FLIP to LINK: Swap Chainflip for Chainlink on Ethereum, No KYC

To swap FLIP to LINK, enter the FLIP amount, paste the Ethereum address that should receive the LINK and the address you send from, then send ERC-20 FLIP on Ethereum mainnet to the one-time deposit address. Both tokens live on Ethereum, so one 0x wallet with a little ETH for gas covers the whole swap, with no account or ID.

  • Within minutes
  • No account · No KYC
  • Paid to your wallet
  • Fees included in quote
Crypto Exchange
Buy Crypto
FLIP
FLIP
LINK
LINK


⚠️ Enter the exact wallet you are sending from. Your funds must be sent from this address.

By clicking Confirm exchange, you agree to the Privacy Policy & Terms of Service.

Link Logo
LINK
Link
Price:
$9.58
24h Change:
-1.30%
Market Cap:
$7.35B
Volume (24h):
$277.10M
Circulating Supply:
766.85M LINK

Data by CoinGecko

FLIP to LINK swap at a glance

Send FLIP from MetaMask, Rabby or a Ledger.

Chainflip (FLIP)You send · ERC-20 token on Ethereum
LINKYou receive · ERC-20 token on Ethereum
Swap time
Within minutesdepends on network confirmations
Network fee
Paid in ETHkeep a little ETH too
Account / KYC
NoneNo sign-up, email or ID
Tracking
Live status pageFLIP on Etherscan
Your LINK address
Ethereum addressIt starts with 0x followed by 40 hexadecimal characters. Wallets: MetaMask, Rabby or a Ledger.
Max per swap
About 4,000 FLIPThe exchange box shows the exact limit before you send.
Minimum
About 73 FLIP
  1. Send FLIPAbout 2–5 minutes to confirm on Ethereum
  2. GhostSwap swaps itAt the floating rate, fees already in the quote
  3. Receive LINKSent to your address; Ethereum confirms in about 2–5 minutes
Facts checked 14 Nov 2026

How much LINK do you get for FLIP?

GhostSwap quotes at 13 Nov 2026, 07:53 UTC, after the service fee and the cost of sending the LINK to your wallet.

Fees included
500FLIP
20.6216LINK
1,000FLIP
41.1742LINK

The rate floats with the market until your FLIP deposit confirms.

Two infrastructure tokens on one chain

FLIP is the token of Chainflip, a protocol for swapping assets across blockchains; its validators stake FLIP to take part. LINK is the token of Chainlink, the oracle network that feeds outside data such as prices into smart contracts, and it pays the node operators who provide that data. Both projects are plumbing for other apps, and both tokens circulate on Ethereum as ERC-20s.

That makes this one of the simplest pairs to set up. There is no second wallet to install and no new address format. The FLIP leaves your 0x address on Ethereum mainnet and the LINK arrives at a 0x address on the same chain, which can be the very same one.

People use this swap to rotate between the two projects, to trim a FLIP position, or to consolidate several small holdings into one. The reason is yours; the mechanics are the same either way.

Getting FLIP out of the State Chain first

Not all FLIP sits in an Ethereum wallet. FLIP that has been funded to a Chainflip State Chain account, for example to back a validator, lives on Chainflip's own network and does not show up as an ERC-20 balance in MetaMask. The deposit address for this pair only accepts ERC-20 FLIP on Ethereum.

To use State Chain FLIP, redeem it to your Ethereum address first. Redemptions have a built-in waiting period, so plan the swap for after the tokens are back, not before. Once the FLIP shows in your wallet on Etherscan, it is ready to send.

The same goes for FLIP on any other network or inside a trading platform account. Withdraw it to your own Ethereum wallet, check the balance, and then start the swap. Sending from your own wallet also keeps the refund path in your hands.

ETH for gas, before and after

Both tokens are contract tokens, so neither pays its own fees. The FLIP transfer to the deposit address is paid in ETH, and so is every later move of the LINK you receive. A wallet holding FLIP and no ETH cannot send the deposit at all.

Keep enough ETH on the sending address to cover one token transfer, with some room to spare because gas changes with network load. If you plan to move the LINK on later, for staking, to a hardware wallet or into an app, you will need ETH on the receiving address too. When both sides use the same address, one ETH balance covers both.

Ethereum gas varies across the day. Moving a token costs more gas than moving plain ETH, so a quiet period makes a real difference; the guide to lower gas fees explains how to read the estimate before confirming.

Finding the LINK in your wallet

The payout is ERC-20 LINK on Ethereum mainnet. Many wallets show LINK automatically, but some only list tokens you have added. If the balance does not appear, open your receiving address on Etherscan: the token transfer will be listed there. Then add LINK in the wallet as a token, using the contract shown on that Etherscan page rather than one copied from a search result.

