ETH to DOT: Convert Ethereum to Native Polkadot, No KYC
To swap ETH to DOT, type how much Ether you want to convert, add your Polkadot payout address (it begins with 1) plus the 0x wallet you will pay from, and transfer mainnet ETH to the single-use deposit address the box generates. Native DOT then lands in your own Polkadot account, with no sign-up, no ID and no bridge contract involved.
- Within minutes
- No account · No KYC
- Paid to your wallet
- Fees included in quote
By clicking Confirm exchange, you agree to the Privacy Policy & Terms of Service.
Data by CoinGecko
ETH to DOT Exchange Rate
The 1 Ethereum to Polkadot reference rate at market prices, before fees. The exact amount, minimum and maximum are shown in the exchange box before you send.
ETH to DOT swap at a glance
Everything that is specific to swapping Ethereum to Polkadot on GhostSwap.
It is a cross-chain swap from Ethereum to Polkadot, with no bridge and no wrapped tokens.
- Send ETHAbout 2–5 minutes to confirm on Ethereum
- GhostSwap swaps itAt the floating rate, fees already in the quote
- Receive DOTSent to your address; Polkadot confirms in under a minute
How much DOT do you get for ETH?
GhostSwap quotes at 16 Nov 2026, 12:05 UTC. What lands in your wallet: service fee and DOT network fee already deducted.
The rate floats with the market until your ETH deposit confirms. The minimum for this pair is about 0.017 ETH. Enter any amount in the exchange box above for a live quote; no account needed.
Getting DOT without a bridge
Searches for an ETH to DOT bridge usually come from people who expect to lock Ether in a contract and mint something on Polkadot. This swap works another way. You send ETH to a deposit address on Ethereum, and native DOT is paid to your Polkadot account. You never hold a bridged or wrapped asset, and nothing waits in a contract on either side.
DOT is what you need to take part in Polkadot itself: staking through nomination pools or as a nominator, voting in OpenGov, and paying fees across the network. Ether cannot do any of that, even though Polkadot has smart-contract chains that speak Ethereum's language.
The guide to cross-chain swaps explains the difference between bridging and swapping in more depth.
Sending ETH from mainnet with gas to spare
Only layer-1 Ether counts here. Ether held on a rollup shares your 0x address, and a wallet will happily send it, yet it travels on another network and never reaches the order. In MetaMask or Rabby, the network label should say Ethereum before you press send.
Your wallet adds the gas cost to the transfer, also in ETH, so do not try to send your entire balance; leave a small cushion. Ethereum confirms in about 2 to 5 minutes, and the transaction is easy to follow on Etherscan.
The address you send from is the one to type into the sender field, because a refund, if ever needed, goes back there. Use a wallet you control, such as MetaMask, Rabby or a Ledger. A withdrawal straight from a trading platform leaves from a shared address that is not yours.
Your Polkadot address: 1, not 0x and not 5
Polkadot accounts use the SS58 format, and on Polkadot the address begins with 1. The same key can also be shown in the generic Substrate form beginning with 5, and the payout field rejects that form. Copy the 1 version from Nova Wallet, Talisman or SubWallet.
Some people search for a "dot eth address", which mixes two things. A .eth name or any 0x address belongs to Ethereum and cannot receive DOT. Talisman and SubWallet can hold both kinds of account side by side, so check that you copied the Polkadot one.
No memo or tag is used for this payout. Paste the address alone, then compare its first and last characters with the wallet. If you are setting up Polkadot for the first time, create the account in Nova Wallet or Talisman, write down the recovery phrase offline, and only then copy the receive address.
Asset Hub, the existential deposit and staking
Since the November 2025 migration, DOT balances, staking and governance live on Polkadot Asset Hub rather than the relay chain. Up-to-date wallets show your DOT there without any extra setup, and Subscan shows the incoming transfer.
A Polkadot account exists only while it holds at least a small minimum, called the existential deposit. A new address becomes active as soon as the payout arrives, so an empty wallet is fine as the destination. Do not later empty it below that minimum unless you mean to close it.
Once the DOT is in, you can join a nomination pool from Nova Wallet or Talisman. Staked DOT has an unbonding period before it can move again, so keep some unstaked if you may need it soon. Polkadot fees are paid in DOT, so there is no second coin to arrange.
