PEPE to LTC: Swap ERC-20 Pepe to Litecoin, No KYC
To swap PEPE to LTC, enter the PEPE amount, paste a Litecoin address that starts with ltc1, L or M and the Ethereum address you send from, then send ERC-20 PEPE to the one-time deposit address with a little ETH left in the wallet for gas. The payout is native LTC on the Litecoin network, which pays its own fees, so no second coin is needed to move it afterwards.
- Within minutes
- No account · No KYC
- Paid to your wallet
- Fees included in quote
By clicking Confirm exchange, you agree to the Privacy Policy & Terms of Service.
Data by CoinGecko
PEPE to LTC Exchange Rate
The 1 Pepe to Litecoin reference rate at market prices, before fees. The exact amount, minimum and maximum are shown in the exchange box before you send.
PEPE to LTC swap at a glance
Everything that is specific to swapping Pepe to Litecoin on GhostSwap.
It is a cross-chain swap from Ethereum to Litecoin, with no bridge and no wrapped tokens.
- Send PEPEAbout 2–5 minutes to confirm on Ethereum
- GhostSwap swaps itAt the floating rate, fees already in the quote
- Receive LTCSent to your address; Litecoin confirms in about 10 minutes (blocks every 2.5 minutes)
How much LTC do you get for PEPE?
GhostSwap quotes at 10 Nov 2026, 21:30 UTC. What lands in your wallet: service fee and LTC network fee already deducted.
25,000,000PEPE100,000,000PEPE500,000,000PEPEThe rate floats with the market until your PEPE deposit confirms. The minimum for this pair is about 5,800,000 PEPE. Enter any amount in the exchange box above for a live quote; no account needed.
From a meme token to a coin that pays its own way
PEPE and LTC sit at opposite ends of crypto. PEPE is an ERC-20 meme token on Ethereum: every move of it costs ETH in gas, and its price swings hard on mood and social media. Litecoin is one of the oldest proof-of-work chains, with its own coin, its own fees and a block every 2.5 minutes.
People take this route for practical reasons. Some want to bank part of a meme-coin run without stepping into a stablecoin. Some are tired of topping up ETH each time they move a token. Others use Litecoin for payments between wallets and want the balance in a form that moves cheaply and on its own.
The swap takes PEPE on Ethereum and pays native LTC on Litecoin. No bridge or wrapped copy sits in between. Once the LTC is in your wallet, you can send it on with LTC alone, and that is the biggest practical change from holding a token.
Gas for the PEPE deposit
Sending PEPE is an Ethereum token transfer, so the wallet charges gas in ETH, not in PEPE. A wallet that holds only PEPE cannot send it. MetaMask and Rabby will show an error or refuse to confirm until some ETH sits at the same 0x address.
The amount of gas changes with network load, and a token transfer costs more gas than a plain ETH send. Top up a small amount of ETH on Ethereum mainnet before you start. ETH on a layer-2 such as Arbitrum or Base sits at the same address but cannot pay for a mainnet transfer.
The deposit confirms on Ethereum in about 2 to 5 minutes. Follow it on Etherscan by pasting the transaction hash. For ways to time a send when gas is high, see the guide to lower gas fees.
Getting the PEPE amount and token right
PEPE balances in wallets are long numbers, and a slipped digit is easy to miss. Copy the amount from the exchange box, paste it into the send field, and read it back before you confirm. A deposit that differs from the amount shown is a common reason an order needs manual attention.
Check the token as well. Copycat tokens with the same name and frog logo exist on Ethereum, and bridged versions of PEPE live on other chains. Only the ERC-20 Pepe on Ethereum mainnet counts for this pair. If your wallet lists two PEPE entries, open the one you plan to send on Etherscan and compare its contract with the one on the Pepe token page there before sending anything.
PEPE held on BNB Chain or another network is not accepted here. Move it to Ethereum first, or use a pair for that network if one exists.
The Litecoin address for your payout
A Litecoin address starts with ltc1, L or M. The ltc1 kind is the default in most current wallets; L and M are older formats that still work, and any of the three is fine as the payout. Copy it from the receive page of Nexus Wallet, Exodus or a Ledger and paste it whole.
Two slips are worth guarding against. The first is pasting your 0x Ethereum address, which is the last thing many people copied while setting up the PEPE side. The second is a Bitcoin address: bc1 looks a lot like ltc1, and wallets that hold both coins list them side by side.
An exchange deposit address works only if it is for Litecoin on its own network, not LTC as a token on another chain. Litecoin confirms the payout in about 10 minutes, and Blockchair shows it at your address.
