JUP to LINK: Exchange Jupiter on Solana for Chainlink, No KYC

To swap JUP to LINK, enter the JUP amount, paste the Ethereum address that should get the LINK and the Solana address you send from, then send unstaked JUP to the one-time deposit address. The LINK is paid as an ERC-20 token on Ethereum mainnet, with no account, no ID and no bridge in between.

  • Within minutes
  • No account · No KYC
  • Paid to your wallet
  • Fees included in quote
Crypto Exchange
Buy Crypto
JUP
JUP
LINK
LINK


⚠️ Enter the exact wallet you are sending from. Your funds must be sent from this address.

By clicking Confirm exchange, you agree to the Privacy Policy & Terms of Service.

Jupiter Logo
JUP
Jupiter
Price:
$0.2187
24h Change:
-5.13%
Market Cap:
$726.10M
Volume (24h):
$69.63M
Circulating Supply:
3.32B JUP
Link Logo
LINK
Link
Price:
$8.65
24h Change:
-1.28%
Market Cap:
$6.63B
Volume (24h):
$381.62M
Circulating Supply:
766.85M LINK

Data by CoinGecko

JUP to LINK Exchange Rate

1 JUP = 0.025289 LINK

The 1 Jupiter to Link reference rate at market prices, before fees.

Live market rate

JUP to LINK swap at a glance

Send JUP from Phantom, Solflare or a Ledger.

Jupiter (JUP)You send · SPL token on Solana
LINKYou receive · ERC-20 token on Ethereum
Swap time
Within minutesdepends on network confirmations
Network fee
Paid in SOLkeep a little SOL too
Account / KYC
NoneNo sign-up, email or ID
Tracking
Live status pageJUP on Solscan · LINK on Etherscan
Your LINK address
Ethereum addressIt starts with 0x followed by 40 hexadecimal characters. Wallets: MetaMask, Rabby or a Ledger.
Reference rate
1 JUP ≈ 0.025289 LINK1 LINK ≈ 39.5436 JUP · market prices, 21 Nov 2026
  1. Send JUPUnder a minute to confirm on Solana
  2. GhostSwap swaps itAt the floating rate, fees already in the quote
  3. Receive LINKSent to your address; Ethereum confirms in about 2–5 minutes
Facts checked 21 Nov 2026

Solana token in, Ethereum token out

JUP is the token of Jupiter, the swap aggregator on Solana, and it moves as an SPL token. LINK is the token that pays Chainlink oracle node operators, and on this pair it is an ERC-20 token on Ethereum. Neither coin is native to its chain, so each one leans on a different gas coin: SOL on the way in, ETH on the way out.

Solana DeFi users pick this direction when they want part of a JUP balance in a token that lives on Ethereum, where Chainlink is widely used. Doing it by hand would mean a bridge, a wrapped asset and two sets of approvals. Here the JUP goes to a deposit address on Solana, and plain LINK is paid to your 0x address.

Both tokens move with the market, so this is a change of exposure, not a step into a stable value. If you want a dollar balance instead, look at JUP to USDT ERC20.

Getting the JUP ready to send

Only JUP you can freely transfer counts. Tokens locked in Jupiter's governance staking do not show as a spendable balance, and unstaking them comes with a waiting period. Start that early if you plan to swap staked JUP, and send only once the wallet shows the tokens as available.

Send from a wallet you control, such as Phantom, Solflare or a Ledger. The deposit is a normal SPL transfer and costs a small fee in SOL, so keep a little SOL next to the JUP. A wallet with JUP but no SOL cannot send at all.

Solana usually confirms the transfer in under a minute. You can see it on Solscan by opening the transaction signature from your wallet.

The Solana address you send from belongs in the sender field. Solana addresses are 32 to 44 letters and numbers with no 0x prefix, which makes them easy to tell apart from the Ethereum address you need for the payout.

Where the LINK should land

LINK needs an Ethereum address: 0x followed by 40 hexadecimal characters. Phantom shows an Ethereum account next to the Solana one, so you can paste that address and keep both sides in one app. MetaMask, Rabby and a Ledger work just as well.

The mix-up to avoid is pasting the Solana address you just used as the sender into the payout field. It will not receive LINK. The two fields sit close together, so check that the payout address starts with 0x.

LINK on this pair is the Ethereum mainnet token. The exchange box lists LINK on BNB Smart Chain as a separate coin, so pick the plain LINK entry if Ethereum is where you want it. Once it lands, Etherscan shows the balance even if your wallet does not list the token yet.

Receiving needs no ETH. Moving, staking or swapping the LINK afterwards does, so plan to add a little ETH to that address.

The Solana side and the Ethereum side

JUP (you send)LINK (you receive)
Token typeSPL on SolanaERC-20 on Ethereum
Address32 to 44 letters and digits, no prefix0x plus 40 hex characters
Fee coinSOLETH
ConfirmationUnder a minuteAbout 2 to 5 minutes
WalletsPhantom, Solflare, LedgerMetaMask, Rabby, Ledger
ExplorerSolscanEtherscan

The fee coin row matters most after the swap. Solana fees are tiny, while Ethereum gas is usually higher, so a LINK balance costs more to move than the JUP did. If you only plan to hold the LINK, that is fine. If you plan to move it often, keep enough ETH on hand. The address rows also explain why Phantom can serve both sides: it holds a separate account for each chain.

