DRIFT to UNI: Swap a Solana Token for Uniswap on Ethereum
To swap DRIFT to UNI, paste the Ethereum 0x address that should get the UNI and the Solana address you send from, then send DRIFT to the deposit address while a little SOL stays in your wallet for the fee. You get UNI as an ERC-20 token on Ethereum mainnet, with no account, no ID and no bridge.
- Dans quelques minutes
- Pas de compte · Aucune vérification d'identité requise
- Payé sur votre portefeuille
- Frais inclus dans le devis
En cliquant sur Confirmer l'échange, vous acceptez la Politique de confidentialité et les Conditions d'utilisation.
Données fournies par CoinGecko
Passage de DRIFT à UNI en un coup d'œil
Tout ce qui est spécifique au passage de Drift à Uniswap sur GhostSwap.
Il s'agit d'un échange inter-chaînes de Solana vers Ethereum, sans pont ni jetons encapsulés.
- Envoyer DRIFTConfirmation en moins d'une minute sur Solana
- GhostSwap l'échangeAu taux variable, les frais sont déjà inclus dans le devis.
- Recevez UNIEnvoyé à votre adresse ; Ethereum confirme en 2 à 5 minutes environ
Combien de points UNI obtient-on pour DRIFT ?
Cours de GhostSwap le 3 novembre 2026 à 13h50 UTC. Ce qui arrive sur votre portefeuille : frais de service et frais de réseau UNI déjà déduits.
Le taux de change fluctue en fonction du marché jusqu'à la confirmation de votre dépôt DRIFT. Le minimum pour cette paire est d'environ 1 600 DRIFT. Saisissez un montant dans le champ de conversion ci-dessus pour obtenir un cours en temps réel ; aucun compte n'est requis.
Two tokens, two chains, two fee coins
This pair moves between governance tokens of two DeFi projects that sit on different chains. DRIFT is an SPL token on Solana. UNI, the Uniswap token, is an ERC-20 token on Ethereum. Neither one pays its own network fees.
That shapes the whole swap. To send DRIFT you need SOL in the same wallet, because Solana charges every transfer in SOL. On the other end, UNI arrives without any ETH, but you need ETH in that 0x wallet before you can send it, vote with it or put it to use in an app.
So before you start, check two balances, not one: some SOL beside your DRIFT now, and a plan for ETH beside your UNI later. People who skip the second check often find the UNI sitting in MetaMask with no way to move it. If you need ETH as well, a separate DRIFT à ETH swap gets it from the same DRIFT balance.
Sending DRIFT from a Solana wallet
In Phantom, Solflare or a Ledger, pick DRIFT in the token list and send it to the one-time deposit address. Do not send SOL by accident: both sit at the same Solana address, and the wallet will happily send whichever one you select.
The deposit settles on Solana in under a minute. The fee is tiny but it must be paid in SOL, so a wallet with zero SOL cannot send the DRIFT at all. Top it up first if needed.
The sender field wants the Solana address the DRIFT leaves from. Expect 32 to 44 base58 characters and no 0x at the start. Use your own wallet, not an exchange withdrawal, because that address is where a refund goes. You can follow the deposit on Solscan by pasting the transaction signature.
The 0x address for your UNI
The payout is UNI on Ethereum mainnet, so the address must start with 0x followed by 40 hexadecimal characters. MetaMask, Rabby and a Ledger all give one. There is no Solana version of UNI on this pair, so a Solana address cannot go in this field.
Some multi-chain wallets show both a Solana address and an Ethereum address in one app. That is fine, as long as you copy the 0x one for this field and the Solana one for the sender field. Mixing them up is the classic error on this page.
Your 0x address is also valid on Ethereum layer-2 networks, but the UNI lands on mainnet. If MetaMask is set to Arbitrum or Base, the balance will not show until you switch to Ethereum. Once it arrives, Etherscan lists it under the address's token holdings, and Ethereum confirms the payout in about 2 to 5 minutes.
