XLM to ETH: Swap Stellar Lumens to Native Ethereum, No KYC
To swap XLM to ETH, enter the amount, paste your 0x Ethereum address and the G address you send from, then pay the XLM from your Stellar wallet to the deposit address, adding the Memo only if the deposit screen shows one. You receive native ETH on Ethereum mainnet, with no sign-up and no ID.
- Within minutes
- No account · No KYC
- Paid to your wallet
- Fees included in quote
By clicking Confirm exchange, you agree to the Privacy Policy & Terms of Service.
Data by CoinGecko
XLM to ETH Exchange Rate
The 1 Stellar to Ethereum reference rate at market prices, before fees. The exact amount, minimum and maximum are shown in the exchange box before you send.
XLM to ETH swap at a glance
Everything that is specific to swapping Stellar to Ethereum on GhostSwap.
It is a cross-chain swap from Stellar to Ethereum, with no bridge and no wrapped tokens.
- Send XLMA few seconds to confirm on Stellar
- GhostSwap swaps itAt the floating rate, fees already in the quote
- Receive ETHSent to your address; Ethereum confirms in about 2–5 minutes
How much ETH do you get for XLM?
GhostSwap quotes at 13 Nov 2026, 07:09 UTC. What lands in your wallet: service fee and ETH network fee already deducted.
The rate floats with the market until your XLM deposit confirms. The minimum for this pair is about 210 XLM. Enter any amount in the exchange box above for a live quote; no account needed.
The Stellar side settles in seconds
Stellar closes a ledger every few seconds, so your XLM deposit is final almost as soon as you press send. The network fee for it is a tiny amount of XLM, taken from the same wallet. Lobstr, Freighter and other Stellar wallets add it for you.
One Stellar rule catches people out. Every account must keep a small minimum balance of XLM, called the base reserve, and each trustline or offer the account holds raises it a little. That part of the balance cannot be sent. If you try to swap the full number your wallet shows, the transaction fails, or the wallet trims it to what is spendable.
So enter an amount a little below your total, or use the wallet's own spendable figure. The reserve stays in your Stellar account, ready for later use. You can check every movement on StellarExpert by pasting your G address.
The deposit Memo: copy it when the screen shows one
Stellar payments carry an optional Memo field. For this swap, look at the deposit screen. If it shows a Memo, include it in your XLM payment exactly as written. If the screen has no Memo, send the XLM without one.
In Lobstr the Memo sits just below the amount on the send screen. In Freighter it is under the advanced or optional fields. Copy it with the copy button rather than typing it, since a single wrong digit gives the payment a different Memo from the one shown.
The Ethereum side has no Memo at all. Your ETH payout goes to a plain 0x address and needs nothing extra. That is a useful contrast with the reverse direction, where the Memo matters on the Stellar payout to an exchange account. Here it matters only on the way in, and only if the deposit screen asks for it.
Your 0x address and what arrives in it
The ETH goes to an Ethereum address: 0x followed by 40 hexadecimal characters, copied from MetaMask, Rabby or a Ledger. Your G address and your Stellar secret key have nothing to do with it. A Stellar address pasted into the payout field is rejected because the format does not match.
The payout is on Ethereum mainnet. Ether on Base or Arbitrum shares the same 0x address shape, but those are separate receive coins in the exchange box, so keep your wallet set to Ethereum to see the balance. If you use a Ledger for both coins, the Stellar and Ethereum accounts on it have different addresses. Copy the Ethereum one for the payout and the Stellar one for the refund.
What lands is native ETH, the main balance in the wallet, not a wrapped or bridged token. Because ETH is the gas coin, the new balance can pay for its own transactions straight away. Nothing else has to be topped up before you use it in an Ethereum app.
Why people move from Stellar to Ethereum
Stellar is built for payments. Transfers are cheap and settle in seconds, which is why many people keep XLM for sending value around. Ethereum is where most smart-contract activity happens: lending, token swaps, NFTs and staking. Every one of those actions costs gas in ETH.
So the usual reason for this swap is a wallet that needs Ether to do something on Ethereum. Others are rebalancing from one large-cap coin to another, or moving part of an XLM holding into an asset they want to hold for longer. Both coins move with the market, so the swap changes your exposure rather than locking a value in place.