Rate, timing and refunds

The exchange box quotes the LINK you get after fees for the JUP you enter, based on aggregated liquidity from leading crypto markets. The rate floats until Solana confirms your deposit, and the box also lists the minimum and maximum for this pair.

From the moment the JUP is confirmed, most swaps finish within minutes. The LINK then needs Ethereum's own confirmation, about 2 to 5 minutes. Your swap ID opens a status page that shows the deposit, the conversion and the payout as they happen. At no stage do you sign up or hand over an ID.

If a swap cannot be completed, the coins are refunded to the sender address you entered. Keep that a Solana address from your own wallet; a refund sent to an exchange deposit address may never be credited to you. If Solscan shows the JUP confirmed and the status page has been still for a long time, email support@ghostswap.io with the swap ID and the signature. Do not send the JUP a second time.

Common mistakes

  • Trying to send JUP that is still staked in Jupiter governance.
  • Holding JUP with no SOL in the wallet, so the SPL transfer cannot pay its fee.
  • Pasting the Solana sender address into the LINK payout field.
  • Choosing LINK on BNB Smart Chain in the box when you wanted it on Ethereum.
  • Forgetting that moving the LINK later costs ETH gas.

JUP to LINK Live Price Chart

JUP/LINK

Loading chart...

Reference market prices, updated live

JUP

Convert Jupiter to Link

JUPLINK at market price
100JUP2.5289LINK
250JUP6.3221LINK
500JUP12.6443LINK
1,000JUP25.2886LINK
2,500JUP63.2214LINK
5,000JUP126.4428LINK
25,000JUP632.2139LINK
50,000JUP1,264.43LINK

At market prices of $0.218746 per JUP and $8.6500 per LINK (21 Nov 2026), 2,500 JUP is worth about 63.2214 LINK.

LINK

Convert Link to Jupiter

LINKJUP at market price
2.5LINK98.8590JUP
5LINK197.7179JUP
10LINK395.4358JUP
25LINK988.5895JUP
50LINK1,977.18JUP
100LINK3,954.36JUP
500LINK19,771.79JUP
1,000LINK39,543.58JUP

Going the other way, 50 LINK is worth about 1,977.18 JUP at the same prices.

How to Exchange Jupiter to Link

Line Vector
Select Crypto Currency

Select JUP and LINK

Pick JUP in “You send” and LINK in “You get”, then enter the amount.

Select Wallet Address
Line Vector

Enter Link Address

Paste the Ethereum address that should receive the LINK. Sending LINK to an address on another network can lose the coins. Then enter the Solana address you send JUP from; a refund, if ever needed, goes there.

Sent Crypto Currency
Line Vector

Send Jupiter

Send exactly the amount shown from your own Solana wallet to the one-time deposit address. Keep a little SOL in that wallet for the network fee.

Receive Crypto

Receive Link

Your LINK arrives on Ethereum. Follow each step on the status page with your swap ID.

JUP to LINK: questions and answers

How do I swap JUP to LINK?
Pick JUP to send and LINK to receive, paste your Ethereum address and your Solana sender address, then send the JUP to the deposit address shown in the box.
Can I swap JUP for LINK without an account?
Yes. You give two addresses and send the JUP, and the swap never asks for a name, email or document.
Can Phantom receive the LINK?
Yes. Phantom has an Ethereum account alongside the Solana one. Paste its 0x address as the payout address.
Can I send staked JUP?
No. Unstake it first and wait until the wallet shows it as available, then send it as a normal SPL transfer.
Do I need ETH before the LINK arrives?
An empty Ethereum address is fine for receiving LINK. You need ETH later to send, stake or swap the LINK.
How much LINK do I get for my JUP?
The box shows the exact LINK amount after fees for the JUP you enter. It floats with the market until your deposit confirms on Solana.
How long does JUP to LINK take?
Solana confirms the JUP in under a minute. After that most swaps finish within minutes, and Ethereum confirms the LINK in about 2 to 5 minutes.
Can I send JUP straight to my LINK address?
No. JUP can only go to a Solana address. Send it to the one-time deposit address, and the LINK goes to the Ethereum address you enter.
How do I swap LINK back to JUP?
Use LINK to JUP. You send LINK from Ethereum, with ETH for gas, and receive JUP on Solana.
What happens if my JUP to LINK exchange fails?
If a swap cannot be completed, the coins are refunded to the sender address you entered on Solana. For a status that stops moving, contact support@ghostswap.io with your swap ID.
How much is 1 JUP in LINK?
1 JUP is worth about 0.025289 LINK at the market rate, before fees (market prices, 21 Nov 2026). GhostSwap's quote in the exchange box already includes the service fee and the LINK network fee. The Solana network fee for sending the JUP is paid separately, in SOL. The rate floats with the market until your JUP deposit confirms.