POL to BTC: Swap Polygon (POL) for Native Bitcoin, No KYC
To swap POL to BTC, enter the POL amount, paste a Bitcoin address that starts with bc1, 3 or 1 plus the Polygon PoS address you send from, then send POL on Polygon PoS to the one-time deposit address. Native BTC lands on the Bitcoin chain with no account and no ID, and nothing wrapped sits in between.
- Within minutes
- No account · No KYC
- Paid to your wallet
- Fees included in quote
By clicking Confirm exchange, you agree to the Privacy Policy & Terms of Service.
Data by CoinGecko
POL to BTC Exchange Rate
The 1 Polygon to Bitcoin reference rate at market prices, before fees. The exact amount, minimum and maximum are shown in the exchange box before you send.
POL to BTC swap at a glance
Everything that is specific to swapping Polygon to Bitcoin on GhostSwap.
It is a cross-chain swap from Polygon PoS to Bitcoin, with no bridge and no wrapped tokens.
- Send POLAbout a minute to confirm on Polygon PoS
- GhostSwap swaps itAt the floating rate, fees already in the quote
- Receive BTCSent to your address; Bitcoin confirms in one to three blocks
Other ways to get Bitcoin (BTC)
More POL swaps
Live prices: Bitcoin price today
POL to BTC Live Price Chart
POL/BTC
Reference market prices, updated live
Convert Polygon to Bitcoin
| POL | BTC at market price |
|---|---|
| 250POL | 0.000313BTC |
| 500POL | 0.000627BTC |
| 1,000POL | 0.001254BTC |
| 2,500POL | 0.003135BTC |
| 5,000POL | 0.006270BTC |
| 10,000POL | 0.012539BTC |
| 50,000POL | 0.062696BTC |
| 100,000POL | 0.125392BTC |
At market prices of $0.074073 per POL and $59,073.00 per BTC (22 Nov 2026), 5,000 POL is worth about 0.006270 BTC. Your exact amount, after network fees, is shown in the exchange box before you send.
Convert Bitcoin to Polygon
| BTC | POL at market price |
|---|---|
| 0.0005BTC | 398.7485POL |
| 0.001BTC | 797.4971POL |
| 0.002BTC | 1,594.99POL |
| 0.005BTC | 3,987.49POL |
| 0.01BTC | 7,974.97POL |
| 0.02BTC | 15,949.94POL |
| 0.1BTC | 79,749.71POL |
| 0.2BTC | 159,499.41POL |
Going the other way, 0.01 BTC is worth about 7,974.97 POL at the same prices.
How to Exchange Polygon to Bitcoin
Select POL and BTC
Pick POL in “You send” and BTC in “You get”, then enter the amount. The box shows how much BTC you get and the minimum POL for this pair.
Enter Bitcoin Address
Paste the Bitcoin address that should receive the BTC (it starts with bc1, 3 or 1). Then enter the Polygon PoS address you send POL from; a refund, if ever needed, goes there.
Send Polygon
Send exactly the amount shown from your own Polygon PoS wallet to the one-time deposit address.
Receive Bitcoin
Your BTC is paid out once your POL deposit confirms, and Bitcoin then confirms it in one to three blocks. Most swaps finish within minutes. The exact time depends on how fast each network confirms your deposit. Follow each step on the status page with your swap ID.
From a gas token to a store of value
POL is the coin that pays for every transaction on Polygon PoS, and it is also staked to secure that chain. People usually hold it because they use apps there: a DeFi position, a game, an NFT market. When that activity winds down, the leftover POL often sits idle in MetaMask or Rabby.
Moving it into Bitcoin is a common way to tidy up. BTC lives on a separate proof-of-work chain, it does not depend on any app ecosystem, and it can sit in a hardware wallet for years without any upkeep. That is the honest reason most people pick this direction.
The trade-off is that both coins float against the dollar. You are swapping one volatile asset for another, not parking value. If you want a steady dollar balance on the way out of Polygon, a stablecoin pair such as POL to USDT (TRC20) fits that goal better.
POL lives on Polygon PoS for this pair
The deposit must be POL on the Polygon PoS network. POL also exists as a token on Ethereum mainnet, and both versions sit at the same kind of 0x address. A wallet set to Ethereum will happily send Ethereum-side POL to the deposit address, but the swap only watches Polygon PoS and cannot credit it.
