ETH to XLM: Exchange Ethereum for Stellar Lumens, No KYC
To swap ETH to XLM, enter the amount, paste the Stellar G-address that should receive the lumens and the 0x address that will send the ETH, then move it to the one-time deposit address. Add a Memo only if the G-address belongs to an exchange account; a personal wallet such as Lobstr or Freighter does not need one, and no account or ID is asked for.
- Within minutes
- No account · No KYC
- Paid to your wallet
- Fees included in quote
By clicking Confirm exchange, you agree to the Privacy Policy & Terms of Service.
Data by CoinGecko
ETH to XLM Exchange Rate
The 1 Ethereum to Stellar reference rate at market prices, before fees.
ETH to XLM swap at a glance
Send ETH from MetaMask, Rabby or a Ledger.
- Send ETHAbout 2–5 minutes to confirm on Ethereum
- GhostSwap swaps itAt the floating rate, fees already in the quote
- Receive XLMSent to your address; Stellar confirms in a few seconds
How much XLM do you get for ETH?
GhostSwap quotes at 17 Nov 2026, 11:23 UTC, after the service fee and the cost of sending the XLM to your wallet.
The rate floats with the market until your ETH deposit confirms.
Sending ETH: gas and confirmation
Your deposit is a plain ETH transfer from MetaMask, Rabby or a Ledger. The wallet adds the network fee on top, paid in ETH, so leave a little behind rather than trying to send the full balance. A plain transfer like this is cheaper in gas than sending a token.
Expect Ethereum to confirm it within about 2 to 5 minutes; watch it on Etherscan with the hash from your wallet. If gas is spiking, MetaMask lets you speed up a pending transaction, which matters, since the quote keeps tracking the market until confirmation.
Pay from a 0x address you control and type that address in the sender field. With the ETH confirmed, most swaps finish within minutes, and Stellar settles the payout in a few seconds.
Your Stellar address: G, 56 characters
A Stellar public address starts with G and is 56 characters long. Lobstr and Freighter both show it when you tap Receive. Paste the full string; do not use a federation name of the form name*domain, because the payout field needs the actual G-address.
Stellar wallets also hold a secret key, which starts with S and is the same length. It must never be typed into any website. GhostSwap only needs the public G-address that you would hand to anyone paying you.
Many Ethereum users have never held lumens, so the receiving address is often brand new. Set up the wallet and copy its address before you start the swap. Stellar confirms in a few seconds, and you can see the payout on StellarExpert almost as soon as it is sent.
The Memo: when you need it and when you don't
The Memo field on this pair is for exchange and custodial accounts. Those services give every customer the same shared G-address and use the Memo to tell deposits apart. If you are sending the XLM to such an account, copy the Memo from the deposit page exactly as shown. Without it, the lumens arrive at the exchange but are not credited to you.
A personal wallet is different. Your Lobstr or Freighter address belongs to you alone, so leave the Memo empty.
If you are not sure which case you are in, look at where you got the address. A wallet app that shows you a recovery phrase is yours. An exchange page that shows an address and a Memo together is custodial, and both are needed.
Activating a new Stellar account
Stellar does not let an address exist on the ledger until it holds a minimum amount of XLM, called the base reserve. Before that, the G-address is valid but inactive. The first payment that meets the reserve creates the account.
For this swap that is usually not a problem: the XLM payout itself activates the address, as long as it is larger than the reserve. Lobstr shows the current requirement when you set up a wallet.
The reserve stays locked while the account is open, and each trustline or other entry you add raises it a little. When you later send your lumens on, the wallet keeps that part back. That is why a Stellar balance can never be sent out to the last stroop unless you close the account.
Why people swap Ethereum to Stellar
Stellar was built for payments. Transfers settle in seconds and the network fee is a tiny fraction of an XLM, which makes lumens convenient for sending money to people or moving value between wallets. Ethereum is the bigger platform for apps, but every transfer pays gas that depends on network load.
So a common pattern is to keep the long-term position in ETH and move a working balance to XLM for payments. The swap does that directly from your wallet to your G-address, with no sign-up and no ID.
Both chains are public, and each side of the swap can be seen on its explorer. For more on the coin, read XLM vs XRP or the Stellar price prediction. To move back, use XLM to ETH.
Refunds and the status page
If a swap cannot be completed, the ETH is returned to whichever 0x address you typed as the sender. Make it your own address, not an exchange deposit address, where a refund may not be matched to you.
With the swap ID, the status page shows the ETH arriving and confirming, the exchange step, and the XLM being sent. You can check the Ethereum side on Etherscan and the Stellar side on StellarExpert.
Because Stellar settles in seconds, a payout that stays missing is worth checking against the G-address and Memo you entered. If the XLM went to an exchange account and does not appear, first check that the Memo was entered. Etherscan says Success but the status page is unchanged after a long wait? Then send support@ghostswap.io the swap ID along with the ETH transaction hash.
Common mistakes
- Leaving out the Memo when the XLM goes to an exchange account, so the deposit is not credited.
- Entering a federation name or another short alias instead of the full 56-character G-address.
- Typing a Stellar secret key (starting with S) anywhere other than your own wallet.
- Trying to send the whole ETH balance with no room left for gas.
- Planning to move every lumen out later, forgetting the base reserve stays in the account.
Going the other way? ![]()
Swap XLM to ETH
Other ways to get Stellar (XLM)
More ETH swaps
ETH to XLM Live Price Chart
ETH/XLM
Reference market prices, updated live
Convert Ethereum to Stellar
| ETH | XLM at market price |
|---|---|
| 0.017ETH | 221.8876XLM |
| 0.02ETH | 261.0443XLM |
| 0.05ETH | 652.6107XLM |
| 0.1ETH | 1,305.22XLM |
| 0.2ETH | 2,610.44XLM |
| 0.5ETH | 6,526.11XLM |
| 2.5ETH | 32,630.53XLM |
| 5ETH | 65,261.07XLM |
At market prices of $1,789.08 per ETH and $0.137071 per XLM (17 Nov 2026), 0.2 ETH is worth about 2,610.44 XLM.
Convert Stellar to Ethereum
| XLM | ETH at market price |
|---|---|
| 250XLM | 0.019154ETH |
| 500XLM | 0.038308ETH |
| 2,500XLM | 0.191538ETH |
| 5,000XLM | 0.383077ETH |
| 50,000XLM | 3.8308ETH |
Going the other way, 2,500 XLM is worth about 0.191538 ETH at the same prices.
How to Exchange Ethereum to Stellar
Select ETH and XLM
Pick ETH in “You send” and XLM in “You get”, then enter the amount.
Enter Stellar Address
Paste the Stellar address that should receive the XLM. Add a Memo only if that address belongs to an exchange account. Then enter the Ethereum address you send ETH from; a refund, if ever needed, goes there.
Send Ethereum
Send exactly the amount shown from your own Ethereum wallet to the one-time deposit address.
Receive Stellar
Your XLM arrives on Stellar. Follow each step on the status page with your swap ID.