BTC to HYPE: Swap Bitcoin for Hyperliquid on HyperEVM
To swap BTC to HYPE, enter the BTC amount, paste the HyperEVM 0x address that should receive the HYPE and the Bitcoin address you send from, then send BTC to the one-time deposit address. Your HYPE is paid on HyperEVM once the Bitcoin deposit confirms, with no account and no ID.
- Within minutes
- No account · No KYC
- Paid to your wallet
- Fees included in quote
By clicking Confirm exchange, you agree to the Privacy Policy & Terms of Service.
Data by CoinGecko
BTC to HYPE Exchange Rate
The 1 Bitcoin to Hyperliquid reference rate at market prices, before fees. The exact amount, minimum and maximum are shown in the exchange box before you send.
BTC to HYPE swap at a glance
Everything that is specific to swapping Bitcoin to Hyperliquid on GhostSwap.
It is a cross-chain swap from Bitcoin to HyperEVM (Hyperliquid), with no bridge and no wrapped tokens.
- Send BTCOne to three blocks to confirm on Bitcoin
- GhostSwap swaps itAt the floating rate, fees already in the quote
- Receive HYPESent to your address; HyperEVM (Hyperliquid) confirms in under a minute
Going the other way? Swap HYPE to BTC
More BTC swaps
BTC to USDT TRC20
Live prices: Bitcoin price today
BTC to HYPE Live Price Chart
BTC/HYPE
Reference market prices, updated live
Convert Bitcoin to Hyperliquid
| BTC | HYPE at market price |
|---|---|
| 0.0002BTC | 0.205702HYPE |
| 0.0005BTC | 0.514256HYPE |
| 0.001BTC | 1.0285HYPE |
| 0.002BTC | 2.0570HYPE |
| 0.005BTC | 5.1426HYPE |
| 0.01BTC | 10.2851HYPE |
| 0.05BTC | 51.4256HYPE |
| 0.1BTC | 102.8512HYPE |
At market prices of $74,022.00 per BTC and $71.9700 per HYPE (11 Nov 2026), 0.005 BTC is worth about 5.1426 HYPE. Your exact amount, after network fees, is shown in the exchange box before you send.
Convert Hyperliquid to Bitcoin
| HYPE | BTC at market price |
|---|---|
| 0.2HYPE | 0.000194BTC |
| 0.5HYPE | 0.000486BTC |
| 1HYPE | 0.000972BTC |
| 2.5HYPE | 0.002431BTC |
| 5HYPE | 0.004861BTC |
| 10HYPE | 0.009723BTC |
| 50HYPE | 0.048614BTC |
| 100HYPE | 0.097228BTC |
Going the other way, 5 HYPE is worth about 0.004861 BTC at the same prices.
How to Exchange Bitcoin to Hyperliquid
Select BTC and HYPE
Pick BTC in “You send” and HYPE in “You get”, then enter the amount. The box shows how much HYPE you get and the minimum BTC for this pair.
Enter Hyperliquid Address
Paste the HyperEVM (Hyperliquid) address that should receive the HYPE (it starts with 0x followed by 40 hexadecimal characters). Then enter the Bitcoin address you send BTC from; a refund, if ever needed, goes there.
Send Bitcoin
Send exactly the amount shown from your own Bitcoin wallet to the one-time deposit address.
Receive Hyperliquid
Your HYPE is paid out once your BTC deposit confirms, and HyperEVM (Hyperliquid) then confirms it in under a minute. Most swaps finish within minutes. The exact time depends on how fast each network confirms your deposit. Follow each step on the status page with your swap ID.
Getting BTC onto Hyperliquid without a bridge
Searches for this route are often phrased as bridging Bitcoin to Hyperliquid. A bridge would lock your BTC and issue a wrapped version on the other side, which you would then have to trade for HYPE. This swap skips both steps: you send real BTC on the Bitcoin network and receive HYPE itself, the native coin of HyperEVM.
There is no wrapped token in the middle to track or redeem later, and no account to open. You give a Bitcoin sender address and a 0x payout address, and that is the whole setup.
The rate is built from aggregated liquidity from leading crypto markets. It floats with the market until your BTC confirms, and the box shows the HYPE you receive after fees before you send. The cross-chain swap guide compares this approach with bridges in more depth.
