USDT Polygon to USDT ERC20: Send Tether From Polygon to Ethereum, No KYC
To move USDT from Polygon to Ethereum, pick USDT Polygon to send and USDT ERC20 to receive, paste your Ethereum 0x address and your Polygon sender address, then make one transfer on Polygon PoS to the deposit address shown. No sign-up or ID is needed, and the ERC-20 Tether is sent once Polygon confirms your deposit, which takes about a minute.
- Within minutes
- No account · No KYC
- Paid to your wallet
- Fees included in quote
By clicking Confirm exchange, you agree to the Privacy Policy & Terms of Service.
Data by CoinGecko
USDT (Polygon) to USDT (ERC20) Exchange Rate
The 1 Tether (USDT) on Polygon to Tether (USDT) on Ethereum reference rate at market prices, before fees.
USDT Polygon to USDT swap at a glance
Send USDT Polygon from MetaMask or Rabby.
It is a cross-chain swap from Polygon PoS to Ethereum, with no bridge and no wrapped tokens.
- Send USDT PolygonAbout a minute to confirm on Polygon PoS
- GhostSwap swaps itAt the floating rate, fees already in the quote
- Receive USDTSent to your address; Ethereum confirms in about 2–5 minutes
How much USDT do you get for USDT Polygon?
GhostSwap quotes at 22 Nov 2026, 10:31 UTC, after the service fee and the cost of sending the USDT to your wallet.
The rate floats with the market until your USDT Polygon deposit confirms.
One 0x address, two networks
MetaMask and Rabby use the same 0x address on Polygon and on Ethereum. That makes this move look trivial, and it is the source of most confusion. The Tether on Polygon and the Tether on Ethereum are separate tokens on separate chains, even when the address is identical. Switching the wallet's network only changes which chain you look at; it moves nothing.
So you can paste your own address as the payout, the same one that holds the Polygon USDT today. After the swap, switch the wallet to Ethereum mainnet and the ERC-20 USDT appears there. If the balance stays blank, add USDT to the wallet's token list for Ethereum.
A Ledger works the same way through MetaMask or Rabby. The one exception is a smart-contract wallet that was deployed only on Polygon. Its address may not be controlled by you on Ethereum, so for the payout use an ordinary account address whose keys you hold.
Why move Tether from Polygon to Ethereum
Polygon PoS is cheap to use, so many people get paid, trade or play games there. Ethereum is where a larger share of lending apps, payment processors and treasury setups expect USDT. People move across when a service accepts ERC20 only, when they want the Tether on a hardware wallet already organised around Ethereum, or when they are consolidating balances onto one chain.
It is not a move that saves money. Ethereum gas is usually higher than Polygon fees, and that applies to every later transfer as well, not just the first. The payout's network fee is already inside the quote, so the box shows the ERC-20 USDT you receive after it.
Rates come from aggregated liquidity from leading crypto markets. Even for Tether to Tether the figure can move slightly until your Polygon deposit confirms, so read the amount in the box just before you send.
Swapping instead of bridging
Doing this yourself means a bridge. You approve the token, lock it on Polygon, wait for the checkpoint and then claim on Ethereum, usually paying ETH gas at the claim step. That last step catches many people out, because a fresh Ethereum address with no ETH cannot claim.
Here you make one ordinary Polygon transfer and receive standard ERC-20 Tether, not a wrapped or bridged copy. There is no approval, no claim step and no account. Because the ERC-20 USDT is sent to you directly, you do not need ETH at the moment of payout.
You will still need ETH afterwards to move the tokens, as the table below shows. For a wider view of how stablecoin fees differ between chains, read stablecoin fees across networks.
POL for the deposit, USDT0 in your wallet
The deposit is a token transfer on Polygon PoS, and Polygon charges gas in POL, the token that replaced MATIC as Polygon's gas coin in September 2024. A wallet with Tether and no POL cannot send, so keep a small amount there.
Some wallets now label Polygon Tether as USDT0. Tether upgraded USDT on Polygon to USDT0 in August 2025 and kept the same contract address, so that is the token this pair accepts. Look-alike tokens with similar names are another matter. If you are unsure, open the token on PolygonScan and check that its contract matches the Tether entry there.
Enter the Polygon address you send from as the sender address. A refund would come back there as Polygon USDT, so it should be your own wallet, not an exchange withdrawal. Polygon confirms the deposit in about a minute, and most swaps then finish within minutes.
