USDT BEP20 to IMX: Swap Tether on BSC for Immutable X, No KYC
To swap USDT BEP20 to IMX, enter the USDT amount, paste the Ethereum address that should get the IMX and the BNB Smart Chain address you send from, then send the USDT on BSC to the one-time deposit address. The IMX arrives as an ERC-20 token on Ethereum mainnet, with no account, no ID and no bridge for you to run.
- Within minutes
- No account · No KYC
- Paid to your wallet
- Fees included in quote
By clicking Confirm exchange, you agree to the Privacy Policy & Terms of Service.
Data by CoinGecko
USDT (BEP20) to IMX Exchange Rate
The 1 Tether (USDT) on BNB Smart Chain to Immutable X reference rate at market prices, before fees.
USDT BEP20 to IMX swap at a glance
Send USDT BEP20 from Trust Wallet, MetaMask or Rabby.
It is a cross-chain swap from BNB Smart Chain to Ethereum, with no bridge and no wrapped tokens.
- Send USDT BEP20Under a minute to confirm on BNB Smart Chain
- GhostSwap swaps itAt the floating rate, fees already in the quote
- Receive IMXSent to your address; Ethereum confirms in about 2–5 minutes
How much IMX do you get for USDT BEP20?
GhostSwap quotes at 22 Nov 2026, 10:51 UTC, after the service fee and the cost of sending the IMX to your wallet.
The rate floats with the market until your USDT BEP20 deposit confirms.
Moving a BSC dollar balance into IMX
Plenty of people keep Tether on BNB Smart Chain because transfers there cost little. Immutable X is a different story: on this pair, IMX is paid as an ERC-20 token on Ethereum mainnet. So the swap changes two things at once, the asset and the chain. Tether goes in on BSC, and IMX comes out on Ethereum.
A common reason for this direction is gaming. Players who hold stablecoins for everyday use want IMX for the Immutable ecosystem, where it is used for fees and staking. Others simply want part of a dollar balance in a token whose price moves with the market. Either way, the trade-off is real: USDT tracks the dollar, IMX does not, and its value can fall as well as rise.
You do not run a bridge, approve a contract or hold wrapped tokens in between. The deposit is a plain BEP-20 transfer, and the payout is native IMX on Ethereum, sent to the address you paste.
The deposit: BEP-20 Tether and a little BNB
Only USDT on BNB Smart Chain counts for this pair. Tether also exists on Ethereum and Tron, and wallets often show all three under the same name. If your balance sits on another network, pick the matching pair instead, such as USDT ERC20 to IMX or USDT TRC20 to IMX.
Sending a BEP-20 token costs gas in BNB, not in USDT. Trust Wallet, MetaMask and Rabby all refuse the transfer when the BNB balance is empty, so top up a small amount first. A BSC transfer normally settles in under a minute, and its hash can be followed on BscScan.
The BSC address you send from also goes into the sender field. It must be a wallet you control, because that is where Tether returns if the swap stops. A withdrawal straight from an exchange account comes from a shared address and is a poor choice here.
One 0x address, two different chains
Addresses on BSC and on Ethereum share one shape, 0x and then 40 hexadecimal characters. That is convenient, since the MetaMask or Rabby account you send from can also receive the IMX. It also causes the most common confusion on this pair.
After the swap, people open the wallet while it is still set to BNB Smart Chain and see no IMX. Nothing is missing. Switch the wallet's network to Ethereum, and the token shows there. If it still does not appear, add IMX as a custom token or search your address on Etherscan, which lists every ERC-20 balance.
The second point is gas. IMX on Ethereum pays its fees in ETH, and BNB cannot cover them. The payout lands without any ETH in the wallet, but staking, moving or trading the IMX later needs a little ETH at that address. A Ledger works too, as long as it shows the Ethereum account.