ETH and DOT compared
| ETH (you send) | DOT (you receive) | |
|---|---|---|
| Network | Ethereum mainnet | Polkadot (Asset Hub) |
| Address | 0x plus 40 hex characters | Starts with 1 |
| Confirmation | About 2 to 5 minutes | Under a minute |
| Fee paid in | ETH | DOT |
| Wallets | MetaMask, Rabby, Ledger | Nova Wallet, Talisman, SubWallet |
| Explorer | Etherscan | Subscan |
Nothing in the two columns lines up, and that is expected for a cross-chain swap. Ethereum is an account chain secured by proof of stake, where gas prices rise and fall with demand. Polkadot is a sharded design whose system chain, Asset Hub, now carries balances and staking, with fees that stay low and are paid in DOT.
Talisman and SubWallet can sit on both sides, but they still keep the Ethereum and Polkadot accounts apart, each with its own address. When you hand over the two addresses, open each one in its own explorer first if you are unsure which is which: a 0x string belongs on Etherscan, a 1-address on Subscan.
Quote, refund and tracking
The exchange box gives the DOT you receive after fees for the ETH you enter, priced from aggregated liquidity from leading crypto markets, and it lists the minimum and maximum for this pair. Searches like "1 ETH to DOT" are answered there too: type 1 and read the result. The rate floats until the Ethereum deposit confirms; after that, most swaps finish within minutes, and Polkadot confirms the payout in under a minute.
If a swap cannot be completed, the coins are refunded to the sender address you entered. The status page under your swap ID links both transactions. Should Etherscan list the deposit as final while that page stays frozen for an unusually long time, reach support@ghostswap.io and include the swap ID plus the deposit hash; a second transfer only complicates things.
To go back, use DOT to ETH.
Common mistakes
- Sending ETH from a rollup such as Arbitrum or Base instead of Ethereum mainnet.
- Pasting the generic Substrate address that starts with 5 instead of the Polkadot address that starts with 1.
- Entering a 0x address or a .eth name as the DOT payout address.
- Leaving no ETH for gas, so the deposit transaction cannot go out.
- Staking all the DOT straight away and forgetting the unbonding wait before it can move.
Going the other way? ![]()
Swap DOT to ETH
More ETH swaps
ETH to DOT Live Price Chart
ETH/DOT
Reference market prices, updated live
Convert Ethereum to Polkadot
| ETH | DOT at market price |
|---|---|
| 0.017ETH | 42.0838DOT |
| 0.02ETH | 49.5103DOT |
| 0.05ETH | 123.7758DOT |
| 0.1ETH | 247.5516DOT |
| 0.2ETH | 495.1032DOT |
| 0.5ETH | 1,237.76DOT |
| 2.5ETH | 6,188.79DOT |
| 5ETH | 12,377.58DOT |
At market prices of $1,809.81 per ETH and $0.731084 per DOT (16 Nov 2026), 0.2 ETH is worth about 495.1032 DOT. Your exact amount, after network fees, is shown in the exchange box before you send.
Convert Polkadot to Ethereum
| DOT | ETH at market price |
|---|---|
| 41DOT | 0.016562ETH |
| 50DOT | 0.020198ETH |
| 100DOT | 0.040396ETH |
| 250DOT | 0.100989ETH |
| 500DOT | 0.201978ETH |
| 1,000DOT | 0.403956ETH |
| 5,000DOT | 2.0198ETH |
| 10,000DOT | 4.0396ETH |
Going the other way, 500 DOT is worth about 0.201978 ETH at the same prices.
How to Exchange Ethereum to Polkadot
Select ETH and DOT
Pick ETH in “You send” and DOT in “You get”, then enter the amount. The box shows how much DOT you get and the minimum ETH for this pair.
Enter Polkadot Address
Paste the Polkadot address that should receive the DOT (it starts with 1). Then enter the Ethereum address you send ETH from; a refund, if ever needed, goes there.
Send Ethereum
Send exactly the amount shown from your own Ethereum wallet to the one-time deposit address.
Receive Polkadot
Your DOT is paid out once your ETH deposit confirms, and Polkadot then confirms it in under a minute. Most swaps finish within minutes. The exact time depends on how fast each network confirms your deposit. Follow each step on the status page with your swap ID.
ETH to DOT: questions and answers
Everything you need to know about exchanging ETH to DOT on GhostSwap.