LINK on BNB Smart Chain is a separate asset in the exchange box, and this pair does not pay it. Keep the wallet on Ethereum Mainnet to see the payout. The same applies to layer-2 networks, which share your 0x address but hold different balances.

Staked LINK is not involved here; what you receive is a plain wallet balance you can move or stake later. The Chainlink outlook is a separate read if you want background on the project.

Quote and timing

For any FLIP amount you type, the exchange box gives the LINK you end up with, net of the service fee and the payout's network cost. Rates come from aggregated liquidity from leading crypto markets and float with the market until the FLIP deposit confirms. The box also shows the minimum and maximum for this pair; check it before sending a small balance.

The deposit needs a handful of Ethereum confirmations, about 2 to 5 minutes. Most swaps finish within minutes once that is done, and the LINK payout confirms on Ethereum in about the same time again.

As a no-KYC crypto exchange, GhostSwap skips sign-up, email and ID entirely: the receiving address, the sender address and the FLIP deposit are everything the swap uses. The reverse pair, LINK to FLIP, works the same way.

Refunds and support

The address you send FLIP from should also be the sender address you enter. If a swap cannot be completed, the coins are refunded to the sender address you entered, as ERC-20 FLIP on Ethereum. Make it an address in MetaMask, Rabby or a Ledger that you control.

Your swap ID opens a live status page for the swap. Etherscan shows both legs: the FLIP leaving your address and the LINK arriving at the payout address. If the FLIP deposit has confirmed and the status has not changed for a long time, email support@ghostswap.io with the swap ID and the transaction hash. Do not send a second deposit while the first is open.

Common mistakes

  • Trying to swap FLIP that is still funded to a Chainflip State Chain account instead of redeemed to Ethereum.
  • Holding FLIP with no ETH, so the wallet cannot pay gas for the deposit.
  • Expecting LINK on BNB Smart Chain; this pair pays ERC-20 LINK on Ethereum only.
  • Thinking the LINK never arrived because the wallet does not list the token yet.
  • Adding a LINK contract copied from a search result instead of the one shown on Etherscan.

FLIP to LINK Live Price Chart

FLIP/LINK

Loading chart...

Reference market prices, updated live

How to Exchange Chainflip to Link

Line Vector
Select Crypto Currency

Select FLIP and LINK

Pick FLIP in “You send” and LINK in “You get”, then enter the amount.

Select Wallet Address
Line Vector

Enter Link Address

Paste the Ethereum address that should receive the LINK. Sending LINK to an address on another network can lose the coins. Then enter the Ethereum address you send FLIP from; a refund, if ever needed, goes there.

Sent Crypto Currency
Line Vector

Send Chainflip

Send exactly the amount shown from your own Ethereum wallet to the one-time deposit address. Keep a little ETH in that wallet for the network fee.

Receive Crypto

Receive Link

Your LINK arrives on Ethereum. Follow each step on the status page with your swap ID.

FLIP to LINK: questions and answers

How do I swap Chainflip to Chainlink?
Choose FLIP to send and LINK to receive, paste your Ethereum address and your sender address, then send ERC-20 FLIP to the deposit address shown in the box.
Can I swap FLIP to LINK without an account?
Yes. FLIP to LINK runs without a sign-up, an email or an ID. Your Ethereum address and the FLIP deposit are all the swap needs.
What is the FLIP token used for?
FLIP is the token of the Chainflip cross-chain swap protocol, and its validators stake it. On Ethereum it is an ERC-20 token held at a normal 0x address.
Can I swap staked FLIP?
Not while it is funded to a State Chain account. Redeem it to your Ethereum address, wait out the redemption period, then send it from your wallet.
Do I need ETH for this swap?
Yes. The FLIP deposit pays gas in ETH, and moving the LINK later does too. Keep a small ETH balance on the address.
Can I use the same address for FLIP and LINK?
Yes. Both are ERC-20 tokens on Ethereum, so the address that sends the FLIP can also receive the LINK.
How much LINK do I get for my FLIP?
The box shows the exact LINK after fees for the FLIP you enter, from aggregated liquidity from leading crypto markets. Until the FLIP deposit confirms, that number moves with the market.
How long does FLIP to LINK take?
The FLIP deposit confirms on Ethereum in about 2 to 5 minutes. Most swaps finish within minutes after that, and the LINK confirms on the same chain.
What if my FLIP to LINK swap fails?
If a swap cannot be completed, the coins are refunded to the sender address you entered. Contact support@ghostswap.io with your swap ID if the status stops moving.