USDT BEP20 and IMX side by side
| USDT BEP20 (you send) | IMX (you receive) | |
|---|---|---|
| Token type | BEP-20 on BNB Smart Chain | ERC-20 on Ethereum |
| Address | 0x plus 40 hex characters | 0x plus 40 hex characters |
| Gas paid in | BNB | ETH |
| Confirmation | Under a minute | About 2 to 5 minutes |
| Explorer | BscScan | Etherscan |
| Price | Tracks the US dollar | Moves with the market |
The address row is identical, and every other row differs. That is why a matching address is not proof that you are looking at the right chain. Before you send, confirm that the wallet shows BNB Smart Chain for the Tether. After the payout, switch to Ethereum to see the IMX. Keep both gas coins in mind: BNB for this deposit and ETH for anything you do with the IMX afterwards.
Quote, timing, refunds and the Tether caveat
The exchange box shows the IMX amount after fees for the Tether you enter, drawn from aggregated liquidity from leading crypto markets. The rate floats with the market until your BSC deposit confirms, and the box lists this pair's minimum and maximum before you send.
Once the deposit confirms, most swaps finish within minutes, and the IMX then needs Ethereum's own confirmation. Your swap ID opens a status page that tracks every stage. You never create an account or show an ID for it.
If a swap cannot be completed, the coins are refunded to the sender address you entered. If BscScan shows the deposit confirmed and the status page has stopped moving for a long time, write to support@ghostswap.io with the swap ID and the transaction hash rather than sending again.
One property of the token itself: Tether, as the issuer, can freeze USDT at any address. That applies to USDT on every chain, not to this swap in particular.
Common mistakes
- Sending USDT from Ethereum or Tron to the BSC deposit address.
- Leaving no BNB in the sending wallet, so the BEP-20 transfer cannot pay its gas.
- Looking for the IMX while the wallet is still set to BNB Smart Chain instead of Ethereum.
- Forgetting that moving the IMX later needs ETH for gas, which BNB cannot replace.
- Entering an exchange deposit address as the sender, so a refund may never reach you.
Other ways to get Immutable X (IMX)
More USDT BEP20 swaps
USDT BEP20 to IMX Live Price Chart
USDT (BEP20)/IMX
Reference market prices, updated live
Convert Tether (USDT) on BNB Smart Chain to Immutable X
| USDT (BEP20) | IMX at market price |
|---|---|
| 31USDT (BEP20) | 354.1406IMX |
| 50USDT (BEP20) | 571.1945IMX |
| 100USDT (BEP20) | 1,142.39IMX |
| 250USDT (BEP20) | 2,855.97IMX |
| 500USDT (BEP20) | 5,711.94IMX |
| 1,000USDT (BEP20) | 11,423.89IMX |
| 5,000USDT (BEP20) | 57,119.45IMX |
| 10,000USDT (BEP20) | 114,238.90IMX |
At market prices of $0.998745 per USDT (BEP20) and $0.087426 per IMX (22 Nov 2026), 500 USDT (BEP20) is worth about 5,711.94 IMX.
Convert Immutable X to Tether (USDT) on BNB Smart Chain
| IMX | USDT (BEP20) at market price |
|---|---|
| 250IMX | 21.8840USDT (BEP20) |
| 500IMX | 43.7679USDT (BEP20) |
| 1,000IMX | 87.5359USDT (BEP20) |
| 2,500IMX | 218.8396USDT (BEP20) |
| 5,000IMX | 437.6793USDT (BEP20) |
| 10,000IMX | 875.3586USDT (BEP20) |
| 50,000IMX | 4,376.79USDT (BEP20) |
| 100,000IMX | 8,753.59USDT (BEP20) |
Going the other way, 5,000 IMX is worth about 437.6793 USDT (BEP20) at the same prices.
How to Exchange Tether (BEP20) to Immutable X
Select USDT BEP20 and IMX
Pick USDT BEP20 in “You send” and IMX in “You get”, then enter the amount.
Enter Immutable X Address
Paste the Ethereum address that should receive the IMX. Sending IMX to an address on another network can lose the coins. Then enter the BNB Smart Chain address you send USDT BEP20 from; a refund, if ever needed, goes there.
Send Tether (BEP20)
Send exactly the amount shown from your own BNB Smart Chain wallet to the one-time deposit address. Keep a little BNB in that wallet for the network fee.
Receive Immutable X
Your IMX arrives on Ethereum. Follow each step on the status page with your swap ID.