USDT ERC20 to INJ: Swap Tether on Ethereum for Native Injective
To swap USDT ERC20 to INJ, enter the amount, paste your Injective address that starts with inj1 plus the 0x address you send from, then send the Tether on Ethereum to the one-time deposit address. You need no account or ID, and the INJ is paid on the Injective chain itself, not as an Ethereum token.
- Within minutes
- No account · No KYC
- Paid to your wallet
- Fees included in quote
By clicking Confirm exchange, you agree to the Privacy Policy & Terms of Service.
Data by CoinGecko
USDT (ERC20) to INJ Exchange Rate
The 1 Tether (USDT) on Ethereum to Injective Protocol reference rate at market prices, before fees.
USDT to INJ swap at a glance
Send USDT from MetaMask, Rabby or a Ledger.
It is a cross-chain swap from Ethereum to Injective, with no bridge and no wrapped tokens.
- Send USDTAbout 2–5 minutes to confirm on Ethereum
- GhostSwap swaps itAt the floating rate, fees already in the quote
- Receive INJSent to your address; Injective confirms in under a minute
How much INJ do you get for USDT?
GhostSwap quotes at 17 Nov 2026, 16:57 UTC, after the service fee and the cost of sending the INJ to your wallet.
The rate floats with the market until your USDT deposit confirms.
From a dollar token on Ethereum to a Cosmos-built chain
The USDT you send here is Tether's ERC-20 contract on Ethereum. It lives at a 0x address and every transfer pays gas in ETH. INJ, on the other side, is the native coin of Injective, a layer 1 built with the Cosmos SDK for trading and finance apps. It pays gas on Injective, secures the chain through delegation to validators and is used in governance votes.
So this pair is a move out of a stable unit and into a coin whose value floats with the market. People do it to stake INJ with a validator, to pay gas for Injective apps, or simply to hold INJ rather than dollars. The exchange box shows the INJ you get after fees before you send anything, and the rate comes from aggregated liquidity from leading crypto markets.
Nothing is bridged or wrapped. Tether goes in on Ethereum and INJ comes out on Injective, at an address format your MetaMask has never used.
Getting the ERC20 deposit right
Tether is issued on many chains, and the same balance can look identical in a multi-chain wallet. This deposit address accepts only the Ethereum version. USDT on Tron, BNB Smart Chain, Solana or Polygon has its own entry in the exchange box and must not be sent here.
The transfer is a token call, so the wallet that holds the Tether also needs ETH to pay the gas. A wallet with plenty of USDT and zero ETH simply cannot send it. Top up a little ETH first, then send from MetaMask, Rabby or a Ledger.
Your Tether deposit is final on Ethereum after about 2 to 5 minutes. Gas changes with network load, so a quiet hour costs less; the guide to lower gas fees explains how to time it. Enter the same 0x address as the sender address, because that is where a refund would go. Keep in mind that Tether can freeze USDT at the contract level; that is a property of the token, not of the swap.
The inj1 address and the optional Memo
An Injective address starts with inj1 and is written in the bech32 style shared by Cosmos chains. Copy it from Keplr or Trust Wallet, choosing Injective as the network, and paste the whole string. The payout field rejects a 0x string, even though INJ also exists as an ERC-20 token on Ethereum. That Ethereum version is not what this pair pays.
The Memo field matters only when the INJ goes to an exchange account. Such an account gives you an inj1 deposit address plus a Memo, and both must be copied, or the deposit may not be credited to you. A personal wallet needs no Memo, so leave it empty there.
A new Keplr account can receive INJ straight away; it does not need a balance first. Check the arrival on Mintscan by searching your inj1 address.