You cannot send lumens to an Ethereum address directly. The two chains share no address format and no bridge sits between them here. A swap is the step in the middle: XLM goes in on Stellar, ETH comes out on Ethereum, and no account on either side is needed. XLM compared with XRP covers more of what Stellar is good at.
How the quote is formed and how long it takes
The exchange box shows the exact ETH you receive after fees for the XLM you enter. The price comes from aggregated liquidity from leading crypto markets, and the reference rate next to it is 1 XLM in ETH at market prices before fees. Both coins float, so the figure can shift in either direction between quotes.
The rate floats until your XLM deposit confirms, which on Stellar takes a few seconds. That short window is one advantage of sending from a fast chain. Once the deposit is in, most swaps finish within minutes.
The slowest step is the payout. The ETH is sent on Ethereum and takes about 2 to 5 minutes to confirm there, so your wallet may show it a little after the status page marks the swap as sent. The minimum and maximum for this pair are shown in the box; check them before you send, especially for small amounts.
Refunds go back to your Stellar address
The refund address is the G address you send the XLM from. If a swap cannot be completed, the coins are refunded to the sender address you entered. Make it your own Lobstr, Freighter or Ledger account, so the lumens come back somewhere you control.
Paying directly from an exchange withdrawal is a weak choice for this pair. The XLM leaves from a shared exchange account, and a refund to that account is usually credited only with a matching Memo. Move the lumens to your own Stellar wallet first and pay the deposit from it.
The swap ID links to a status page that updates as each step happens. The deposit appears on StellarExpert under your G address, and the payout on Etherscan under your 0x address. If StellarExpert shows the payment and the status page has stopped for a long time, email support@ghostswap.io with the swap ID and the Stellar transaction hash rather than sending again.
Common mistakes
- Trying to send the whole XLM balance and hitting the base reserve, so the payment fails.
- Leaving out the Memo when the deposit screen shows one, or adding one when it shows none.
- Pasting the G address into the payout field instead of a 0x Ethereum address.
- Looking for the ETH on Base or Arbitrum when it was paid on Ethereum mainnet.
- Sending from an exchange account, where a refund without the right Memo may not be credited.
Going the other way? ![]()
Swap ETH to XLM
Other ways to get Ethereum (ETH)
More XLM swaps
XLM to ETH Live Price Chart
XLM/ETH
Reference market prices, updated live
Convert Stellar to Ethereum
| XLM | ETH at market price |
|---|---|
| 250XLM | 0.018889ETH |
| 500XLM | 0.037777ETH |
| 2,500XLM | 0.188886ETH |
| 5,000XLM | 0.377772ETH |
| 50,000XLM | 3.7777ETH |
At market prices of $0.142615 per XLM and $1,887.58 per ETH (14 Nov 2026), 2,500 XLM is worth about 0.188886 ETH. Your exact amount, after network fees, is shown in the exchange box before you send.
Convert Ethereum to Stellar
| ETH | XLM at market price |
|---|---|
| 0.016ETH | 211.7679XLM |
| 0.02ETH | 264.7099XLM |
| 0.05ETH | 661.7747XLM |
| 0.1ETH | 1,323.55XLM |
| 0.2ETH | 2,647.10XLM |
| 0.5ETH | 6,617.75XLM |
| 2.5ETH | 33,088.74XLM |
| 5ETH | 66,177.47XLM |
Going the other way, 0.2 ETH is worth about 2,647.10 XLM at the same prices.
How to Exchange Stellar to Ethereum
Select XLM and ETH
Pick XLM in “You send” and ETH in “You get”, then enter the amount. The box shows how much ETH you get and the minimum XLM for this pair.
Enter Ethereum Address
Paste the Ethereum address that should receive the ETH (it starts with 0x followed by 40 hexadecimal characters). Then enter the Stellar address you send XLM from; a refund, if ever needed, goes there.
Send Stellar
Send exactly the amount shown from your own Stellar wallet to the one-time deposit address.
Receive Ethereum
Your ETH is paid out once your XLM deposit confirms, and Ethereum then confirms it in about 2–5 minutes. Most swaps finish within minutes. The exact time depends on how fast each network confirms your deposit. Follow each step on the status page with your swap ID.
XLM to ETH: questions and answers
Everything you need to know about exchanging XLM to ETH on GhostSwap.