PEPE to USDT: Convert Pepe to Tether ERC20, No KYC
To swap PEPE to USDT, enter the PEPE amount, paste the Ethereum 0x address for the USDT and the address you send from, then transfer the PEPE to the one-time deposit address. Both tokens are ERC-20 on Ethereum, so ETH pays the gas, and there is no account or ID check.
- Within minutes
- No account · No KYC
- Paid to your wallet
- Fees included in quote
By clicking Confirm exchange, you agree to the Privacy Policy & Terms of Service.
Data by CoinGecko
PEPE to USDT (ERC20) Exchange Rate
The 1 Pepe to Tether (USDT) on Ethereum reference rate at market prices, before fees. The exact amount, minimum and maximum are shown in the exchange box before you send.
PEPE to USDT swap at a glance
Everything that is specific to swapping Pepe to Tether on GhostSwap.
Swapping into USDT locks in a dollar value without selling on a centralized exchange. Both coins live on Ethereum, so you only need a little ETH to pay the deposit fee.
- Send PEPEAbout 2–5 minutes to confirm on Ethereum
- GhostSwap swaps itAt the floating rate, fees already in the quote
- Receive USDTSent to your address; Ethereum confirms in about 2–5 minutes
How much USDT do you get for PEPE?
GhostSwap quotes at 3 Nov 2026, 13:08 UTC. What lands in your wallet: service fee and USDT network fee already deducted.
25,000,000PEPE100,000,000PEPE500,000,000PEPEThe rate floats with the market until your PEPE deposit confirms. The minimum for this pair is about 6,200,000 PEPE. Enter any amount in the exchange box above for a live quote; no account needed.
Why people convert PEPE into Tether
PEPE swings hard in both directions. After a good run, many holders want part of the gain in something that tracks the dollar, without moving it through an exchange account. Converting PEPE to USDT does that in a single transfer: you send the meme token and receive Tether at an Ethereum address you control.
Nothing leaves Ethereum on this pair. PEPE goes in as an ERC-20 token and USDT comes out as an ERC-20 token, so the wallet you already use for PEPE can receive the Tether too. MetaMask, Rabby and a Ledger all hold both.
Bear in mind what you are switching into. USDT is a dollar token issued by Tether, and Tether can freeze tokens at any address as a property of the token. It removes the price swings of PEPE, not every kind of risk.
A plain transfer, no approval to sign
Trading on a decentralised exchange usually means two transactions: an approval that lets a contract spend your PEPE, then the trade itself. This swap works differently. You make one ordinary token transfer from your wallet to the deposit address shown in the box. No contract asks for permission to spend your tokens, so there is nothing to revoke afterwards.
That transfer still costs gas in ETH. Keep a little ETH next to the PEPE, or the wallet will refuse to send. Gas rises and falls with how busy Ethereum is, and the gas fee guide covers quieter times to send.
The PEPE deposit takes about 2 to 5 minutes to confirm on Ethereum. You can follow it on Etherscan under your sending address, listed as a PEPE token transfer.
Get the amount right before you send
PEPE balances often run to many digits, and a missing or extra zero is easy to miss when typing. Copy the amount straight from your wallet into the box, then compare the two once more before sending.
The box doubles as a PEPE to USDT calculator. Enter any amount and it shows the USDT you would receive after fees, quoted off aggregated liquidity from leading crypto markets. The reference rate nearby gives 1 PEPE in USDT at market prices before fees, and the box lists this pair's minimum and maximum.
The quote is not frozen. The rate floats with the market until your PEPE deposit confirms on Ethereum, so a sharp move during those minutes changes the final figure slightly. Once the deposit confirms, most swaps finish within minutes and the USDT is sent to your 0x address.
Tether on Ethereum or on Tron
| USDT ERC20 (this pair) | USDT TRC20 | |
|---|---|---|
| Chain | Ethereum | Tron |
| Address | 0x plus 40 hex characters | Starts with T, 34 characters |
| Gas to move it | ETH | TRX |
| Wallets | MetaMask, Rabby, Ledger | TronLink, Trust Wallet |
| Explorer | Etherscan | Tronscan |
| Pair | This page | PEPE to USDT TRC20 |
Taking the dollars on Ethereum keeps everything in one wallet and one gas coin. The trade-off is cost: each later USDT transfer on Ethereum pays ETH gas, and that is usually more than Tron charges. If the Tether is headed for an app or a person on Tron, the TRC20 pair saves a step. If it stays in DeFi on Ethereum, this pair is the simpler one. The network comparison goes deeper.
