AVAX to USDT ERC20: Swap Avalanche X-Chain AVAX to Tether on Ethereum
To swap AVAX to USDT ERC20, enter the AVAX amount, paste the 0x Ethereum address that should get the Tether and your X-avax1 sender address, then send AVAX from the Avalanche X-Chain to the one-time deposit address. You need no account or ID, and the USDT arrives as an ERC-20 token on Ethereum.
- Within minutes
- No account · No KYC
- Paid to your wallet
- Fees included in quote
By clicking Confirm exchange, you agree to the Privacy Policy & Terms of Service.
Data by CoinGecko
AVAX to USDT (ERC20) Exchange Rate
The 1 Avalanche to Tether (USDT) on Ethereum reference rate at market prices, before fees. The exact amount, minimum and maximum are shown in the exchange box before you send.
AVAX to USDT swap at a glance
Everything that is specific to swapping Avalanche to Tether on GhostSwap.
Swapping into USDT locks in a dollar value without selling on a centralized exchange. It is a cross-chain swap from Avalanche X-Chain to Ethereum, with no bridge and no wrapped tokens.
- Send AVAXA few seconds to confirm on Avalanche X-Chain
- GhostSwap swaps itAt the floating rate, fees already in the quote
- Receive USDTSent to your address; Ethereum confirms in about 2–5 minutes
How much USDT do you get for AVAX?
GhostSwap quotes at 21 Nov 2026, 10:10 UTC. What lands in your wallet: service fee and USDT network fee already deducted.
The rate floats with the market until your AVAX deposit confirms. The minimum for this pair is about 4.8 AVAX. Enter any amount in the exchange box above for a live quote; no account needed.
Which Avalanche chain your AVAX sits on
Avalanche runs several chains under one name, and AVAX can live on more than one of them. The X-Chain handles transfers and uses addresses that start with X-avax1. The C-Chain is the EVM chain with 0x addresses, the one MetaMask, Rabby and most dapps connect to. The P-Chain is used for staking.
This pair expects AVAX from the X-Chain. A balance on the C-Chain is the same coin, yet it sits at a different address on a different chain, so a C-Chain send cannot reach this deposit. If your AVAX shows up in MetaMask, it is C-Chain AVAX: pick AVAX C-Chain as the coin you send in the exchange box, which pays out the same Tether.
In Core, the X-Chain and C-Chain balances are listed separately. Check which one holds your coins before you start, and move them between the two inside Core if needed.
The X-avax1 address doubles as your refund address
The sender field on this pair takes only an X-Chain address. A 0x address is rejected there, because it belongs to the C-Chain. In Core you find the X-Chain address in the account details, next to the C-Chain one, and it begins with X-avax1.
That address has two jobs. It is where the AVAX leaves from, and if a swap cannot be completed, the coins are refunded to the sender address you entered. Use the X-Chain address of a wallet whose keys you hold. An exchange withdrawal comes from a shared hot wallet, and a refund to it may never reach your account.
X-Chain transactions settle in a few seconds, and the network fee is paid in AVAX from the same balance. Leave a small amount of AVAX on the X-Chain beyond the swap amount so the deposit can pay it. You can follow the deposit on Avascan.
What you hold once the Tether lands
The payout is USDT as an ERC-20 token on Ethereum, credited to the 0x address you paste. MetaMask, Rabby and a Ledger can all show it, though MetaMask may need USDT added as a token before the balance appears. Make sure the wallet is set to Ethereum mainnet, not Avalanche C-Chain, when you look for it.
Arriving costs you nothing. Moving the USDT later is a different matter: every ERC-20 transfer pays gas in ETH, so the wallet needs a little ETH before the Tether can go anywhere. People leaving Avalanche for the first time often have no ETH at all, and their USDT sits unmovable until they add some.
Tether is a centrally issued token. Its issuer can freeze USDT at an address, which is a property of the token and applies on every chain it runs on. AVAX has no issuer with that ability.
AVAX and USDT ERC20 compared
| AVAX (you send) | USDT ERC20 (you receive) | |
|---|---|---|
| Chain | Avalanche X-Chain | Ethereum |
| Address | Starts with X-avax1 | 0x plus 40 hex characters |
| Confirmation | A few seconds | About 2 to 5 minutes |
| Fee paid in | AVAX | ETH |
| Wallets | Core (X-Chain address) | MetaMask, Rabby, Ledger |
| Explorer | Avascan | Etherscan |
Nothing on the left column carries over to the right. The address format, the coin that pays fees and the explorer all switch when you cross from Avalanche to Ethereum. The time row explains where the wait comes from: the X-Chain deposit is quick, and the Ethereum side takes a few minutes to confirm the USDT payout on Etherscan.
