and no wrapped tokens.
- Send USDTAbout 2–5 minutes to confirm on Ethereum
- GhostSwap swaps itAt the floating rate, fees already in the quote
- Receive SOLSent to your address; Solana confirms in under a minute
How much SOL do you get for USDT?
GhostSwap quotes at 16 Nov 2026, 19:57 UTC, after the service fee and the cost of sending the SOL to your wallet.
The rate floats with the market until your USDT deposit confirms.
First, confirm your USDT is the Ethereum version
Tether runs on several chains at once, and GhostSwap lists each one as its own coin. This page takes only USDT issued as an ERC-20 token on Ethereum mainnet. Before you start, open the wallet that holds it. In MetaMask or Rabby the network name should read Ethereum, and the token should sit at a 0x address on that network.
Three look-alikes catch people out. If your Tether address starts with T, it is on Tron: use USDT TRC20 to SOL instead. If it is on BNB Smart Chain, the address is also 0x and nothing in the wallet warns you, so pick USDT BEP20 to SOL. If it already lives in Phantom as USDT on Solana, the right pair is USDT (Solana) to SOL.
USDT on Arbitrum, Optimism or Base also shares your 0x address but is not mainnet USDT. Move it to Ethereum mainnet first, or the deposit lands on a network the swap does not watch.
ETH pays the gas for your USDT deposit
An ERC-20 token cannot pay for its own transfer. Ethereum charges gas in ETH, so the wallet you send the Tether from needs a small ETH balance beside it. Without one, MetaMask or Rabby will refuse to sign and usually shows a message about insufficient funds for gas, even though the USDT balance is fine.
The deposit is a plain token transfer to the address the box gives you. There is no approval step and no contract to connect to. Gas on Ethereum rises and falls with demand, so a quiet hour can cost noticeably less; the guide to lower gas fees covers timing.
Ethereum usually confirms the transfer in about 2 to 5 minutes. You can follow it on Etherscan by pasting the transaction hash from your wallet. Send the exact USDT amount you entered, and send it once; a second transfer to the same deposit address does not make anything go faster.
Copying the right address out of Phantom or Solflare
A Solana wallet address is 32 to 44 letters and numbers in base58, with no 0x at the front. Phantom keeps Ethereum and Solana accounts in the same app and shows both addresses on its receive page. Choose the Solana one. A 0x address in the payout field is the most common slip on this pair, because it was the last thing copied from MetaMask.
A brand-new wallet is fine as the destination. The first SOL payment creates the account on-chain, and a normal swap amount is far above the small rent-exempt balance Solana keeps in every account.
Do not paste an address you found on Solscan under a token account. Those belong to a specific SPL token inside a wallet, not to the wallet itself, and native SOL should go to the main address. With a Ledger, open Phantom or Solflare with the device connected and copy the address shown there.
USDT ERC20 and SOL side by side
| USDT ERC20 (you send) | SOL (you receive) | |
|---|---|---|
| Network | Ethereum mainnet | Solana |
| Address | 0x plus 40 hex characters | 32 to 44 base58 characters, no 0x |
| Confirmation | About 2 to 5 minutes | Under a minute |
| Fee coin | ETH | SOL |
| Wallets | MetaMask, Rabby, Ledger | Phantom, Solflare, Ledger |
| Explorer | Etherscan | Solscan |
The fee row is the reason many people use this pair. On the Ethereum side you pay gas in a second coin, ETH. On the Solana side the coin you receive is the fee coin, so the SOL can move itself, pay for token swaps in Phantom and cover fees for any SPL tokens you add later. If you also want dollars on Solana, swap part of your Tether with USDT ERC20 to USDT (Solana) and keep this SOL for the fees.
Why people move Tether from Ethereum into SOL
The usual case is a person whose dollars sit on Ethereum while the next thing they want to do is on Solana: a trade on a Solana DEX, a mint, or staking SOL with a validator. Every one of those starts with SOL in the wallet, and this pair gets it there in one step, without a bridge contract and without an exchange account.