Open MetaMask or Rabby and check the network selector before you press send. It should say Polygon, Polygon PoS or Polygon Mainnet. If your POL is on Ethereum, move it across to Polygon first.
POL replaced MATIC as the chain's coin, so older wallets, exports and bookmarks may still show the MATIC name. The asset you send here is the current POL on Polygon PoS. Polygon confirms the deposit in about a minute, and PolygonScan shows it the moment it is in a block.
Leave a little POL behind for the fee
On this pair the coin you swap is also the coin that pays gas. If you try to send your whole balance, MetaMask either rejects the transaction or shrinks the amount without asking, and the deposit no longer matches the figure in the box.
Enter a POL amount a bit below your full balance and keep the rest in the wallet. Polygon gas is small, so the reserve does not need to be large, just enough for one transfer. The leftover stays yours and can cover later moves on Polygon.
Then send exactly the amount the box shows, in a single transaction. Splitting it into two sends, or adding a few POL on top afterwards, makes the deposit harder to match. If you change your mind about the amount, start a new swap in the box rather than sending a second top-up to the old deposit address.
Polygon PoS and Bitcoin side by side
| POL (you send) | BTC (you receive) | |
|---|---|---|
| Network | Polygon PoS | Bitcoin |
| Address | 0x plus 40 hex characters | bc1, 3 or 1 prefix |
| Confirmation | About a minute | One to three blocks |
| Fee paid in | POL | BTC |
| Wallets | MetaMask, Rabby | Sparrow, Electrum, hardware wallet |
| Explorer | PolygonScan | mempool.space |
The two sides share nothing. The account-style 0x address from Polygon cannot hold Bitcoin, and a Bitcoin wallet has no idea what POL is. Keep the Polygon wallet open for the deposit and a Bitcoin wallet open for the receive address. Polygon is fast, so the slow part of this swap is usually the Bitcoin block that confirms your payout, which arrives roughly every ten minutes on average.
Choosing the Bitcoin address
Bitcoin offers several address types, and the payout field accepts the common ones. Native SegWit addresses start with bc1q, Taproot addresses start with bc1p, wrapped SegWit starts with 3 and legacy starts with 1. Sparrow and Electrum create bc1 addresses by default, and a Ledger or Trezor shows one in its Bitcoin app.
Generate a fresh receive address in your wallet for this swap, copy it and paste it whole. A frequent slip on this pair is pasting the Polygon 0x address into the Bitcoin field, because it was the last thing copied. Another is using an address from a test wallet, which starts with tb1 and cannot receive real BTC.
POL is worth a small fraction of a bitcoin, so the payout can be a modest number of satoshis. Before you swap a small balance, think about whether moving that BTC again later will be worth the Bitcoin fee at that time.
Rate, tracking and refunds
The box quotes the BTC you receive after fees, based on aggregated liquidity from leading crypto markets. The rate floats until your POL deposit confirms. Once it does, most swaps finish within minutes, and the BTC then waits for a Bitcoin block. The box also lists the smallest and largest POL amount this pair accepts.
GhostSwap is a no-KYC crypto exchange: no account, no email and no ID are asked for at any step. Your swap ID opens a status page, the deposit can be followed on PolygonScan and the payout on mempool.space.
If a swap cannot be completed, the coins are refunded to the sender address you entered. That should be your own Polygon PoS address in MetaMask or Rabby, not a deposit address at an exchange. If PolygonScan shows the deposit confirmed and the status page has stopped moving for a long time, write to support@ghostswap.io with the swap ID and the Polygon transaction hash.
Common mistakes
- Sending POL from Ethereum mainnet instead of Polygon PoS; only the Polygon PoS deposit is credited.
- Trying to swap the entire POL balance and leaving nothing for Polygon gas.
- Pasting the 0x Polygon address into the Bitcoin payout field.
- Using a tb1 testnet address from a developer wallet instead of a real Bitcoin address.
- Topping up the deposit address with a second transfer instead of starting a new swap.
POL to BTC: questions and answers
Everything you need to know about exchanging POL to BTC on GhostSwap.