Why Tether on Ethereum and not on Avalanche
USDT also exists on the Avalanche C-Chain, and some people only need that. If you want to stay inside Avalanche apps, AVAX to USDT on Avalanche keeps you on a 0x C-Chain address with AVAX for gas.
This pair is for the other case: the dollar balance has to end up on Ethereum. A payment request in USDT ERC20, an Ethereum lending app, a hardware wallet already set up for Ethereum, or an exchange deposit that only lists ERC20 are common reasons. Moving value that way in one step avoids bridging, where you would hold a wrapped asset while it crosses.
The trade-off is cost later on. Ethereum gas is usually higher than fees on Avalanche, so a USDT ERC20 balance that gets moved often is more expensive to manage than the same balance on the C-Chain. The guide to stablecoin transfers across networks compares the options.
Rate, timing and support
Enter an AVAX amount and the exchange box works as a calculator: it shows the USDT you receive after fees, priced from aggregated liquidity from leading crypto markets. The reference rate beside it is the market price of 1 AVAX in USDT before fees. The rate floats with the market until your AVAX deposit confirms, and the box lists this pair's minimum and maximum.
Once the deposit confirms on the X-Chain, most swaps finish within minutes, and Ethereum then needs about 2 to 5 minutes to confirm the USDT. Your swap ID opens a status page that marks off each stage as it happens.
If Avascan shows your AVAX confirmed and the status page has not moved for a long time, write to support@ghostswap.io with the swap ID and the X-Chain transaction ID. Hold off on a second AVAX deposit in the meantime.
Common mistakes
- Sending C-Chain AVAX from MetaMask to a pair that expects X-Chain AVAX.
- Entering a 0x C-Chain address as the sender address on this pair.
- Spending every last bit of X-Chain AVAX and leaving none for the deposit fee.
- Receiving USDT ERC20 with no ETH in the wallet, then being unable to move it.
- Looking for the USDT in a wallet that is still set to Avalanche C-Chain instead of Ethereum.
Going the other way? ![]()
Swap USDT to AVAX
Other ways to get Tether (ERC20) (USDT)
More AVAX swaps
AVAX to USDT Live Price Chart
AVAX/USDT (ERC20)
Reference market prices, updated live
Convert Avalanche to Tether (USDT) on Ethereum
| AVAX | USDT (ERC20) at market price |
|---|---|
| 5AVAX | 31.9435USDT (ERC20) |
| 10AVAX | 63.8871USDT (ERC20) |
| 25AVAX | 159.7177USDT (ERC20) |
| 50AVAX | 319.4354USDT (ERC20) |
| 100AVAX | 638.8708USDT (ERC20) |
| 250AVAX | 1,597.18USDT (ERC20) |
| 1,000AVAX | 6,388.71USDT (ERC20) |
| 2,500AVAX | 15,971.77USDT (ERC20) |
At market prices of $6.3800 per AVAX and $0.998637 per USDT (ERC20) (21 Nov 2026), 100 AVAX is worth about 638.8708 USDT (ERC20). Your exact amount, after network fees, is shown in the exchange box before you send.
Convert Tether (USDT) on Ethereum to Avalanche
| USDT (ERC20) | AVAX at market price |
|---|---|
| 25USDT (ERC20) | 3.9132AVAX |
| 50USDT (ERC20) | 7.8263AVAX |
| 100USDT (ERC20) | 15.6526AVAX |
| 250USDT (ERC20) | 39.1315AVAX |
| 500USDT (ERC20) | 78.2631AVAX |
| 1,000USDT (ERC20) | 156.5262AVAX |
| 5,000USDT (ERC20) | 782.6309AVAX |
| 10,000USDT (ERC20) | 1,565.26AVAX |
Going the other way, 500 USDT (ERC20) is worth about 78.2631 AVAX at the same prices.
How to Exchange Avalanche to Tether (ERC20)
Select AVAX and USDT
Pick AVAX in “You send” and USDT in “You get”, then enter the amount. The box shows how much USDT you get and the minimum AVAX for this pair.
Enter Tether (ERC20) Address
Paste the Ethereum address that should receive the USDT (it starts with 0x followed by 40 hexadecimal characters). Then enter the Avalanche X-Chain address you send AVAX from; a refund, if ever needed, goes there.
Send Avalanche
Send exactly the amount shown from your own Avalanche X-Chain wallet to the one-time deposit address.
Receive Tether (ERC20)
Your USDT is paid out once your AVAX deposit confirms, and Ethereum then confirms it in about 2–5 minutes. Most swaps finish within minutes. The exact time depends on how fast each network confirms your deposit. Follow each step on the status page with your swap ID.
AVAX to USDT: questions and answers
Everything you need to know about exchanging AVAX to USDT (ERC20) on GhostSwap.