LTC to USDT BEP20: Swap Litecoin for Tether on BNB Smart Chain
To swap LTC to USDT BEP20, enter the Litecoin amount, paste a BNB Smart Chain 0x address for the Tether and the Litecoin address you send from, then send LTC to the one-time deposit address. Litecoin needs about 10 minutes to confirm the deposit, and the USDT arrives as a BEP-20 token that only moves on once the receiving wallet holds some BNB.
- Within minutes
- No account · No KYC
- Paid to your wallet
- Fees included in quote
By clicking Confirm exchange, you agree to the Privacy Policy & Terms of Service.
Data by CoinGecko
LTC to USDT (BEP20) Exchange Rate
The 1 Litecoin to Tether (USDT) on BNB Smart Chain reference rate at market prices, before fees. The exact amount, minimum and maximum are shown in the exchange box before you send.
LTC to USDT BEP20 swap at a glance
Everything that is specific to swapping Litecoin to Tether on GhostSwap.
Swapping into USDT BEP20 locks in a dollar value without selling on a centralized exchange. It is a cross-chain swap from Litecoin to BNB Smart Chain, with no bridge and no wrapped tokens.
- Send LTCAbout 10 minutes (blocks every 2.5 minutes) to confirm on Litecoin
- GhostSwap swaps itAt the floating rate, fees already in the quote
- Receive USDT BEP20Sent to your address; BNB Smart Chain confirms in under a minute
How much USDT BEP20 do you get for LTC?
GhostSwap quotes at 15 Nov 2026, 22:40 UTC. What lands in your wallet: service fee and USDT BEP20 network fee already deducted.
The rate floats with the market until your LTC deposit confirms. The minimum for this pair is about 0.67 LTC. Enter any amount in the exchange box above for a live quote; no account needed.
Picking the USDT network for your Litecoin
The search "LTC to USDT" hides a choice: Tether exists on several chains, and GhostSwap runs a separate pair for each. This page pays BEP20 on BNB Smart Chain. The table shows how it compares with the other common options.
| Payout | Address | Gas coin you need later | Pair |
|---|---|---|---|
| USDT BEP20 (this page) | 0x, BNB Smart Chain | BNB | LTC to USDT BEP20 |
| USDT TRC20 | Starts with T | TRX | LTC to USDT TRC20 |
| USDT ERC20 | 0x, Ethereum | ETH | LTC to USDT ERC20 |
| USDT SOL | Solana, no 0x | SOL | LTC to USDT SOL |
BEP20 makes sense when the place you plan to use the dollars lives on BNB Smart Chain, or when your wallet already holds BNB. If you have no BNB and no plan to get any, a network whose gas coin you already own is the easier choice. Ethereum gas is usually higher than BNB Smart Chain fees, which is why many people with smaller amounts skip ERC20.
Sending Litecoin: blocks, fee and confirmations
Litecoin produces a block about every 2.5 minutes, and the deposit for this pair is counted after roughly 10 minutes of confirmations. Your wallet sets the miner fee in LTC on top of the amount. Litecoin fees are low, so the default setting in Nexus Wallet, Exodus or Ledger Live is fine; you do not need to raise it.
Send exactly the LTC amount the box shows, in one transaction. Litecoin addresses start with ltc1, L or M, and the sender field wants the one your coins actually leave from. Most wallets pick a change address by themselves, so copy the sender from the wallet's receive screen of the same account.
To watch the deposit, paste the transaction ID into Blockchair. It shows how many confirmations the transfer has so far. Once Litecoin has counted it, most swaps finish within minutes and the Tether goes out on BNB Smart Chain.
A MetaMask or Trust Wallet address works, on the right chain
The receive address for USDT BEP20 starts with 0x and has 40 hexadecimal characters after it, exactly like an Ethereum address. In MetaMask, Rabby and Trust Wallet, one 0x address covers both chains. Handy, yet a 0x string on its own never reveals which chain the Tether sits on.
After the payout, switch the wallet to BNB Smart Chain. If the Tether still does not appear, add USDT as a custom token on that network; BscScan lists the official BEP-20 contract, and searching your address there shows the incoming transfer. Viewing the wallet on Ethereum will show an empty USDT line even though the coins have arrived.
Copy the address from the wallet itself instead of an old message or a note. If the address belongs to an exchange account, check that the exchange credits BEP20 deposits of USDT before you use it.
Why people move Litecoin into Tether
Litecoin is often used as a cheap way to move value, and its price can swing hard in a day. Turning some LTC into Tether locks the dollar value at the moment of the swap, without leaving crypto and without an account anywhere. That is the main reason for this direction: to stop a balance from moving with the market.
USDT is issued by Tether, and the issuer can freeze tokens held at a given address. That is a property of the token on every chain, BEP20 included, and worth knowing before you park savings in it. Litecoin has no issuer with that power.