Polygon and Ethereum Tether compared
| USDT Polygon (you send) | USDT ERC20 (you get) | |
|---|---|---|
| Network | Polygon PoS | Ethereum |
| Address | 0x plus 40 hex characters | Same format, often the same address |
| Gas coin | POL | ETH |
| Typical fee level | Low | Higher, varies with demand |
| Confirmation | About a minute | About 2 to 5 minutes |
| Wallets | MetaMask, Rabby | MetaMask, Rabby, Ledger |
| Explorer | PolygonScan | Etherscan |
Same issuer, same dollar claim, and Tether can freeze USDT at an address on either chain, since that control belongs to the token. The row that matters most is the gas coin. POL does not pay Ethereum gas, so put some ETH on the receiving address before you need to move the ERC-20 USDT. One way is a small second swap, USDT Polygon to ETH, paid to the same 0x address.
Refunds and a status that stops moving
If a swap cannot be completed, the coins are refunded to the sender address you entered. On this page that is your Polygon address, and the refund arrives as Polygon USDT, so POL pays for any later move.
Save the swap ID that the status page shows. Your deposit can be found on PolygonScan by its hash, and the payout on Etherscan once it leaves. If PolygonScan shows the deposit as successful and the status has not changed for a long time, email support@ghostswap.io with the swap ID and the Polygon transaction hash. Wait for a reply before sending again.
If the status says the Tether was sent but MetaMask shows nothing, check that the wallet is on Ethereum mainnet and not still on Polygon. Searching your 0x address on Etherscan settles it in seconds.
Common mistakes
- Switching MetaMask from Polygon to Ethereum and expecting the Tether to move with it.
- Sending USDT on Polygon from a wallet that holds no POL for gas.
- Receiving ERC-20 USDT on an address that has no ETH to move it later.
- Using a smart-contract wallet that exists only on Polygon as the Ethereum payout address.
- Sending Tether from Ethereum or another chain to the Polygon deposit address.
Going the other way? ![]()
Swap USDT to USDT Polygon
Other ways to get Tether (ERC20) (USDT)
USDT Polygon to USDT Live Price Chart
USDT (Polygon)/USDT (ERC20)
Reference market prices, updated live
Convert Tether (USDT) on Polygon to Tether (USDT) on Ethereum
| USDT (Polygon) | USDT (ERC20) at market price |
|---|---|
| 31USDT (Polygon) | 31.0000USDT (ERC20) |
| 50USDT (Polygon) | 50.0000USDT (ERC20) |
| 100USDT (Polygon) | 100.0000USDT (ERC20) |
| 250USDT (Polygon) | 250.0000USDT (ERC20) |
| 500USDT (Polygon) | 500.0000USDT (ERC20) |
| 1,000USDT (Polygon) | 1,000.00USDT (ERC20) |
| 5,000USDT (Polygon) | 5,000.00USDT (ERC20) |
| 10,000USDT (Polygon) | 10,000.00USDT (ERC20) |
At market prices of $0.998715 per USDT (Polygon) and $0.998715 per USDT (ERC20) (22 Nov 2026), 500 USDT (Polygon) is worth about 500.0000 USDT (ERC20).
Convert Tether (USDT) on Ethereum to Tether (USDT) on Polygon
| USDT (ERC20) | USDT (Polygon) at market price |
|---|---|
| 31USDT (ERC20) | 31.0000USDT (Polygon) |
| 50USDT (ERC20) | 50.0000USDT (Polygon) |
| 100USDT (ERC20) | 100.0000USDT (Polygon) |
| 250USDT (ERC20) | 250.0000USDT (Polygon) |
| 500USDT (ERC20) | 500.0000USDT (Polygon) |
| 1,000USDT (ERC20) | 1,000.00USDT (Polygon) |
| 5,000USDT (ERC20) | 5,000.00USDT (Polygon) |
| 10,000USDT (ERC20) | 10,000.00USDT (Polygon) |
Going the other way, 500 USDT (ERC20) is worth about 500.0000 USDT (Polygon) at the same prices.
How to Exchange Tether (Polygon) to Tether (ERC20)
Select USDT Polygon and USDT
Pick USDT Polygon in “You send” and USDT in “You get”, then enter the amount.
Enter Tether (ERC20) Address
Paste the Ethereum address that should receive the USDT. Sending USDT to an address on another network can lose the coins. Then enter the Polygon PoS address you send USDT Polygon from; a refund, if ever needed, goes there.
Send Tether (Polygon)
Send exactly the amount shown from your own Polygon PoS wallet to the one-time deposit address. Keep a little POL in that wallet for the network fee.
Receive Tether (ERC20)
Your USDT arrives on Ethereum. Follow each step on the status page with your swap ID.