ETH to ATOM: Swap Ethereum to Cosmos Hub ATOM, No KYC
To swap ETH to ATOM, enter the ETH amount, paste the cosmos1 address that should receive the ATOM plus the 0x address you send from, then send ETH on Ethereum mainnet to the one-time deposit address. The ATOM arrives as the native coin on Cosmos Hub, so there is no bridge contract to approve and no wrapped token to unwrap, and no account or ID is asked for.
- Within minutes
- No account · No KYC
- Paid to your wallet
- Fees included in quote
By clicking Confirm exchange, you agree to the Privacy Policy & Terms of Service.
Data by CoinGecko
ETH to ATOM Exchange Rate
The 1 Ethereum to Cosmos reference rate at market prices, before fees. The exact amount, minimum and maximum are shown in the exchange box before you send.
ETH to ATOM swap at a glance
Everything that is specific to swapping Ethereum to Cosmos on GhostSwap.
It is a cross-chain swap from Ethereum to Cosmos Hub, with no bridge and no wrapped tokens.
- Send ETHAbout 2–5 minutes to confirm on Ethereum
- GhostSwap swaps itAt the floating rate, fees already in the quote
- Receive ATOMSent to your address; Cosmos Hub confirms in under a minute
Going the other way? ![]()
Swap ATOM to ETH
More ETH swaps
ETH to ATOM Live Price Chart
ETH/ATOM
Reference market prices, updated live
Convert Ethereum to Cosmos
| ETH | ATOM at market price |
|---|---|
| 0.01ETH | 13.6571ATOM |
| 0.02ETH | 27.3142ATOM |
| 0.05ETH | 68.2855ATOM |
| 0.1ETH | 136.5710ATOM |
| 0.2ETH | 273.1420ATOM |
| 0.5ETH | 682.8550ATOM |
| 2.5ETH | 3,414.27ATOM |
| 5ETH | 6,828.55ATOM |
At market prices of $1,789.08 per ETH and $1.3100 per ATOM (17 Nov 2026), 0.2 ETH is worth about 273.1420 ATOM. Your exact amount, after network fees, is shown in the exchange box before you send.
Convert Cosmos to Ethereum
| ATOM | ETH at market price |
|---|---|
| 25ATOM | 0.018305ETH |
| 50ATOM | 0.036611ETH |
| 100ATOM | 0.073222ETH |
| 250ATOM | 0.183055ETH |
| 500ATOM | 0.366110ETH |
| 1,000ATOM | 0.732220ETH |
| 5,000ATOM | 3.6611ETH |
| 10,000ATOM | 7.3222ETH |
Going the other way, 500 ATOM is worth about 0.366110 ETH at the same prices.
How to Exchange Ethereum to Cosmos
Select ETH and ATOM
Pick ETH in “You send” and ATOM in “You get”, then enter the amount. The box shows how much ATOM you get and the minimum ETH for this pair.
Enter Cosmos Address
Paste the Cosmos Hub address that should receive the ATOM (it starts with cosmos1). Add a Memo only if that address belongs to an exchange account. Then enter the Ethereum address you send ETH from; a refund, if ever needed, goes there.
Send Ethereum
Send exactly the amount shown from your own Ethereum wallet to the one-time deposit address.
Receive Cosmos
Your ATOM is paid out once your ETH deposit confirms, and Cosmos Hub then confirms it in under a minute. Most swaps finish within minutes. The exact time depends on how fast each network confirms your deposit. Follow each step on the status page with your swap ID.
Native ATOM, not a bridged copy
Many people search for an ETH to ATOM bridge. A bridge would lock your ETH in a contract and hand you a token that represents something on the other side. This swap works differently. You send ordinary ETH, and what lands at your cosmos1 address is real ATOM on Cosmos Hub, the same coin that validators stake and that pays fees on that chain.
That matters for what you can do next. Native ATOM can be delegated to a validator, used to vote on Cosmos Hub proposals and moved over IBC to other Cosmos chains. A wrapped ATOM sitting on Ethereum can do none of that until someone redeems it.
There is also nothing to sign besides one plain ETH transfer. No token approval, no contract interaction in MetaMask, no second claim step on the Cosmos side. The quote in the box already includes fees, and it is priced from aggregated liquidity from leading crypto markets, floating with the market until your ETH deposit confirms.
