USDT SOL to USDT BEP20: Move Tether From Solana to BNB Smart Chain
To move USDT from Solana to BEP20, enter the amount, paste the 0x address that should get the Tether on BNB Smart Chain and your Solana sender address, then send the SPL USDT to the one-time deposit address. The payout is BEP20 USDT on BNB Smart Chain, with no bridge, no account and no ID check, and you will need some BNB in that wallet to move it later.
- Within minutes
- No account · No KYC
- Paid to your wallet
- Fees included in quote
By clicking Confirm exchange, you agree to the Privacy Policy & Terms of Service.
Data by CoinGecko
USDT (Solana) to USDT (BEP20) Exchange Rate
The 1 Tether (USDT) on Solana to Tether (USDT) on BNB Smart Chain reference rate at market prices, before fees.
USDT SOL to USDT BEP20 swap at a glance
Send USDT SOL from Phantom, Solflare or a Ledger.
It is a cross-chain swap from Solana to BNB Smart Chain, with no bridge and no wrapped tokens.
- Send USDT SOLUnder a minute to confirm on Solana
- GhostSwap swaps itAt the floating rate, fees already in the quote
- Receive USDT BEP20Sent to your address; BNB Smart Chain confirms in under a minute
How much USDT BEP20 do you get for USDT SOL?
GhostSwap quotes at 21 Nov 2026, 15:20 UTC, after the service fee and the cost of sending the USDT BEP20 to your wallet.
The rate floats with the market until your USDT SOL deposit confirms.
Reasons to take Tether from Solana to BNB Smart Chain
The dollar amount barely changes on this pair; the place it lives does. Tether leaves Solana as an SPL token and arrives on BNB Smart Chain as a BEP-20 token. People make that move when the next stop for the money is on BNB Smart Chain: a payee who asked for USDT BEP20, an app that runs only there, or a Trust Wallet setup already built around that chain.
It is rarely about cost. Both chains have low fees compared with Ethereum, and neither is safer than the other. The deciding question is where you will spend or hold the USDT next.
If the answer is Ethereum or TRON instead, a different payout saves a second step; the comparison further down shows the options. The rate for this pair comes from aggregated liquidity from leading crypto markets and floats until your deposit confirms, and the box shows the BEP20 amount you receive after fees.
Before sending from Phantom or Solflare
Two things on the Solana side decide whether the deposit goes through. First, the wallet needs a little SOL, because every SPL transfer pays its fee in SOL and never in USDT. Second, the token you pick must be genuine Tether. Its mint on Solana is Es9vMFrzaCERmJfrF4H2FYD4KCoNkY11McCe8BenwNYB, and tokens that merely carry the USDT name are not credited.
In the sender field, paste the wallet's main Solana address from its receive page: 32 to 44 letters and numbers, no 0x. A Ledger used through Phantom or Solflare works the same way. Avoid sending from an exchange balance, because a refund returns to the address you type.
Solana confirms the deposit in under a minute, and Solscan shows it by signature or by your address. Most swaps finish within minutes once the deposit confirms.
An 0x address, seen on the right network
A BNB Smart Chain address starts with 0x followed by 40 hexadecimal characters, exactly like an Ethereum address. In MetaMask or Rabby the same 0x account exists on every EVM network, so the address you copy is correct. The trap comes after the payout: if the wallet is set to Ethereum, the BEP20 USDT will not appear.
Switch MetaMask or Rabby to BNB Smart Chain to see the balance, and add USDT to the token list if it is missing. Trust Wallet shows BNB Smart Chain tokens under that network's own entry.
Never paste a token contract into the payout field; it is not a wallet. If the status page says the USDT was sent and the wallet still looks empty, search your 0x address on BscScan. BNB Smart Chain confirms the transfer in under a minute, and BscScan lists it under token transfers.
Which network to choose for Tether leaving Solana
| USDT BEP20 (this page) | USDT ERC20 | USDT TRC20 | |
|---|---|---|---|
| Chain | BNB Smart Chain | Ethereum | TRON |
| Address | 0x plus 40 hex | 0x plus 40 hex | Starts with T |
| Gas coin | BNB | ETH | TRX |
| Wallets | Trust Wallet, MetaMask, Rabby | MetaMask, Rabby, Ledger | TronLink |
BEP20 and ERC20 share an address format, which is convenient and also the source of mix-ups: the same 0x address can receive on either chain, and the token only shows on the network it was sent on. Ethereum gas is usually higher than BNB Smart Chain fees. Pick the network your recipient or app names. For Ethereum use USDT SOL to USDT ERC20; for TRON use USDT SOL to USDT TRC20. A TRON address starts with T, so it cannot be confused with the other two, but its wallet needs TRX for fees.
