XAUT to AVAX: Swap Tether Gold (ERC20) to Avalanche, No KYC
To swap XAUT to AVAX, type how much Tether Gold you want to exchange, give an X-avax1 address from Core for the payout and the 0x wallet the tokens come from, then transfer the XAUT as an ERC-20 token on Ethereum to the one-time deposit address, with some ETH in the wallet for gas. Native AVAX is paid to the X-Chain with no account and no ID.
- Within minutes
- No account · No KYC
- Paid to your wallet
- Fees included in quote
By clicking Confirm exchange, you agree to the Privacy Policy & Terms of Service.
Data by CoinGecko
XAUT to AVAX Exchange Rate
The 1 Tether Gold to Avalanche reference rate at market prices, before fees. The exact amount, minimum and maximum are shown in the exchange box before you send.
XAUT to AVAX swap at a glance
Everything that is specific to swapping Tether Gold to Avalanche on GhostSwap.
It is a cross-chain swap from Ethereum to Avalanche X-Chain, with no bridge and no wrapped tokens.
- Send XAUTAbout 2–5 minutes to confirm on Ethereum
- GhostSwap swaps itAt the floating rate, fees already in the quote
- Receive AVAXSent to your address; Avalanche X-Chain confirms in a few seconds
Going the other way? ![]()
Swap AVAX to XAUT
Other ways to get Avalanche (AVAX)
XAUT to AVAX Live Price Chart
XAUT/AVAX
Reference market prices, updated live
Convert Tether Gold to Avalanche
| XAUT | AVAX at market price |
|---|---|
| 0.005XAUT | 2.3943AVAX |
| 0.01XAUT | 4.7887AVAX |
| 0.02XAUT | 9.5774AVAX |
| 0.05XAUT | 23.9434AVAX |
| 0.1XAUT | 47.8868AVAX |
| 0.2XAUT | 95.7736AVAX |
| 1XAUT | 478.8680AVAX |
| 2.5XAUT | 1,197.17AVAX |
At market prices of $4,027.28 per XAUT and $8.4100 per AVAX (11 Nov 2026), 0.1 XAUT is worth about 47.8868 AVAX. Your exact amount, after network fees, is shown in the exchange box before you send.
Convert Avalanche to Tether Gold
| AVAX | XAUT at market price |
|---|---|
| 2.5AVAX | 0.005221XAUT |
| 5AVAX | 0.010441XAUT |
| 10AVAX | 0.020883XAUT |
| 25AVAX | 0.052206XAUT |
| 50AVAX | 0.104413XAUT |
| 100AVAX | 0.208826XAUT |
| 500AVAX | 1.0441XAUT |
| 1,000AVAX | 2.0883XAUT |
Going the other way, 50 AVAX is worth about 0.104413 XAUT at the same prices.
How to Exchange Tether Gold to Avalanche
Select XAUT and AVAX
Pick XAUT in “You send” and AVAX in “You get”, then enter the amount. The box shows how much AVAX you get and the minimum XAUT for this pair.
Enter Avalanche Address
Paste the Avalanche X-Chain address that should receive the AVAX (it starts with X-avax1 (an X-Chain address; 0x C-Chain addresses are not accepted)). Then enter the Ethereum address you send XAUT from; a refund, if ever needed, goes there.
Send Tether Gold
Send exactly the amount shown from your own Ethereum wallet to the one-time deposit address. Keep a little ETH in that wallet for the network fee.
Receive Avalanche
Your AVAX is paid out once your XAUT deposit confirms, and Avalanche X-Chain then confirms it in a few seconds. Most swaps finish within minutes. The exact time depends on how fast each network confirms your deposit. Follow each step on the status page with your swap ID.
Leaving a gold token for a network coin
Tether Gold is a token on Ethereum that tracks physical gold: each XAUT represents one troy ounce held for the token by its issuer. AVAX is something else entirely, the native coin of Avalanche, used for fees, staking and apps on that network. Swapping one for the other trades a gold-linked balance for exposure to a volatile crypto asset, so it is worth being sure that is what you want.
People take this route for practical reasons: to pay fees and use apps on Avalanche, to stake AVAX, or to move value off Ethereum to a chain with lower fees. The swap does not touch the gold itself; it exchanges the token at market value.