Others are simply tired of paying Ethereum gas for small moves. Ethereum gas is usually higher than Solana fees, so a wallet that is used often can be cheaper to run on Solana.
Two honest trade-offs come with it. Once the swap is done you hold SOL, whose value moves with the market, rather than a dollar token. And the token you start with has an issuer: Tether can freeze USDT at a given address on any network it runs on. That is a property of USDT itself, not of this swap.
Quote, timing and refunds for USDT to SOL
Because the deposit is a dollar token, the quote is in effect the SOL price in USDT. It comes from aggregated liquidity from leading crypto markets, and the box shows the SOL you get after fees for the USDT you type. Until that Ethereum transfer confirms, the rate keeps floating. After that, most swaps finish within minutes, and Solana settles the payout in under a minute.
The 0x address you give as the sender is also the refund address. If a swap cannot be completed, the coins are refunded to the sender address you entered, so the USDT goes back to that Ethereum account. Make it a wallet you control. Sending straight from an exchange withdrawal is a poor idea, because the coins leave a shared exchange wallet and a refund there may never reach you.
Note the swap ID the status page gives you. If Etherscan shows the deposit confirmed and the status page has not moved for a long while, write to support@ghostswap.io with the swap ID and the Ethereum transaction hash.
Common mistakes
- Sending USDT on Tron, BNB Smart Chain or a layer-2 network to the Ethereum deposit address of this pair.
- Trying to send the USDT with no ETH in the wallet, so the transfer cannot pay its gas.
- Pasting the Ethereum address from Phantom instead of its Solana address into the payout field.
- Using a token account address from Solscan instead of the wallet address that Phantom or Solflare shows.
- Withdrawing the USDT from an exchange straight to the deposit address, which leaves a refund nowhere to go.
Going the other way? ![]()
Swap SOL to USDT
Other ways to get Solana (SOL)
More USDT swaps
USDT to SOL Live Price Chart
USDT (ERC20)/SOL
Reference market prices, updated live
Convert Tether (USDT) on Ethereum to Solana
| USDT (ERC20) | SOL at market price |
|---|---|
| 31USDT (ERC20) | 0.433972SOL |
| 50USDT (ERC20) | 0.699955SOL |
| 100USDT (ERC20) | 1.3999SOL |
| 250USDT (ERC20) | 3.4998SOL |
| 500USDT (ERC20) | 6.9996SOL |
| 1,000USDT (ERC20) | 13.9991SOL |
| 5,000USDT (ERC20) | 69.9955SOL |
| 10,000USDT (ERC20) | 139.9910SOL |
At market prices of $0.999396 per USDT (ERC20) and $71.3900 per SOL (16 Nov 2026), 500 USDT (ERC20) is worth about 6.9996 SOL.
Convert Solana to Tether (USDT) on Ethereum
| SOL | USDT (ERC20) at market price |
|---|---|
| 0.5SOL | 35.7166USDT (ERC20) |
| 1SOL | 71.4331USDT (ERC20) |
| 5SOL | 357.1657USDT (ERC20) |
| 10SOL | 714.3315USDT (ERC20) |
| 50SOL | 3,571.66USDT (ERC20) |
| 100SOL | 7,143.31USDT (ERC20) |
Going the other way, 10 SOL is worth about 714.3315 USDT (ERC20) at the same prices.
How to Exchange Tether (ERC20) to Solana
Select USDT and SOL
Pick USDT in “You send” and SOL in “You get”, then enter the amount.
Enter Solana Address
Paste the Solana address that should receive the SOL. Then enter the Ethereum address you send USDT from; a refund, if ever needed, goes there.
Send Tether (ERC20)
Send exactly the amount shown from your own Ethereum wallet to the one-time deposit address. Keep a little ETH in that wallet for the network fee.
Receive Solana
Your SOL arrives on Solana. Follow each step on the status page with your swap ID.