USDT ERC20 to LTC: Swap Tether on Ethereum to Litecoin
To swap USDT ERC20 to LTC, enter the amount, paste a Litecoin address that starts with ltc1, L or M, add the 0x address you send from, then send the USDT on Ethereum to the one-time deposit address. The deposit is an ERC-20 transfer, so your wallet also needs a little ETH for gas, and the Litecoin arrives as a normal LTC payment with no account or ID involved.
- Within minutes
- No account · No KYC
- Paid to your wallet
- Fees included in quote
By clicking Confirm exchange, you agree to the Privacy Policy & Terms of Service.
Data by CoinGecko
USDT (ERC20) to LTC Exchange Rate
The 1 Tether (USDT) on Ethereum to Litecoin reference rate at market prices, before fees.
USDT to LTC swap at a glance
Send USDT from MetaMask, Rabby or a Ledger.
It is a cross-chain swap from Ethereum to Litecoin, with no bridge and no wrapped tokens.
- Send USDTAbout 2–5 minutes to confirm on Ethereum
- GhostSwap swaps itAt the floating rate, fees already in the quote
- Receive LTCSent to your address; Litecoin confirms in about 10 minutes (blocks every 2.5 minutes)
How much LTC do you get for USDT?
GhostSwap quotes at 21 Nov 2026, 13:31 UTC, after the service fee and the cost of sending the LTC to your wallet.
The rate floats with the market until your USDT deposit confirms.
Leaving Ethereum gas behind for Litecoin
Tether on Ethereum is easy to hold and hard to move cheaply. Every transfer of it costs gas in ETH, and on a busy day that fee can feel large next to a modest payment. Litecoin is a separate proof-of-work chain with its own coin, and sending LTC usually costs far less than an ERC-20 transfer.
That is the honest reason most people take this direction. Some want a coin they can send to a merchant or payment processor that takes LTC. Others simply want to stop paying Ethereum gas each time they move money between their own wallets.
There is a trade-off to accept before you start. USDT tracks the US dollar, while Litecoin's price moves with the market. Once the swap completes, the value of your LTC goes up and down like any other coin, so this is a move out of a stable balance, not a sideways step. If you want to stay in dollars and only cut fees, a USDT pair on a cheaper chain may suit you better.
The Ethereum side: ETH for gas on a token deposit
USDT ERC20 is a token contract on Ethereum, not a coin of its own chain. Sending it is a transaction that Ethereum validators process, and they are paid in ETH. A wallet holding only USDT cannot send it, however large the USDT balance is. Keep some ETH next to the Tether in MetaMask, Rabby or your Ledger before you start.
Check the network your wallet is set to. Tether also exists on Arbitrum, Optimism, Base and Polygon at the same 0x address, and a wallet will happily send that version to the deposit address. Only USDT on Ethereum mainnet counts for this pair.
Expect the deposit to take about 2 to 5 minutes on Ethereum. You can watch it on Etherscan by pasting your transaction hash; the token transfer line should show USDT moving to the deposit address. The guide to lower gas fees explains how to pick a calmer moment to send.
Which Litecoin address to paste
Litecoin has three address styles that can receive this payout. Addresses starting with ltc1 are the modern native SegWit format and are what Nexus Wallet, Exodus and the Ledger Litecoin app give by default. Addresses starting with M are script addresses, and those starting with L are the original legacy style. All three work.
One style does not. Addresses that begin with ltcmweb1 belong to MWEB, Litecoin's optional privacy extension, and cannot receive the payout. If your wallet offers both, copy the regular receive address. You can move the coins into MWEB yourself afterwards in a wallet that supports it.
Also watch for an old habit: a 0x address pasted into the receive field because the Ethereum wallet was open. The box will not accept a 0x string as a Litecoin address, but a stray Bitcoin address starting with 3 or bc1 is an easy slip to miss by eye. Copy straight from the Litecoin wallet's receive screen.
USDT networks you can swap into LTC
Tether lives on several chains, and each is a separate coin in the exchange box. The searches for this swap show people holding it on Tron and Solana as well as Ethereum. Pick the pair that matches where your USDT actually sits.
| USDT you hold | Sender address | Deposit fee paid in | Pair |
|---|---|---|---|
| ERC20 (Ethereum) | 0x plus 40 hex characters | ETH | This page |
| TRC20 (Tron) | Starts with T | TRX or energy | USDT TRC20 to LTC |
| Solana (SPL) | Base58, no 0x | SOL | USDT SOL to LTC |
| BEP20 (BNB Chain) | 0x plus 40 hex characters | BNB | USDT BEP20 to LTC |
ERC20 and BEP20 addresses look the same, so the address alone will not tell you which you hold. Your wallet's network label will.