As a centrally issued token, XAUT can be frozen by its issuer at the token level. That is a property of XAUT, and once you hold AVAX instead, that issuer control no longer applies to the balance.
XAUT is an ERC-20 token, so ETH pays the gas
The deposit for this pair is XAUT on Ethereum, sent from a 0x address in MetaMask, Rabby or a Ledger. Sending an ERC-20 token costs gas, and that gas is paid in ETH, not in XAUT. A wallet holding only XAUT cannot send it. Put a little ETH in the same address first.
Make sure the wallet is on Ethereum mainnet. A layer-2 network or another chain with the same 0x address will show a different balance, and a token sent from there will not reach the deposit. The token should be listed as Tether Gold (XAUT) on Etherscan at your address; if you are unsure it is the real token, check it there rather than trusting a name in a wallet list.
Expect about 2 to 5 minutes for Ethereum to confirm the XAUT transfer. Gas changes with network load, so the guide to lower gas fees may help you pick a quieter time.
Receiving AVAX on the X-Chain
The payout goes to Avalanche's X-Chain, so the address starts with X-avax1. The 0x address that holds your XAUT cannot receive it. A 0x address on Avalanche would be a C-Chain address, and the form does not accept that here.
Install Core, open the X-Chain view and copy the address. If Core shows avax1 without a prefix, add X- in front. The wallet can be brand new: AVAX arriving on the X-Chain pays its own fees later, so you do not need to fund it with anything first.
After the payout, Core can move AVAX to the C-Chain for Avalanche apps or to the P-Chain for staking. Each of those moves is a cross-chain transfer inside the wallet and costs a small AVAX fee.
XAUT and AVAX at a glance
| XAUT (you send) | AVAX (you receive) | |
|---|---|---|
| Type | ERC-20 gold token | Native coin |
| Chain | Ethereum | Avalanche X-Chain |
| Address | 0x plus 40 hex characters | Starts with X-avax1 |
| Confirmation | About 2 to 5 minutes | A few seconds |
| Fee paid in | ETH | AVAX |
| Wallets | MetaMask, Rabby, Ledger | Core (X-Chain address) |
| Explorer | Etherscan | Avascan |
The fee row is the one to act on before you start. On the sending side, gas is paid in a coin you are not swapping, so the wallet needs ETH next to the XAUT. On the receiving side, AVAX is its own fee coin, so nothing extra is needed. The type row matters for the decision itself: you are giving up a gold-linked token for a coin whose price moves with the crypto market.
How the quote works
Enter the XAUT amount and the box shows the AVAX you will receive after fees, priced from aggregated liquidity from leading crypto markets. Gold moves slowly and AVAX moves quickly, so most of the change in the quote comes from the AVAX side. The rate floats until the XAUT deposit confirms on Ethereum.
The reference rate next to the box is the market price before fees. For comparison with other sites, use the after-fee amount in the box.
After the deposit confirms, most swaps finish within minutes, and the X-Chain settles the AVAX in a few seconds. The box lists the XAUT minimum and maximum too. No account or ID is part of the process; GhostSwap is a no-KYC crypto exchange and needs only the two addresses and the deposit. To return to gold later, use AVAX to XAUT.
Refund address and tracking
Should anything go wrong, the XAUT returns to the wallet it came from. If a swap cannot be completed, the coins are refunded to the sender address you entered. Use your own MetaMask, Rabby or Ledger address, not an exchange account.
The swap ID you get links to a live status page. The XAUT transfer opens on Etherscan by its transaction hash; look under the token transfers for that hash, since the main value field shows zero ETH for a token send. The AVAX payout shows on Avascan under your X-avax1 address.
If Etherscan shows the XAUT transfer confirmed and the status page has been still for a long while, send the swap ID and that Ethereum hash to support@ghostswap.io. Do not send the tokens again in the meantime.
Common mistakes
- Trying to send XAUT with no ETH in the wallet, so the token transfer cannot pay gas.
- Sending from a layer-2 or another chain instead of Ethereum mainnet.
- Entering the 0x address that holds the XAUT as the AVAX payout address.
- Leaving the X- prefix off an avax1 address copied from Core.
- Reading the zero ETH value on Etherscan as a failed send, instead of checking the token transfer line.
XAUT to AVAX: questions and answers
Everything you need to know about exchanging XAUT to AVAX on GhostSwap.