The other half of the reason is where the Tether lands. BNB Smart Chain has wide wallet support, and its fees are small, so the USDT can be moved on cheaply once a little BNB sits beside it. When you want Litecoin again, USDT BEP20 to LTC reverses the trade.
How the LTC to USDT rate is worked out
Searches for "1 LTC to USDT" or an LTC to USDT calculator all want the same thing: the dollar figure for a given amount of Litecoin. The exchange box gives it. Type the LTC you plan to send and it shows the USDT BEP20 you receive after fees, priced off aggregated liquidity from leading crypto markets.
The reference rate shown on this page is the market price for one LTC in Tether before fees, useful as a sanity check. The rate floats until your deposit confirms, so a move in Litecoin during those 10 minutes changes the final number a little in either direction.
The minimum and maximum for this pair sit in the box too. There is no account, email or ID check; GhostSwap is a no-KYC crypto exchange, and the order is just two addresses and a Litecoin deposit.
Refunds and support for this pair
If a swap cannot be completed, the coins are refunded to the sender address you entered. For this pair the refund is LTC on the Litecoin chain, so the sender field must hold a Litecoin address from a wallet you control.
Exchange withdrawals are a poor source for the deposit. They leave from shared addresses, and LTC returned to one of those may never reach your account. Withdraw to your own wallet first, then send from there.
Each order gets a swap ID and a live status page. A Litecoin deposit that is still gathering confirmations is normal; give it the full time. If Blockchair shows it confirmed and the status page has stalled for a long while, email support@ghostswap.io with the swap ID and the Litecoin transaction ID, and keep the LTC where it is rather than sending more.
Common mistakes
- Looking for the USDT on the Ethereum view of MetaMask instead of switching it to BNB Smart Chain.
- Choosing this BEP20 pair when the wallet or app you use only accepts USDT on Tron or Solana.
- Keeping no BNB in the receiving wallet, so the Tether cannot be moved after it arrives.
- Typing a change address or an old address in the sender field instead of the Litecoin address you send from.
- Sending the LTC straight from an exchange withdrawal, which leaves no refund address you control.
Going the other way? ![]()
Swap USDT BEP20 to LTC
Other ways to get Tether (BEP20) (USDT BEP20)
More LTC swaps
LTC to USDT BEP20 Live Price Chart
LTC/USDT (BEP20)
Reference market prices, updated live
Convert Litecoin to Tether (USDT) on BNB Smart Chain
| LTC | USDT (BEP20) at market price |
|---|---|
| 0.67LTC | 30.0939USDT (BEP20) |
| 1LTC | 44.9163USDT (BEP20) |
| 2.5LTC | 112.2908USDT (BEP20) |
| 5LTC | 224.5816USDT (BEP20) |
| 10LTC | 449.1632USDT (BEP20) |
| 25LTC | 1,122.91USDT (BEP20) |
| 100LTC | 4,491.63USDT (BEP20) |
| 250LTC | 11,229.08USDT (BEP20) |
At market prices of $44.8900 per LTC and $0.999414 per USDT (BEP20) (16 Nov 2026), 10 LTC is worth about 449.1632 USDT (BEP20). Your exact amount, after network fees, is shown in the exchange box before you send.
Convert Tether (USDT) on BNB Smart Chain to Litecoin
| USDT (BEP20) | LTC at market price |
|---|---|
| 25USDT (BEP20) | 0.556591LTC |
| 50USDT (BEP20) | 1.1132LTC |
| 100USDT (BEP20) | 2.2264LTC |
| 250USDT (BEP20) | 5.5659LTC |
| 500USDT (BEP20) | 11.1318LTC |
| 1,000USDT (BEP20) | 22.2636LTC |
| 5,000USDT (BEP20) | 111.3181LTC |
| 10,000USDT (BEP20) | 222.6362LTC |
Going the other way, 500 USDT (BEP20) is worth about 11.1318 LTC at the same prices.
How to Exchange Litecoin to Tether (BEP20)
Select LTC and USDT BEP20
Pick LTC in “You send” and USDT BEP20 in “You get”, then enter the amount. The box shows how much USDT BEP20 you get and the minimum LTC for this pair.
Enter Tether (BEP20) Address
Paste the BNB Smart Chain address that should receive the USDT BEP20 (it starts with 0x followed by 40 hexadecimal characters (the same format as Ethereum)). Then enter the Litecoin address you send LTC from; a refund, if ever needed, goes there.
Send Litecoin
Send exactly the amount shown from your own Litecoin wallet to the one-time deposit address.
Receive Tether (BEP20)
Your USDT BEP20 is paid out once your LTC deposit confirms, and BNB Smart Chain then confirms it in under a minute. Most swaps finish within minutes. The exact time depends on how fast each network confirms your deposit. Follow each step on the status page with your swap ID.
LTC to USDT BEP20: questions and answers
Everything you need to know about exchanging LTC to USDT (BEP20) on GhostSwap.