DRIFT and UNI at a glance
| DRIFT (you send) | UNI (you receive) | |
|---|---|---|
| Type de jeton | Jeton SPL sur Solana | Jeton ERC-20 sur Ethereum |
| Adresse | Base58, 32–44 long | 0x plus 40 caractères hexadécimaux |
| Frais payés en | SOL | ETH |
| Cherchez-le sur | Solscan | Etherscan |
| Typical wallet | Fantôme ou Solflare | MetaMask or Rabby |
| S'installe | Moins d'une minute | À propos des minutes 2 à 5 |
Not one line of this table matches across the two columns, so one address or one fee coin cannot serve both ends. The fee rows matter most: DRIFT needs SOL to leave, UNI needs ETH to move again. Ethereum gas is usually higher than Solana fees, so plan a bit more for the UNI side if you expect to move it soon.
Why people rotate DRIFT into UNI
The usual reason is a change of focus. Someone who held DRIFT on Solana wants exposure to a governance token on Ethereum instead, or wants a token that more Ethereum apps accept. Doing it through a bridge would mean a wrapped asset and an extra step; this swap pays native UNI.
The rate for that comes from aggregated liquidity from leading crypto markets. The exchange box shows the UNI amount after fees for the DRIFT you enter, and it floats with the market until your Solana deposit confirms. Minimum and maximum amounts for DRIFT to UNI appear in the box too.
Once the deposit confirms, most swaps finish within minutes. No account, email or ID is involved: GhostSwap is a no-KYC crypto exchange, and the form only needs your two addresses. Heading back later? UNI à DRIFT is the reverse pair.
Remboursements et assistance
If a swap cannot be completed, the coins are refunded to the sender address you entered. Here that is your Solana address, and the refund comes back as DRIFT, so it should be a wallet you control.
Two things cause most trouble on this pair: sending a different amount than the box showed, and sending SOL instead of DRIFT. Check the token name and the amount on the confirm screen in Phantom or Solflare before you approve.
Each step of the swap appears on the status page linked to your swap ID. Should Solscan confirm the DRIFT reached the deposit address while the status page sits unchanged for hours, send support@ghostswap.io the swap ID plus your Solana signature. Do not repeat the deposit.
Erreurs courantes
- Sending SOL instead of DRIFT because both sit at the same Solana address.
- Trying to send DRIFT from a wallet that has no SOL for the Solana fee.
- Pasting a Solana address into the UNI field; the payout needs an Ethereum 0x address.
- Looking for the UNI on Arbitrum or Base in MetaMask instead of Ethereum mainnet.
- Leaving the 0x wallet without ETH, so the UNI cannot be moved after it arrives.
Vous allez dans l'autre sens ? ![]()
Échanger UNI à DRIFT
Graphique des prix en direct de DRIFT à UNI
DRIFT/UNI
Prix de référence du marché, mis à jour en direct
Comment échanger Drift contre Uniswap
Sélectionnez DRIFT et UNI
Sélectionnez DRIFT dans « Vous envoyez » et UNI dans « Vous recevez », puis saisissez le montant. La case affichera le montant d'UNI que vous recevrez ainsi que le DRIFT minimum pour cette paire.
Entrez l'adresse Uniswap
Saisissez l'adresse Ethereum qui doit recevoir les UNI (elle commence par 0x suivi de 40 caractères hexadécimaux). Indiquez ensuite l'adresse Solana depuis laquelle vous envoyez les DRIFT ; un éventuel remboursement y sera effectué.
Envoyer une dérive
Envoyez le montant exact indiqué depuis votre portefeuille Solana à l'adresse de dépôt unique. Conservez un petit solde de SOL dans ce portefeuille pour couvrir les frais de réseau.
Recevoir Uniswap
Vos UNI sont versés une fois votre dépôt DRIFT confirmé, puis Ethereum le confirme sous 2 à 5 minutes environ. La plupart des échanges sont finalisés en quelques minutes. Le délai exact dépend de la rapidité de confirmation de votre dépôt par chaque réseau. Suivez chaque étape sur la page de statut avec votre identifiant d'échange.
DRIFT vers l'université : questions et réponses
Tout ce que vous devez savoir sur l'échange de DRIFT contre UNI sur GhostSwap.