Tether on Ethereum vs INJ on Injective
| USDT ERC20 (you send) | INJ (you receive) | |
|---|---|---|
| Chain | Ethereum mainnet | Injective |
| Address shape | 0x plus 40 hex characters | Starts with inj1 |
| Confirms in | About 2 to 5 minutes | Under a minute |
| Gas paid in | ETH | INJ |
| Memo | None | Only for exchange accounts |
| Explorer | Etherscan | Mintscan |
The two columns share nothing except that both are sent from wallets you control. The useful detail is the gas row. On the Ethereum side you must already hold ETH. On the Injective side the payout itself is the gas coin, so the INJ you receive can pay for your next Injective transaction without any extra top-up. That is unlike most token payouts, where a second coin is needed before the tokens can move again.
Staking the INJ once it lands
Many people swap Tether into INJ in order to delegate it. In Keplr you pick a validator from the Injective list and delegate part of the balance; rewards build up and can be claimed later. Keep a small amount undelegated for gas, since claiming and redelegating both cost a little INJ.
Delegated INJ cannot be moved at once. Undelegating on Injective takes about three weeks before the coins are free to send again. If you might need the funds soon, keep that part of the balance liquid.
If you would rather hold dollars again later, the reverse INJ to USDT ERC20 page covers that direction. Most swaps finish within minutes once the deposit confirms, and the status page tracks each step with your swap ID. If a swap cannot be completed, the coins are refunded to the sender address you entered. Questions go to support@ghostswap.io with the swap ID.
Common mistakes
- Sending USDT from Tron or BNB Smart Chain to the Ethereum deposit address because the wallet showed one combined Tether balance.
- Holding Tether with no ETH in the wallet, so the ERC-20 transfer cannot pay gas.
- Pasting a 0x address in the INJ payout field instead of an inj1 address from Keplr or Trust Wallet.
- Leaving out the Memo when the inj1 address belongs to an exchange account.
- Delegating all of the INJ and leaving nothing for gas, then waiting about three weeks to undelegate.
More USDT swaps
USDT to INJ Live Price Chart
USDT (ERC20)/INJ
Reference market prices, updated live
Convert Tether (USDT) on Ethereum to Injective Protocol
| USDT (ERC20) | INJ at market price |
|---|---|
| 31USDT (ERC20) | 4.3024INJ |
| 50USDT (ERC20) | 6.9393INJ |
| 100USDT (ERC20) | 13.8787INJ |
| 250USDT (ERC20) | 34.6967INJ |
| 500USDT (ERC20) | 69.3933INJ |
| 1,000USDT (ERC20) | 138.7867INJ |
| 5,000USDT (ERC20) | 693.9333INJ |
| 10,000USDT (ERC20) | 1,387.87INJ |
At market prices of $0.999264 per USDT (ERC20) and $7.2000 per INJ (17 Nov 2026), 500 USDT (ERC20) is worth about 69.3933 INJ.
Convert Injective Protocol to Tether (USDT) on Ethereum
| INJ | USDT (ERC20) at market price |
|---|---|
| 2.5INJ | 18.0133USDT (ERC20) |
| 5INJ | 36.0265USDT (ERC20) |
| 10INJ | 72.0530USDT (ERC20) |
| 25INJ | 180.1326USDT (ERC20) |
| 50INJ | 360.2652USDT (ERC20) |
| 100INJ | 720.5303USDT (ERC20) |
| 500INJ | 3,602.65USDT (ERC20) |
| 1,000INJ | 7,205.30USDT (ERC20) |
Going the other way, 50 INJ is worth about 360.2652 USDT (ERC20) at the same prices.
How to Exchange Tether (ERC20) to Injective Protocol
Select USDT and INJ
Pick USDT in “You send” and INJ in “You get”, then enter the amount.
Enter Injective Protocol Address
Paste the Injective address that should receive the INJ. Add a Memo only if that address belongs to an exchange account. Then enter the Ethereum address you send USDT from; a refund, if ever needed, goes there.
Send Tether (ERC20)
Send exactly the amount shown from your own Ethereum wallet to the one-time deposit address. Keep a little ETH in that wallet for the network fee.
Receive Injective Protocol
Your INJ arrives on Injective. Follow each step on the status page with your swap ID.