PEPE and LTC compared
| PEPE (you send) | LTC (you receive) | |
|---|---|---|
| Chain | Ethereum | Litecoin |
| Kind of asset | ERC-20 token | Native coin |
| Address | 0x and 40 hex characters | ltc1, L or M |
| Confirmation | About 2 to 5 minutes | About 10 minutes (2.5-minute blocks) |
| Fee paid in | ETH | LTC |
| Wallets | MetaMask, Rabby, Ledger | Nexus Wallet, Exodus, Ledger |
| Explorer | Etherscan | Blockchair |
The fee row sums up this pair. On the left, two coins are needed to move one. On the right, one coin does everything. The rate in the exchange box is quoted from aggregated liquidity from leading crypto markets and floats until the PEPE deposit confirms. From then on, most swaps finish within minutes, and the payout then takes Litecoin's own confirmation time. So before you start, check the ETH balance as carefully as the PEPE one.
Refunds come back as PEPE
If a swap cannot be completed, the coins are refunded to the sender address you entered. Here that means PEPE, returned on Ethereum to your 0x address. Moving it again will need ETH for gas, so do not drain the ETH in that wallet to zero.
Use your own MetaMask, Rabby or Ledger address as the sender, not an exchange withdrawal. Tokens refunded to a shared exchange address can be slow or impossible to credit back to you.
Your swap ID opens a status page with each stage of the order. If Etherscan shows the PEPE deposit confirmed and the status has stood still for a long while, contact support@ghostswap.io with the swap ID and the Ethereum transaction hash. To go the other way later, the reverse pair is LTC to PEPE. Neither direction asks for an account, email or ID.
Common mistakes
- Holding PEPE with no ETH in the wallet, so the deposit cannot pay gas.
- Sending a copycat or bridged PEPE instead of the ERC-20 Pepe token on Ethereum mainnet.
- Pasting a bc1 Bitcoin address or your 0x Ethereum address into the Litecoin payout field.
- Typing the long PEPE amount by hand and sending a different figure from the one in the box.
- Sending from an exchange withdrawal, so a PEPE refund lands at an address you do not control.
Going the other way? Swap LTC to PEPE
Other ways to get Litecoin (LTC)
More PEPE swaps
PEPE to LTC Live Price Chart
PEPE/LTC
Reference market prices, updated live
Convert Pepe to Litecoin
| PEPE | LTC at market price |
|---|---|
| 5,800,000PEPE | 0.604047LTC |
| 10,000,000PEPE | 1.0415LTC |
| 25,000,000PEPE | 2.6037LTC |
| 50,000,000PEPE | 5.2073LTC |
| 100,000,000PEPE | 10.4146LTC |
| 250,000,000PEPE | 26.0365LTC |
| 1,000,000,000PEPE | 104.1460LTC |
| 2,500,000,000PEPE | 260.3650LTC |
At market prices of $0.0000052500 per PEPE and $50.4100 per LTC (10 Nov 2026), 100,000,000 PEPE is worth about 10.4146 LTC. Your exact amount, after network fees, is shown in the exchange box before you send.
Convert Litecoin to Pepe
| LTC | PEPE at market price |
|---|---|
| 0.59LTC | 5,665,123.81PEPE |
| 1LTC | 9,601,904.76PEPE |
| 2.5LTC | 24,004,761.90PEPE |
| 5LTC | 48,009,523.81PEPE |
| 10LTC | 96,019,047.62PEPE |
| 25LTC | 240,047,619.05PEPE |
| 100LTC | 960,190,476.19PEPE |
| 250LTC | 2,400,476,190.48PEPE |
Going the other way, 10 LTC is worth about 96,019,047.62 PEPE at the same prices.
How to Exchange Pepe to Litecoin
Select PEPE and LTC
Pick PEPE in “You send” and LTC in “You get”, then enter the amount. The box shows how much LTC you get and the minimum PEPE for this pair.
Enter Litecoin Address
Paste the Litecoin address that should receive the LTC (it starts with ltc1, L or M). Then enter the Ethereum address you send PEPE from; a refund, if ever needed, goes there.
Send Pepe
Send exactly the amount shown from your own Ethereum wallet to the one-time deposit address. Keep a little ETH in that wallet for the network fee.
Receive Litecoin
Your LTC is paid out once your PEPE deposit confirms, and Litecoin then confirms it in about 10 minutes (blocks every 2.5 minutes). Most swaps finish within minutes. The exact time depends on how fast each network confirms your deposit. Follow each step on the status page with your swap ID.
PEPE to LTC: questions and answers
Everything you need to know about exchanging PEPE to LTC on GhostSwap.