Small amounts and the 1 USDT to LTC quote
Many searches for this pair are for small sums: 5, 10 or 11 USDT into Litecoin. The exchange box answers those directly. Type the USDT amount and it shows the LTC you receive after the service fee and the Litecoin network fee. It also shows the minimum for the pair, so you know before sending whether a small amount qualifies.
Remember the cost that sits outside the box. The Ethereum gas for your deposit comes from your own ETH, and on a small transfer it can take a noticeable share of the value. For a few dollars of Tether, that alone may decide whether the swap is worth doing today.
The rate comes from aggregated liquidity from leading crypto markets and floats until the USDT deposit confirms on Ethereum. After that, most swaps finish within minutes. The reference rate on the page is the market price before fees, useful as a guide but not the amount you get.
After the LTC arrives, and refunds
Your Litecoin wallet shows the payout as soon as it is broadcast, then counts confirmations as blocks arrive about every 2.5 minutes. You can check it on Blockchair. If you plan to forward the LTC to a service, that service sets its own confirmation count.
If a swap cannot be completed, the coins are refunded to the sender address you entered. For this pair that means USDT returns to your 0x address on Ethereum, so it should be a wallet you control, not an exchange withdrawal address. Tether, as the issuer, can freeze USDT at any address; that is a property of the token itself.
Keep your swap ID. If the status page stops moving while Etherscan shows the deposit confirmed, write to support@ghostswap.io with the swap ID and the Ethereum transaction hash, and do not send the USDT a second time.
Common mistakes
- Holding only USDT in the Ethereum wallet, with no ETH to pay gas for the transfer.
- Sending Tether from Arbitrum, Base or Polygon, which shares the 0x address but is not ERC20 on mainnet.
- Pasting an ltcmweb1 MWEB address, which cannot receive the payout.
- Using a Bitcoin address starting with bc1 or 3 instead of a Litecoin one.
- Entering an exchange account as the sender address, so a refund may never be credited to you.
Going the other way? ![]()
Swap LTC to USDT
Other ways to get Litecoin (LTC)
More USDT swaps
USDT to LTC Live Price Chart
USDT (ERC20)/LTC
Reference market prices, updated live
Convert Tether (USDT) on Ethereum to Litecoin
| USDT (ERC20) | LTC at market price |
|---|---|
| 31USDT (ERC20) | 0.783049LTC |
| 50USDT (ERC20) | 1.2630LTC |
| 100USDT (ERC20) | 2.5260LTC |
| 250USDT (ERC20) | 6.3149LTC |
| 500USDT (ERC20) | 12.6298LTC |
| 1,000USDT (ERC20) | 25.2596LTC |
| 5,000USDT (ERC20) | 126.2982LTC |
| 10,000USDT (ERC20) | 252.5964LTC |
At market prices of $0.998766 per USDT (ERC20) and $39.5400 per LTC (21 Nov 2026), 500 USDT (ERC20) is worth about 12.6298 LTC.
Convert Litecoin to Tether (USDT) on Ethereum
| LTC | USDT (ERC20) at market price |
|---|---|
| 0.77LTC | 30.4834USDT (ERC20) |
| 1LTC | 39.5889USDT (ERC20) |
| 2.5LTC | 98.9721USDT (ERC20) |
| 5LTC | 197.9443USDT (ERC20) |
| 10LTC | 395.8885USDT (ERC20) |
| 25LTC | 989.7213USDT (ERC20) |
| 100LTC | 3,958.89USDT (ERC20) |
| 250LTC | 9,897.21USDT (ERC20) |
Going the other way, 10 LTC is worth about 395.8885 USDT (ERC20) at the same prices.
How to Exchange Tether (ERC20) to Litecoin
Select USDT and LTC
Pick USDT in “You send” and LTC in “You get”, then enter the amount.
Enter Litecoin Address
Paste the Litecoin address that should receive the LTC. Then enter the Ethereum address you send USDT from; a refund, if ever needed, goes there.
Send Tether (ERC20)
Send exactly the amount shown from your own Ethereum wallet to the one-time deposit address. Keep a little ETH in that wallet for the network fee.
Receive Litecoin
Your LTC arrives on Litecoin. Follow each step on the status page with your swap ID.