Send from Ethereum mainnet, not a layer 2
The ETH deposit address you get lives on Ethereum mainnet. It looks exactly like an address on Arbitrum, Optimism or Base, because all of them use the same 0x format, and that is where most failed ETH to ATOM attempts start. ETH sent from a layer 2 network to this address does not arrive on mainnet.
Before you press send in MetaMask, Rabby or a Ledger, check the network selector reads Ethereum. If your ETH sits on a layer 2, withdraw it to mainnet first with that network's own tools, then start the swap.
The transfer fee is paid in ETH on top of the amount, so do not try to send your exact balance; the wallet needs a margin for gas. Ethereum confirms in about 2 to 5 minutes, and you can follow the transaction on Etherscan with the hash your wallet shows. Once it has confirmed, most swaps finish within minutes.
The cosmos1 address and the Memo field
The payout address has to start with cosmos1. Keplr, Trust Wallet and Vultisig all show one once you add Cosmos Hub. Addresses from other Cosmos chains look similar but start differently, such as osmo1 or celestia1; those are separate chains and cannot take this payout.
The receive form also has a Memo field for ATOM. If the ATOM goes to your own wallet, leave it blank. If it goes to an exchange account, that exchange usually gives you a Memo along with the deposit address, and you paste it into the field so the exchange can match the coins to you.
One habit worth keeping: copy the address from the wallet itself, never from an old note or chat message. A cosmos1 address is long, and the form checks the format but cannot tell whether the address is yours. Mintscan shows the incoming ATOM within a minute of the payout.
What to do with the ATOM after it arrives
The payout itself gives the cosmos1 address the ATOM it needs for fees, so you can act on it right away. There is no separate gas coin to source, unlike tokens on Ethereum.
Many people who move from ETH into ATOM do it to stake. In Keplr you pick a validator, delegate, and the ATOM starts earning staking rewards set by the network. Keep a small amount undelegated so you can pay future fees. Remember that delegated ATOM is locked: undoing it takes a 21-day unbonding period before the coins can be sent again, including back to ETH.
Others hold the ATOM liquid to vote in Cosmos Hub governance or to move it over IBC to a chain like Osmosis. Whatever you do, the recovery phrase for that wallet is now the only key to the coins, so write it down before moving larger amounts.
Ethereum and Cosmos Hub side by side
| Ethereum (you send) | Cosmos Hub (you receive) | |
|---|---|---|
| Address | 0x plus 40 hex characters | starts with cosmos1 |
| Fee coin | ETH | ATOM |
| Confirmation | about 2 to 5 minutes | under a minute |
| Extra field | none | Memo, for exchange accounts only |
| Wallets | MetaMask, Rabby, Ledger | Keplr, Trust Wallet, Vultisig |
| Explorer | Etherscan | Mintscan |
The two chains share nothing: different address formats, different fee coins, different explorers. That is why the form asks for two addresses. The 0x one is where your ETH starts and where a refund would go. The cosmos1 one is where the ATOM ends up. Mixing them up is caught by the format check, but a valid address on the wrong chain is not, so read both fields once more before you send.
If the swap does not go through
The 0x sender address you entered is the refund address. If a swap cannot be completed, the coins are refunded to the sender address you entered, which here means ETH back on Ethereum mainnet.
For that reason, send from a wallet you control. ETH withdrawn straight from an exchange account leaves from the exchange's hot wallet, and a refund sent there may never be credited to you. Move it to MetaMask, Rabby or a Ledger first.
Each swap has its own status page that you can reload at any time. When Etherscan shows the deposit confirmed but the status page has not moved for a long while, write to support@ghostswap.io with the swap ID and the transaction hash. While you wait for an answer, keep the rest of your ETH where it is rather than sending a second deposit.
Common mistakes
- Sending ETH from Arbitrum, Optimism or Base to the mainnet deposit address because the 0x address looks the same.
- Pasting an osmo1 or other Cosmos-chain address instead of a Cosmos Hub address starting with cosmos1.
- Typing a Memo for a personal Keplr wallet, or leaving it out when the ATOM goes to an exchange account that issued one.
- Sending the full ETH balance so the wallet has nothing left for gas.
- Delegating all of the new ATOM at once and forgetting the 21-day unbonding period before it can move again.
ETH to ATOM: questions and answers
Everything you need to know about exchanging ETH to ATOM on GhostSwap.