PEPE from other chains does not count
The deposit must be the ERC-20 PEPE on Ethereum mainnet. Bridged copies of PEPE exist on other networks, including BNB Smart Chain and some Ethereum layer-2s, and many use the same 0x address format. A wallet will let you send them to the deposit address without a warning, but they arrive on the wrong network and are not part of this swap.
Before sending, check that the wallet is set to Ethereum or Ethereum Mainnet and that the token is PEPE on that network. Etherscan lists the official contract on the PEPE token page, so you can compare it with the one in your wallet.
The same care applies to the payout. USDT lands on Ethereum, so a wallet set to another network will not show it until you switch back to Ethereum.
Refund address and support
The address you send from is where PEPE returns if the swap stops. If a swap cannot be completed, the coins are refunded to the sender address you entered. Use your own wallet, not an exchange withdrawal, because a refund to a shared exchange address may not be credited to you.
Your swap ID comes with its own status page. If Etherscan shows the PEPE transfer confirmed and the status has been still for a long time, email support@ghostswap.io with the swap ID and the transaction hash, and do not repeat the transfer. GhostSwap is a no-KYC crypto exchange, so no name or document is part of support either. To go back into the meme token later, the reverse pair is USDT ERC20 to PEPE.
Common mistakes
- Keying in the PEPE amount manually and losing or adding a zero.
- Sending bridged PEPE from BNB Smart Chain or a layer-2 instead of Ethereum mainnet.
- Leaving no ETH in the wallet, so the PEPE transfer cannot pay gas.
- Pasting a Tron T address when the USDT on this pair is paid on Ethereum.
- Sending from an exchange withdrawal, so a refund would go to a shared address.
Going the other way? Swap USDT to PEPE
Other ways to get Tether (ERC20) (USDT)
BTC to USDT
ETH to USDT
SOL to USDT
XMR to USDT
ZEC to USDT
BNB to USDT
XRP to USDT
DOGE to USDT
TRX to USDTMore PEPE swaps
PEPE to USDT TRC20PEPE to USDT Live Price Chart
PEPE/USDT (ERC20)
Reference market prices, updated live
Convert Pepe to Tether (USDT) on Ethereum
| PEPE | USDT (ERC20) at market price |
|---|---|
| 6,200,000PEPE | 30.2968USDT (ERC20) |
| 10,000,000PEPE | 48.8659USDT (ERC20) |
| 25,000,000PEPE | 122.1647USDT (ERC20) |
| 50,000,000PEPE | 244.3294USDT (ERC20) |
| 100,000,000PEPE | 488.6587USDT (ERC20) |
| 250,000,000PEPE | 1,221.65USDT (ERC20) |
| 1,000,000,000PEPE | 4,886.59USDT (ERC20) |
| 2,500,000,000PEPE | 12,216.47USDT (ERC20) |
At market prices of $0.0000048800 per PEPE and $0.998652 per USDT (ERC20) (3 Nov 2026), 100,000,000 PEPE is worth about 488.6587 USDT (ERC20). Your exact amount, after network fees, is shown in the exchange box before you send.
Convert Tether (USDT) on Ethereum to Pepe
| USDT (ERC20) | PEPE at market price |
|---|---|
| 25USDT (ERC20) | 5,116,045.08PEPE |
| 50USDT (ERC20) | 10,232,090.16PEPE |
| 100USDT (ERC20) | 20,464,180.33PEPE |
| 250USDT (ERC20) | 51,160,450.82PEPE |
| 500USDT (ERC20) | 102,320,901.64PEPE |
| 1,000USDT (ERC20) | 204,641,803.28PEPE |
| 5,000USDT (ERC20) | 1,023,209,016.39PEPE |
| 10,000USDT (ERC20) | 2,046,418,032.79PEPE |
Going the other way, 500 USDT (ERC20) is worth about 102,320,901.64 PEPE at the same prices.
How to Exchange Pepe to Tether (ERC20)
Select PEPE and USDT
Pick PEPE in “You send” and USDT in “You get”, then enter the amount. The box shows how much USDT you get and the minimum PEPE for this pair.
Enter Tether (ERC20) Address
Paste the Ethereum address that should receive the USDT (it starts with 0x followed by 40 hexadecimal characters). Then enter the Ethereum address you send PEPE from; a refund, if ever needed, goes there.
Send Pepe
Send exactly the amount shown from your own Ethereum wallet to the one-time deposit address. Keep a little ETH in that wallet for the network fee.
Receive Tether (ERC20)
Your USDT is paid out once your PEPE deposit confirms, and Ethereum then confirms it in about 2–5 minutes. Most swaps finish within minutes. The exact time depends on how fast each network confirms your deposit. Follow each step on the status page with your swap ID.
PEPE to USDT: questions and answers
Everything you need to know about exchanging PEPE to USDT (ERC20) on GhostSwap.