The Bitcoin deposit: blocks and fee rate
Bitcoin produces a block roughly every ten minutes, and your deposit needs one to three blocks before the swap continues. That makes the Bitcoin side the slow half of this pair. Once it confirms, most swaps finish within minutes.
How quickly your transaction gets into a block depends on the fee rate your wallet sets. Sparrow and Electrum let you choose it; a very low rate can leave the deposit waiting in the mempool when the network is busy. You can watch it on mempool.space using the transaction ID.
Send from a wallet you control, such as Sparrow, Electrum or a hardware wallet, and enter its address as the sender. Addresses starting with bc1, 3 or 1 are all fine. Withdrawing straight from an exchange works for the deposit, but its address is a poor choice for the sender field, because a refund would go there.
Your HYPE arrives on HyperEVM
On GhostSwap, HYPE is sent on HyperEVM, Hyperliquid's EVM chain. The address is the familiar format: 0x followed by 40 hexadecimal characters. Rabby and MetaMask both work, once HyperEVM is added as a network.
Because the address format is shared with Ethereum and other EVM chains, a wallet left on Ethereum Mainnet will show nothing new after the payout. Switch it to HyperEVM, or search your address on HyperEVMScan to see the transfer directly. HyperEVM confirms the payout in under a minute.
HYPE is also the gas coin of HyperEVM, so the payout can pay its own fees. You do not need a second coin before moving it or using it in an app on that chain.
If your wallet does not list HyperEVM yet, add it from the network settings in Rabby or MetaMask before the payout, so you can watch the balance appear.
HyperEVM and Hyperliquid's trading side
Hyperliquid is a layer 1 built for an on-chain perpetuals exchange, and its order book runs on a separate part of the chain from HyperEVM. Balances on the two sides are kept apart. HYPE that lands on HyperEVM is ready for EVM apps and transfers, but it does not show up as trading margin on its own.
If your goal is to trade on Hyperliquid's exchange, move the HYPE from HyperEVM to the trading side yourself, using the transfer option in the Hyperliquid interface or a wallet that supports it. Check the current steps in Hyperliquid's own documentation before you do.
If you only want to hold HYPE, nothing further is needed. It sits at your 0x address on HyperEVM until you move it.
Bitcoin and HyperEVM side by side
| BTC (you send) | HYPE (you receive) | |
|---|---|---|
| Network | Bitcoin | HyperEVM (Hyperliquid) |
| Address | bc1, 3 or 1 prefix | 0x plus 40 hex characters |
| Confirmation | One to three blocks | Under a minute |
| Fee paid in | BTC | HYPE |
| Wallets | Sparrow, Electrum, hardware wallet | Rabby, MetaMask |
| Explorer | mempool.space | HyperEVMScan |
Almost all of the waiting happens in the first column. The Bitcoin confirmation sets the pace; the HyperEVM payout follows quickly once it is done.
The fee rows also differ. You pay the Bitcoin network fee in BTC when you send, and any later move of the HYPE on HyperEVM is paid in HYPE from the payout itself. No third coin is involved at any point.
The wallet rows matter mainly for the payout: a Bitcoin-only wallet cannot hold HYPE, so set up Rabby or MetaMask first.
Refunds and support
If a swap cannot be completed, the coins are refunded to the sender address you entered, which on this pair is your Bitcoin address. The refund is paid in BTC.
The status page tracks every stage with your swap ID. If the deposit is still unconfirmed after a long wait, check its fee rate on mempool.space first. For anything else, email support@ghostswap.io with the swap ID and your Bitcoin transaction ID.
Because refunds return to the sender field, a Bitcoin address from Sparrow, Electrum or a hardware wallet is the safest choice there. An address you control can always receive the BTC back, while a shared exchange address may not credit it to you.
A swap that is simply waiting for Bitcoin confirmations is not stuck. The status page shows the deposit as pending until the blocks arrive.
Common mistakes
- Leaving the wallet on Ethereum Mainnet and assuming the HYPE never arrived.
- Setting a very low Bitcoin fee rate, so the deposit waits in the mempool.
- Entering an exchange withdrawal address as the Bitcoin sender, where a refund could not reach you.
- Expecting HYPE on HyperEVM to appear as trading balance on Hyperliquid without moving it across.
- Pasting a Bitcoin address or a non-EVM address into the HYPE payout field.
BTC to HYPE: questions and answers
Everything you need to know about exchanging BTC to HYPE on GhostSwap.