BNB for the next move
Receiving the BEP20 USDT costs you nothing, because the payout fee is part of the quote. Moving it afterwards is a different matter. Each BEP-20 transfer, approval or app deposit pays gas in BNB, and an address that holds only USDT cannot send it.
The simplest fix is to put a small amount of BNB on the same 0x address before you need it. One way is a second small swap on USDT SOL to BNB, paid to that address. Another is to use a wallet that already holds BNB.
Keep in mind that Tether can freeze USDT held at a given address. That is a feature of the token on BNB Smart Chain, Solana and every other chain where it is issued. It has nothing to do with the swap route.
If the swap cannot finish
If a swap cannot be completed, the coins are refunded to the sender address you entered. For this pair that is your Solana address, so the SPL USDT returns to the Phantom, Solflare or Ledger wallet it came from.
Follow progress on the status page using your swap ID. If Solscan shows the deposit finalized and nothing has changed for a long time, contact support@ghostswap.io with the swap ID and the Solana transaction signature. Do not repeat the deposit while you wait for a reply.
The form rejects a Solana address pasted where an 0x address belongs. It cannot catch a valid 0x address that is not yours, such as an old exchange deposit address left on the clipboard, so read the address once more before you confirm.
Common mistakes
- Sending SPL USDT from a Phantom wallet that holds no SOL for the fee.
- Looking for the BEP20 USDT with MetaMask still set to Ethereum and assuming it never arrived.
- Picking the BEP20 payout when the recipient asked for USDT on Ethereum, which uses the same 0x address format.
- Leaving the new 0x address without any BNB, so the USDT cannot be moved again.
- Pasting the USDT token contract into the payout field instead of a wallet address.
Going the other way? ![]()
Swap USDT BEP20 to USDT SOL
Other ways to get Tether (BEP20) (USDT BEP20)
USDT SOL to USDT BEP20 Live Price Chart
USDT (Solana)/USDT (BEP20)
Reference market prices, updated live
Convert Tether (USDT) on Solana to Tether (USDT) on BNB Smart Chain
| USDT (Solana) | USDT (BEP20) at market price |
|---|---|
| 31USDT (Solana) | 31.0000USDT (BEP20) |
| 50USDT (Solana) | 50.0000USDT (BEP20) |
| 100USDT (Solana) | 100.0000USDT (BEP20) |
| 250USDT (Solana) | 250.0000USDT (BEP20) |
| 500USDT (Solana) | 500.0000USDT (BEP20) |
| 1,000USDT (Solana) | 1,000.00USDT (BEP20) |
| 5,000USDT (Solana) | 5,000.00USDT (BEP20) |
| 10,000USDT (Solana) | 10,000.00USDT (BEP20) |
At market prices of $0.998752 per USDT (Solana) and $0.998752 per USDT (BEP20) (21 Nov 2026), 500 USDT (Solana) is worth about 500.0000 USDT (BEP20).
Convert Tether (USDT) on BNB Smart Chain to Tether (USDT) on Solana
| USDT (BEP20) | USDT (Solana) at market price |
|---|---|
| 31USDT (BEP20) | 31.0000USDT (Solana) |
| 50USDT (BEP20) | 50.0000USDT (Solana) |
| 100USDT (BEP20) | 100.0000USDT (Solana) |
| 250USDT (BEP20) | 250.0000USDT (Solana) |
| 500USDT (BEP20) | 500.0000USDT (Solana) |
| 1,000USDT (BEP20) | 1,000.00USDT (Solana) |
| 5,000USDT (BEP20) | 5,000.00USDT (Solana) |
| 10,000USDT (BEP20) | 10,000.00USDT (Solana) |
Going the other way, 500 USDT (BEP20) is worth about 500.0000 USDT (Solana) at the same prices.
How to Exchange Tether (Solana) to Tether (BEP20)
Select USDT SOL and USDT BEP20
Pick USDT SOL in “You send” and USDT BEP20 in “You get”, then enter the amount.
Enter Tether (BEP20) Address
Paste the BNB Smart Chain address that should receive the USDT BEP20. Sending USDT BEP20 to an address on another network can lose the coins. Then enter the Solana address you send USDT SOL from; a refund, if ever needed, goes there.
Send Tether (Solana)
Send exactly the amount shown from your own Solana wallet to the one-time deposit address. Keep a little SOL in that wallet for the network fee.
Receive Tether (BEP20)
Your USDT BEP20 arrives on BNB Smart Chain. Follow each step on the status page with your swap ID.